Pace TJ-70 Operation & Maintenance Instructions Manual
Text of the manual
For any questions regarding the following instructions, contact your local authorized
PACE dealer or contact PACE directly at:
Telephone (301) 490-9860, Fax (301) 604-9215
PACE Incorporated
9893 Brewers Court
Laurel MD 20723-1990
TJ-70
MINI THERMOJET HANDPIECE
PACE P/N 7023-0002
OPERATION & MAINTENANCE
INSTRUCTIONS
MANUAL NUMBER 5050-0349
REV. A
Additional copies of this manual or other PACE literature may be obtained from:
PACE Incorporated
(301) 490 - 9860
Sales Administration
(301) 4983252 Fax
9893 Brewers Court
Laurel MD 20723-1990
©1993 PACE Incorporated, Laurel MD. All rights reserved. Printed in the U.S.A.
PACE Incorporated has provided training on all of its products since 1958
as well
This manual details the basic operational guidelines for using the TJ-70 Mini ThermoJet
handpiece. A detailed Operation & Maintenance Manual For Accessories (P/N 5050-
0350) is available from PACE.
CAPABILITIES
The TJ-70 Mini ThermoJet Handpiece provides safe, continuous flow of precision
focused hot air for component installation and SMT land preparation
AIR HOSE CONNECTION
The Traditional Method of attaching the Air Hose from the power source is best
suited for use with the TJ-70.
NOTE
Ensure that no Air Hose is connected to the SNAP-VAC Port when using
the TJ-70 handpiece. The TJ-70 Air Hose must be connected to the
Controllable PRESSURE Port. Attachment to both ports simultaneously
will cause a deteri
Tip selection is very important. Referring to the list of Available Tips (Table III),
select the appropriate tip for your application.
The following instructions are for tip installation only. If a tip is currently installed in
the handpiece, follow the “Tip Removal” procedure prior to the installation of a new
tip.
1. Select the pro
