Sony BKSR-2020 Operating Instructions

BKSR-2020 ANALOG MPEG ENCODER BOARD BKSR-2021 MPEG HD ENCODER BOARD BKSR-2025 SDI MPEG DECODER BOARD BKSR-2030 ANALOG MPEG DECODER BOARD BKSR-2031 MPEG HD DECODER BOARD BKSR-2035 •ご使用にあたっては、マルチアクセスビデオ& オーディオサー バーVSR-2000/ 2000Aに付属の取扱説明書の「安全のために」 をよくお読みください。 • ボードやディスクユニットを誤って装着すると、火災・感電やその 他の事故により、けがをしたり周辺の物品に損害を与えたりする ことがあります。危険を避けるため、装着はサービストレーニング を受けた技術者にご依頼ください。 本機を装着する技術者へ 装着のしかたについては、BKSR-2021/ 2025/ 2030/ 2035/ 2070/ U2000はそれぞれに付属の「インストレーションマニュアル」を、その 他の機種はVSR-2000/ 2000Aに付属の「インストレーションマニュア ル」をご覧ください。 3-867-801-06(1) 取扱説明書 Operating Instructions  1999 Sony Corporation Printed in Japan 概要 これらの製品は、マルチアクセスビデオ& オーディオサーバー VSR-2000/ 2000A 用のオプション基板、HDD ユニット、アップグ レードキット、およびラックマウントキットです（BKSR-2070、BKSR- U2000はVSR-2000専用、BKSR-2025、BKSR-2035、BKSH-272Gは VSR-2000A 専用です）。 ◆VSR-2000/ 2000Aに付属の「取扱説明書」を併せてご覧ください。 注意 (BKSR-2020/2021/2025/2030/2031/2035/2070) この装置は、情報処理装置等電波障害自主規制協議会（VCCI）の 基準に基づくクラスA情報技術装置です。この装置を家庭環境で使 用すると電波妨害を引き起こすことがあります。この場合には使用 者が適切な対策を講ずるよう要求されることがあります。 100BASE-T INTERFACE BOARD BKSR-2070 UPGRADE KIT BKSR-U2000 36GB HDD UNIT BKSH-236G 73GB HDD UNIT BKSH-272G RACK MOUNT KIT RMM-2000

2030/2031/2035/2070) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. This Class A digital device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Precautions If these products are installed incorrectly, personal injury or damage to peripheral items may occur due to fire, shock, or other accidental circumstances. To avoid such risks, installation should be performed by trained service technicians. To technician installing the boards/units For the BKSR-2021/2025/2030/2035/2070/U2000, please refer to the installation manual supplied with that model for installation instructions. For other models, please refer to the installation manual of the VSR-2000/2000A Multi Access Video and Audio Server. Introduction These products are optional boards, upgrade kit, hard disk units, upgrade kit and rack mount kit designed for the VSR-2000/2000A Multi Access Video and Audio Server. (The BKSR-2070 and BKSR-U2000 are exclusive for the VSR-2000, and the BKSR-2025, BKSR-2035, and BKSH-272G are exclusive for the VSR-2000A.) Please refer to the operating insturctions supplied with the VSR- 2000/2000A for your assistance. For customers in Canada This Class A digital apparatus complies with Canadian ICES- 003. Pour les utilisateurs au Canada Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. For the customers in Europe (BKSR-2020/2021/2025/ 2030/2031/2035/2070/U2000, BKSH-236G/272G) This product with the CE marking complies with the EMC Directive (89/336/EEC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European standards: • EN55103-1: Electromagnetic Interference (Emission) • EN55103-2: Electromagnetic Susceptibility (Immunity) This product is intended for use in the following Electromagnetic Environment(s): E1 (residential), E2 (commercial and light industrial), E3 (urban outdoors) and E4 (controlled EMC environment, ex. TV studio). Pour les clients européens (BKSR-2020/2021/2025/2030/ 2031/2035/2070/U2000, BKSH-236G/272G) Ce produit portant la marque CE est conforme à la Directive sur la compatibilité électromagnétique (EMC) (89/336/CEE) émise par la Commission de la Communauté Européenne. La conformité à cette directive implique la conformité aux normes européennes suivantes: • EN55103-1: Interférences électromagnétiques (émission) • EN55103-2: Sensibilité électromagnétique (immunité) Ce produit est prévu pour être utilisé dans les environnements électromagnétiques suivants: E1 (résidentiel), E2 (commercial et industrie légère), E3 (urbain extérieur) et E4 (environnement EMC contrôlé, ex. studio de télévision). Für Kunden in Europa (BKSR-2020/2021/2025/2030/2031/ 2035/2070/U2000, BKSH-236G/272G) Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt die EMV-Direktive (89/336/EEC) der EG-Kommission. Die Erfüllung dieser Direktive bedeutet Konformität für die folgenden Europäischen Normen: • EN55103-1: Elektromagnetische Interferenz (Emission) • EN55103-2: Elektromagnetische Empfindlichkeit (Immunität) Dieses Produkt ist für den Einsatz unter folgenden elektromagnetischen Bedingungen ausgelegt: E1 (Wohnbereich), E2 (kommerzieller und in beschränktem Maße industrieller Bereich), E3 (Stadtbereich im Freien) und E4 (kontrollierter EMV-Bereich, z.B. Fernsehstudio).