Yamaha PLG150-AN Owner's Manual

Range: -64 — +63 This determines the level of feedback output from the VCA that is returned (or “fed back”) into the input of the mixer, causing the signal to build up in amplitude according to the level you set. Higher values increase the Feedback level, resulting in a fatter sound. G Feedback should be applied slowly and with caution. Too much feedback can create extremely high frequencies, potentially resulting in damage to your speakers. G Too much feedback may drastically change the VCF characteristics. I VCF FmodDp (Filter Modulati ...

*1. The effect of the controller on the parameter value is either added or multiplied as indicated. Also, when two or more different controllers are simultaneously assigned and applied to the same parameter, the combined effect of the controllers on the parameter value follows the same rule (is either added or multiplied). *2. For these parameters, positive values decrease the time, making the EG rate faster. Parameter Name Ctrl Matrix : Parameter Ctrl Matrix : Calc. Method Ctrl Matrix : Source Free EG : Trk Param Group Param Name Data Value M ...

Address Size Data Parameter Description Default (H) (H) (H) (H) 5b 1 00...7F Ctrl Matrix Depth 8 Depends on Ctrl Matrix Param *6 40(+0) 5c 1 00...72 Ctrl Matrix Source9 off(0)...Assign Knob8(72) *6 0(off) 5d 1 00...2E Ctrl Matrix Param 9 off...PEG Attack(2E) *6 0(off) 5e 1 00...7F Ctrl Matrix Depth 9 Depends on Ctrl Matrix Param *6 40(+0) 5f 1 00...72 Ctrl Matrix Source10 off(0)...Assign Knob8(72) *6 0(off) 60 1 00...2E Ctrl Matrix Param 10 off...PEG Attack(2E) *6 0(off) 61 1 00...7F Ctrl Matrix Depth 10 Depends on Ctrl Matrix Param *6 40(+0) 62 1 00...72 Ctrl Matrix Sourc ...

*1. The effect of the controller on the parameter value is either added or multiplied as indicated. Also, when two or more different controllers are simultaneously assigned and applied to the same parameter, the combined effect of the controllers on the parameter value follows the same rule (is either added or multiplied). *2. For these parameters, positive values decrease the time, making the EG rate faster. Parameter Name Ctrl Matrix : Parameter Ctrl Matrix : Calc. Method Ctrl Matrix : Source Free EG : Trk Param Group Param Name Data Value M ...