PROception proAMP310X Instruction Manual
Text of the manual
2 Year Guarantee
This guarantee covers failure of your PROception product resulting from manufacturing defect within a
period of 2 years from the date of supply to the end-user. This guarantee does not cover damage to the
product caused by abuse, tampering, defective installation or natural causes such as lightning discharge.
Repair or attempt
Fig.1(a) example Mode 1 application with remote power unit.
Fig.1(b) example Mode 1 application with local power unit and showing optional use of UHF preamplifier
and output splitter
Preamplifier Power Option
Line-power for a masthead or similar preamplifier is available at the UHF input in Mode 1. The
amplifier provides approximately 5V with a current rati
1. UHF signal handling capability is given for 5 analogue TV channels plus up to 6 DTT
multiplexes at ≤ -14 dB relative level.
2. The first (higher) figure is for analogue signals and the second (lower) is for digital (16– or
64-QAM).
3. Rejection figures are given relative to the nominal passband gain.
4. Absolute minimum voltage, measured to
General Instructions for both Mode 1 & 2
Signal Connections
To preserve RF screening integrity, the signal connections to the amplifier should be made using
good quality coaxial cable and connectors. This is particularly important with DTT to minimise the
ingress of impulsive electrical interference. The use of cable benchmarked under the CAI scheme
is recom
