Sungale DPF710 Quick Start Manual

Model: DPF710 2 Buttons and jacks Getting Started Connecting your DPF with power by using the power adapter provided. The DPF will start up and go to main menu. 5 6 7 1 2 3 4 1. Play / Pause: Press to enter / confirm; Press to pause when slideshow pictures and press again to continue slideshow. Thank you for your purchasing of Sungale digital photo frame. This quick start guide will help you setup and start using the player as quickly as possible. 6. USB: Insert a USB flash stick. 3. : Back to home menu. 5. : Back to last step. 4. SD/SDHC: Insert one of the SD/SDHC cards each time. 7. 5V DC IN: Insert the power adaptor cord to connect the unit with power outlet. 2. Right / Left / Up / Down: Press to move cursor right /Left /Up / Down. Photo Calendar Setting

1. Visit the support site. For manual download and FAQs: www.sungale.com Toll Free Call in the USA: 800-473-5156 Service email: [email protected] Setting What you can setup Calendar and Clock You can also insert a USB flash disk which has pictures to the USB slot to play pictures stored in the USB. The digital photo frame will auto slideshow pictures in your card or USB which has been inserted. Keep pressing Exit button on remote control to exit to the main menu. Loading photos from memory card or USB Insert one of the SD/SDHC card to your digital photo frame by following the direction showed as below: SD/SDHC Press Home ( ) button LEFT/RIGHT button to move cursor to Setting, then press Enter (Play/Pause). There will be 3 icons listed. From top to bottom, they are Photo Setup, Calendar Setup and System Setup respectively. You may press Up button or Down button to select one of the icons, and press Enter (Play/Pause) to enter the detailed setup options (press Exit to return), then press Up/Down to choose what you want to set, and press Left/Right to change the settling. Press Exit after finish the setting. You can setup slideshow interval time, transition effect, show type in fit screen or full screen, browse in thumbnail mode or Browse Mode, play repeat mode, photo auto play or not, brightness and contrast, TFT saturation, OSD language and restore all of the settings to factory default setting by selecting Default in Setting. In Setup setting (start up setting), choose Calendar Setup and confirm. Then you will enter the interface with four options: Display Mode, Set Date, Clock Mode and Set Time. Press Up/Down to select Date and press Left/Right to set Date. Press Exit button to go to the main menu interface after setting. You may follow the same steps to setup Clock. Photo Calendar Setting