StarTech.com USB221SS Instruction Manual

FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com Manual Revision: 03/26/2013 For the most up-to-date information, please visit: www.startech.com Packaging Contents • 1x USB 3.0 Sharing Switch • 2x 1m USB 3.0 A-B Cables • 1x Instruction Manual System Requirements • Available USB 3.0 Port on each computer • USB cable to connect your peripheral to the switch USB221SS 2 Port 2-to-1 USB 3.0 Peripheral Sharing Switch – USB Powered Installation Before installing, please note that the USB221SS switch does not require any software or drivers to be used, however the peripheral that you are sharing between connected systems (printer, scanner, etc.) might. Please ensure that you have installed the latest drivers for your peripheral onto both systems before connecting to avoid detection/functionality issues. 1. Connect your USB peripheral device to the USB A port on the switch 2. Using the provided USB 3.0 A-B cable and with the computer powered on, connect your first PC to the sharing switch and allow the computer to detect 3. Using the second provided USB 3.0 cable and with the computer powered on, connect your second system to the switch and allow the computer to detect 4. The LEDs on top of the switch will indicate which computer is currently selected, use the push-buttons to switch from one to the other *actual product may vary from photos

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders. Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. Specifications Color Black Enclosure Type Plastic Device Port 1x USB 3.0 A (9 pin; SuperSpeed) Female Host Ports 2x USB 3.0 B (9 pin; SuperSpeed) Female Maximum Data Transfer Rate USB 3.0 - 5 Gbit/s Maximum Cable Length 1 m / 3.3 ft OS Compatibility OS Independent – no software or drivers required Port Selection Push-button LED Indicators 2x Computer selection indicators Dimensions (LxWxH) 69 x 42 x 22mm Weight 40 g Operating Temperature 0°C to 40°C (32°F to 104°F) Storage Temperature -20°C to 60°C (-4°F to 140°F) Humidity 0~80% RH *actual product may vary from photos NOTE: The total cable length from host system to your connected peripheral should not exceed 2.5m (8.2ft) If your system does not detect the connected peripheral, or the peripheral is not working properly please ensure that you have installed drivers for your peripheral as indicated above, and that all cables are securely connected. If the USB switch itself does not light up or is not indicating the correct PC selection, please disconnect and re-connect your PC cables as it will re-initialize the device.