SKYDANCE T20 Installation Instructions

● Each zone can remote control multiple Skydance’s 2.4G LED controllers. ● Ultra sensitive high strength glass touch panel. ● Touch keys with chord tones and LED indicator. ● Free installation, no wiring, removable. ● AAA x 2 attery powered. b ● White & Black glass panel available. User Manual Ver 1.0.6 Technical Parameters Model No.: T20,
T20-1,
T20-2,
T20-3
1-4 Zone dimming switch/Glass touch panel/Wireless remote 30m distance/AAA x 2 battery Features Page 1 Mechanical Structures and Installations Wall Mounted Touch Panel LVD RED ON key Short press: Turn on the light of each zone. Long press(1-6s): Dimming up when light is on. OFF key Short press: Turn off the light of each zone. Long press(1-6s): Dimming down when light is on. Long press(5s) : Turn on or turn off tone when light is off. Zone1 Zone1 Zone2 Zone1 Zone2 Zone3 Zone1 Zone2 Zone3 Zone4 T20 T20-3 T20-2 T20-1 Key function 1 Zone switch 2 Zone switch 3 Zone switch 4 Zone switch Input and Output Warranty 5 years Warranty Operation temperature Case temperature (Max.) Environment IP20 IP rating Ta: -30 OC ~ +55 OC T c: +65 OC Output signal RF 2.4GHz ( ) Working voltage 3VDC AAA x 2 ( ) Working current ＜5mA Standby current ＜20μA Standby time 1 year Remote distance 30m Safety and EMC EMC standard (EMC) EN301 489,EN 62479 Radio Equipment(RED) EN300 328 Certification CE,EMC,LVD,RED EN60950 Safety standard(LVD) Typical base as below: European style 86 size Touch panel Baseplate Base Uninstall Installation diagram: 86.00 mm 86.00 mm 61.00 mm 61.00 mm 20.50 mm Installation rack Battery compartments To fix the panel, two options are offered for selection: Option 1: fix it on the wall with two screws. Option 2: adhere it to the wall with paster. Weight 0.160kg Gross weight Net weight 0.190kg www.iskydance.pl

Use the controller’s Match key Match: Short press match key, immediately press ON key of the touch panel. The LED indicator fast flash a few times means match is successful. Use Power Restart Match: Switch off the power of the receiver, then switch on power again, immediately short press ON key 3 times on the touch panel. The light blinks 3 times means match is successful. . Delete: Switch off the power of the receiver, then switch on power again, immediately short press ON key 5 times on the touch panel. The light blinks 5 times means all matched remotes were deleted. Delete: Press and hold match key for 5s to delete all match. The LED indicator fast flash a few times means all matched remotes were deleted. End user can choose the suitable match/delete ways. Two options are offered for selection: User Manual Ver 1.0.6 Page 2 T20,
T20-1,
T20-2,
T20-3 Wall Mounted Touch Panel Safety information 1. Read all instructions carefully before you begin this installation. 2. When installing battery, pay attention to the battery positive and negative polarity. A long time without the remote control, remove the battery. When remote distance becomes smaller and insensitive, replace the battery. 3. If no response from the receiver, please re-match the remote. 4. Gently handle remote, beware of falling. 5. For indoor and dry location use only.