SolidRF BuildingForce 4G-X Manual
Text of the manual
SolidRF BuildingForce 4G-X
Cell Phone Booster Manual
If you have any questions or concerns when
installing or operating your cell phone booster,
please email us:
[email protected]
Please provide the invoice of your product in
your email. Or visit www.SolidRF.ca for more
information.
Systems tested and certified against FCC
standard, Equipment Class: Part 20
AC Adapter Port
Product Diagram
OUTSIDE
Antenna Connector
Control Panel
See Control Panel Instruction
Package Contents
• SolidRF BuildingForce 4G-X Booster
• Inside Antenna
• Outside Antenna
• Lightning Surge Protector
• Inside Cable (75 ft)
• Outside Cable (60 ft)
• Power Adapter
• Antenna Pole
Features
�
Test Installation - MUST BE READ
Where to install the outside antenna? The position,
where the outside antenna is installed, it can bring a
significant impact on the booster performance.
To point directly the cell tower, it aims to receive the best
signal and prevent the signal interference.
The higher position, it might avoid the impact caused by
the big
STEP BY STEP INSTALLATION
Step 1: Mount the outside antenna
a. Choose right position
• Find the strongest signal position in the
possible install locations by reading your cell
phone signal bar (see Find Strongest Signal)
• 30 cm away from any other metallic objects
• 100 cm away from any windows
b. Mount the antenna pole
c.
Mount the antenna to the po
b. Connect the outside antenna’s connector to
the port labeled “OUTSIDE” on the booster
c.
Connect the inside antenna’s connector to
the port labeled “INSIDE” on the booster
Step 4: Power on the booster
• Plug the power adapter into the power port
on the booster.
• Then plug into a surge protector power strip.
WARNING:
• Do NOT cover the bo
