SIRETTA SNYPER-LTE Graphyte Quick Start Manual

+44 (0)118 976 9000 www.siretta.com Siretta Ltd, Basingstoke Road, Spencers Wood, Reading, Berkshire, RG7 1PW, UK Rev 1.8 6 SNYPER-LTE Graphyte with support cradle underneath PSU with 4 adapter heads 2x USB cables - 0.5m and 1.8m USB Car Charger Omni-directional Antennas - General Purpose (Black) and 2600MHz (Silver/Grey) Directional Antenna Extension Cable for Directional Antenna Tripod 1 2 3 4 5 6 SNYPER-LTE Graphyte Case Contents 7 8 3 4 5 5 7 8 1 2 2

www.siretta.com Siretta Ltd, Basingstoke Road, Spencers Wood, Reading, Berkshire, RG7 1PW, UK Rev 1.8 - SURVEY NEW SURVEY OPTIONS 1) Select Full, LTE, UMTS or GSM* 2) Select number of cycles and time interval 3) Connect charger to extend surveys 4) Press to start survey 5) Leave device to complete surveys POST SURVEY OPTION 1 1) Select ‘Show Results’ 2) Press to start LiveSCAN Use key to exit POST SURVEY OPTION 2 1) Select ‘Show Summary’ Use key to exit POST SURVEY OPTION 3 1) Select ‘Save Results’ This is only necessary if Auto Save is off Use key to exit - SAVED RESULTS STORED SURVEY 1) Select results file you wish to view 2) Select ‘Show Results’, ‘Show Summary’ or ‘Export Results’ Use key to exit - setup Language: ENG/DEU/FRA/ITA/SPA Display: Screen brightness, text colours and disk monitor Auto off: Auto switch off and dimming Documents: File types and Auto Save Sound: On/Off System: Mode and region of operation Set Time: Set date and time Factory reset: Return to default settings Use key to exit - ABOUT Key reference parameters about the device Use key to exit - PC connect PC CONNECT 1) Connect USB cable between device and PC 2) Select ON to enable USB connection, begin results download 3) Copy files required to PC 4) Select OFF to disable connection Use key to exit You can then view results files on your PC For more detailed information, please visit our website: www.siretta.com - first step before use BATTERY CHARGE Charge the unit for 4-6 hours or until the red charge light is extinguished. SOFTWARE UPDATE Go to https://www.siretta.com/snyper-plus to check for latest software. Your SNYPER is now ready to use SET TIME 1) Power up the SNYPER 2) Select ‘Setup’ from the ‘Main Menu’ 3) Select ‘Set Time’ 4) Use the keypad arrows to set date/time Use key to exit *The SNYPER-LTE Graphyte (USA) does not survey the GSM band.