Vivax Metrotech vLoc3 Series User Handbook Manual

2 vLoc3 Series Receivers The color of the confidence circle also changes depending on the degree of confidence: Green - Low distortion/high confidence. Blue - Minor distortion/medium confidence, so please proceed with care. Red - Excessive distortion/low confidence. Treat all data and measurements with caution. 7. Notice that vertical and horizontal distances from the target line are displayed. 1.43m 1.86m These must not be mistaken for the distance diagonally to the target, such information is not displayed. The vertical distance is the true depth from the bottom of the ...

5 Data Logging 5.3.8   Advanced Features The Advanced Features are available to those users in possession of a USB security dongle. If a dongle is attached to the PC, its level will be displayed on the MyLocator3 status bar. Three levels of security come with the dongle. Level one is for the end-user supervisors, level two for Vivax-Metrotech's distributors, repair centers, managers, and level three for Vivax-Metrotech use only. 5.3.8.1   Supervisor Lockouts This feature is available to anyone with a dongle (contact Vivax-Metrotech to purchase a dongle). When a do ...

8 Glossary 8.  Glossary Active Locate A locate where a transmitter is used to apply a signal to a buried pipe or cable, the position of which is then located by a receiver tuned to the same frequency. Active Signal A signal is applied by the locator transmitter to a buried line. Typical, this is a very precise frequency. Attenuation The reduction of an electromagnetic signal from a pipe or cable. Clamp (or Coupler) An accessory used to apply the transmitter signal to an insulated line, removing the need to connect the transmitter signal directly to a conductor or cable ...

2 vLoc3 Series Receivers The color of the confidence circle also changes depending on the degree of confidence: Green - Low distortion/high confidence. Blue - Minor distortion/medium confidence, so please proceed with care. Red - Excessive distortion/low confidence. Treat all data and measurements with caution. 7. Notice that vertical and horizontal distances from the target line are displayed. 1.43m 1.86m These must not be mistaken for the distance diagonally to the target, such information is not displayed. The vertical distance is the true depth from the bottom of the ...