Datamax Ex2 Operation & User’s Manual
Text of the manual
Congratulations on your purchase of the Ex2 printer. The Ex2 hereafter referred to as ‘the
printer’, blends quality and durability into an affordable package with state-of-the-art
electronics and user-friendly features to redefine the standard in thermal printers. The printer
uses a unique one button design to simplify operation, while its USB, RS232 serial, and
parallel interfaces allow easy connection to your host system.
This manual provides all the information necessary to
operate the printer.
To print labels or tags simply refer to the instructions
included with the software you have chosen to create the
labels. A Windows® printer driver can be found on our
website (www.datamaxcorp.com) or on the included CD-
ROM. If you wish to write a custom program, a copy of
the 'Class Series Programmer’s Manual' can also be
found on the CD-ROM.
The printer is powered by an external power supply
that connects as shown. Connect the power cord to
the printer first and then plug the other end into a
suitable AC outlet.
Use only the power supply shipped with the printer.
The printer can be connected to the host via a USB, serial or parallel cable.
The Printer will automatically connect to the first port (USB, serial or parallel)
that transmits valid data. After this connection has been made, the printer’s
power must be cycled Off and On to change the interface connection.
USB Connection: The USB Interface is supported in Windows 95 and
greater. Depending upon the operating system of your host computer,
installation may differ slightly.
Parallel Connection: The parallel interface requires a standard parallel
cable with a 36 pin male connector.
