Yamaha PLG150-AN Owner's Manual

• VOICE Button Pressing the VOICE button calls up the AN Voice List dialog box, allowing you to select the desired voice bank and voice. It also allows you to reorganize the voices of a selected bank, as well as initialize a voice --- in other words, this resets all parameters to their normal values, giving you a “blank slate” voice to work with. To select a bank, click on the desired bank button: Preset 1, Preset 2, or User. Each bank contains 128 voices. To select a voice, click on the desired voice in the box. For a complete list of avai ...

This convenient feature lets you change the display of the main control panel to indicate the current status of certain signal routings within the PLG150-AN. When one of the options is enabled (a check mark appears), color-coded highlights, arrows and lines appear to show how the relevant blocks and parameters affect each other. Any or all of the three options below can be enabled. • Main Signal Flow When this is checked, the signal flow of the main blocks (e.g., VCO blocks into MIXER, MIXER into VCF, etc.) is shown. • Oscillator Sync Routing When this ...

• Unison Detune Range: 1 ... 32 When the UNISON switch is on, multiple sounds are played, with the pitch of each sound slightly detuned. Unison Detune adjusts the detuning of the VCO pitch in fine incre- ments, letting you create an even thicker Unison sound by applying higher settings; how- ever, be careful not to apply too much or you’ll change the basic pitch of the voice. • You can also adjust the value of this parameter with the left and right mouse buttons. Click on the parameter box, then click the left button to decrease the value, ...

Mix The mix wave is formed by a combination of saw and pulse waves. Triangle This is a conventional triangle wave. When Triangle is selected, all of the VCO 2 PWM parameters are unavailable, and are replaced with the X-MOD parameters. Sine This is a conventional sine wave. When Sine is selected, all of the VCO 2 PWM parameters are unavailable, and are replaced with the X-MOD parameters. • VCO 2 PITCH • VCO 2 FINE • VCO 2 EDGE These parameters are the same as those of VCO 1. • When the VCO 2 Wave is set to “Triangle” or “Sine,” the V ...