SportsArt Fitness S925 Owner's Manual

Le produit SportsArt a été conçu et fabriqué afin d’assurer une sécurité optimale. Cependant certaines précautions s’appliquent chaque fois que vous utilisez votre produit. • Lisez entièrement le manuel avant l’assemblage et l’utilisation. Veuillez aussi noter les consignes de sécurité suivantes: • Veuillez lire attentivement les instructions et installer le produit selon les instructions. • Assemblez et faites fonctionner le produit sur une surface solide et plane; NE PAS l’utiliser à l’extérieur ou près de l’eau. � ...

schedule, task list, and log. MAINTENANCE Machine Maintenance 1. Please clean and lubricate the guide rod once a week. (a). Use a clean, lint-free towel to apply the lubricant onto the guide rods. (b). Test the weight stack on the guide rod and make sure the operation is smooth. (c). Repeat operations (a) and (b) 2 to 3 times. 2. Check the tightness of the cable or belt and follow the steps to make adjustments. ...

No. Name Qty. Specification Notes 10 Push revits 6 L-shaped Allen wrench 2 M5 Double open-end wrench 1 8*17 Double open-end wrench 1 17*23 Components on the Product No. Name Specification Notes 20 Hex screw M10*P1.5*L30 Spring washer M10 Washer D16*d10.2*t1.0 Nylon hex nut M10*P1.5 21 Plastic round head hex screws M6*P1.0*L20 ...

Assembly Parts No. Name Qty. No. Name Qty. A1 Weight Stack Frame 1 A6 Weight Stack Back Cover 1 A2 Seat Frame 1 A7 118 Oval Foot Cover A 3 A3 Foot Frame 1 A8 118 Oval Foot Cover B 3 A4 Connecting Tube 1 A9 Storage Tray 1 A5 Weight Stack Front Cover 1 ...

(a). Attach both front and back weight stack covers (A5)(A6) onto the weight stack frame (A1). (Note: before the attaching the front weight stack cover (A5), make sure the inside hanger is hooked to the frame before securing it to the weight stack frame.) (b). Attach the oval foot covers (A7)(A8) onto the seat frame (A2) legs. Align the ends before use push revits (10) to secure the foot covers together. Note: While installing the oval foot covers, if the holes don’t match up, please change the direction of the covers. The cutout should face the inne ...

* When adjusting the seat height, pull the seat lever to adjusted to the desired height and then release the seat lever. * If the machine has not been used for a long time or the seat is adjusting slowly. Please put presuure on the seat several times before normal operation. ...

(a). Attach both front and back weight stack covers (A5)(A6) onto the weight stack frame (A1). (Note: before the attaching the front weight stack cover (A5), make sure the inside hanger is hooked to the frame before securing it to the weight stack frame.) (b). Attach the oval foot covers (A7)(A8) onto the seat frame (A2) legs. Align the ends before use push revits (10) to secure the foot covers together. Note: While installing the oval foot covers, if the holes don’t match up, please change the direction of the covers. The cutout should face the inne ...