SiliconDust TECH3 Operation Manual
Text of the manual
SiliconDust USA, Inc.
Tech/HDRack
Operations Manual
October 2, 2014
© SiliconDust USA, Inc. 2011-2014
TECH3 (dual tuner)
HDRack (8 tuner ATSC/QAM/DVB-T/DVB-C)
1. Power/Network
2. Tuner
3. Power
4. Ethernet
5. Coax in (ATSC/QAM/DVB-T/C)
HDRack (6 tuner CableCARD)
1. Power/Network LED
2. CableCARD LED
3. Tuner LEDs
4. Coax in (digital cable)
5. USB (for tuning adapter)
6. Ethernet
7. M-CARD
8. Power
All devices should be used with the included power supply (dual-tuner models) or power cable
(HDRack models).
Ethernet
Connect the Ethernet port(s) to a network switch. On models with multiple ports, all ports must be
connected in order for all tuners to be accessible. A single port can be directly connected to the network
interface on a PC to access t
Additional Tools and Software
Software Installation
The latest HDHomeRun drivers, code, and firmware can be found on the Silicondust website:
http://www.silicondust.com/downloads
Windows
Download and install the latest Windows release of the HDHomeRun software.
The HDHomeRun Setup wizard is optional.
When the installation process is complete it is recommende
Using the Command Line Configuration Utility (hdhomerun_config)
Open a command prompt or terminal window and change directory to the HDHomeRun installation
directory: "C:\Program Files\Silicondust\HDHomeRun\"
The list of supported commands can be obtained by running hdhomerun_config without any
parameters:
hdhomerun_config discover
