Stormshield SN150 Manual 

On these products, data is stored on an internal hard disk. Dismantling 1. Using the Phillips screwdriver, unscrew the 2 black countersunk screws located at the back of the cover. 2. Remove the cover by sliding it backwards. This operation will tear the warranty sticker. IMPORTANT Closely follow the instructions and precautions for handling the hard disk given in the vendor’s installation guide. 3. Locate the hard disk. 4. Remove the adhesive strip from the hard disk. 5. Unplug the SATA connector. 6. Unscrew the 4 fastening screws of the hard disk with a Philips screwdrive ...

On these products, data is stored on an internal Flash module. Dismantling 1. Unscrew the 4 black countersunk screws (3 for the SN160) with a Philips screwdriver. One of these screws covers the warranty sticker. 2. Open the appliance. This operation will tear the warranty sticker. 3. Remove the strip of white glue: 4. To extract the flash module, pull it gently and perpendicular to the motherboard. Assembling 1. Put both parts of the appliance back together. 2. Close it up using the 4 screws (3 for SN160). SNS - TECHNICAL NOTE SECURE RETURN OPTION Page 8/28 sns-en- ...

2. Unscrew the 2 black screws that hold the DIN rail bracket in place: 3. Remove the bracket. 4. Unscrew the 14 black screws found on the appliance. 5. Open the appliance. SNS - TECHNICAL NOTE SECURE RETURN OPTION Page 22/28 sns-en-secure_return_option_technical_note - 10/10/2020 ...

On these products, data is stored on one or two SSDs accessible from the front panel. Each SSD can be easily extracted: to unlock its tray, press on the gray button while pushing it laterally towards the left. Other data is stored on an internal flash module. Dismantling 1. Unscrew the 13 black countersunk screws of the upper cover with a Philips screwdriver. 2. Open up the appliance by pushing the cover towards the back and removing it. This operation will tear the warranty sticker. 3. Locate the Flash module: 4. To extract the flash module, pull it gently and perpendicular ...

Dismantling 1. Using the Phillips screwdriver, unscrew the 2 black countersunk screws located at the back of the cover. 2. Remove the cover by sliding it backwards. This operation will tear the warranty sticker. IMPORTANT Closely follow the instructions and precautions for handling the hard disk given in the vendor’s installation guide. 3. Locate the hard disk: 4. Remove the adhesive strip from the hard disk 5. Unplug the SATA connector. 6. Using the Phillips screwdriver, unscrew the 4 fastening screws from the hard disk supp ...

SECURE RETURN OPTION Page 3/28 sns-en-secure_return_option_technical_note - 10/10/2020 ...

On these products, data is stored on one or two SSDs accessible from the front panel. Each SSD can be easily extracted: to unlock its tray, press on the gray button while pushing it laterally towards the left. Other data is stored on an internal flash module. Dismantling 1. Unscrew the 9 black countersunk screws with a Philips screwdriver. 2. Open up the appliance by pushing the cover towards the back and removing it. This operation will tear the warranty sticker. 3. Locate the Flash module: 4. Unscrew the fastening screw of the Flash module with a Philips screwdriver, by kee ...