ViTiny VT300 PLUS Operation & User’s Manual

 USB Source : the graphic will be presented under two circumstances. One is insert USB power supply without using battery, and the other is insert USB source and use full-charged. (F) Optical Digital Magnification : represents current magnification rate.  The optical zooming rate will be changed while adjusting the black indicator on the wheel of Focus. Please refer to the following. Low Mag.(L) High Mag.(H)  Digital magnification rate can be adjusted by the buttons of zoom out ( ) and zoom in ( ). The magnification is divided into ...

1.1 Packing Contents Objects packed inside the box include one host and seven accessories as follows. Please charge the Li-ion battery for 6 to 8 hours for the first time. Name Qty Name Qty Portable Microscope 1 Li-ion Battery 1 USB2.0 Cable 1 User‟s Guide 1 Adaptor 1 Clean Cloth 1 Calibrator 1 Wrist Strip 1 1.2 Functions of Microscope Microscope appearance is composed of buttons, transmission and storage interfaces. For the functions of interfaces, please refer to the following contents: ...

 USB Source : the graphic will be presented under two circumstances. One is insert USB power supply without using battery, and the other is insert USB source and use full-charged. (F) Optical Digital Magnification : represents current magnification rate.  The optical zooming rate will be changed while adjusting the black indicator on the wheel of Focus. Please refer to the following. Low Mag.(L) High Mag.(H)  Digital magnification rate can be adjusted by the buttons of zoom out ( ) and zoom in ( ). The magnification is divided into ...

magnification can be 155 times. Rates at different stages as follows: 30x optical rate [31* (1+0.5*stage)] Stage 1 2 3 4 Rate 46x 62x 77x 93x Stage 5 6 7 8 Rate 108x 124x 138x 155x Note: this formula is for 0-8 stages. (G) Digital Magnification Stage: digital magnification rates at different stages are listed as follows: 0 1 2 3 4 5 6 7 8 (H) Alignment in Range : press the button for a long time to display the sign of alignment in range, and press it again to shut down the sign. Use the sign to assist in aligning the observed arti ...

measurement from “Application Program”. The taken photo image quality will decide the accuracy on measurement. (If the taken photo is not clear or missing focus, then the measurement might not be correct.) It is suggested to key in all values from the look-up table before start measurement. To begin measurement, please open AP and choose “Measurement mode” see as below fig. Then, choose “Setting Ruler” After enter “Setting Ruler”, please create scale files according to different optical mag and digital stage enlarge ...

the image will not show if this function is activate. If want to show the Timestamp on the image, please turn off the scale function. (C) Auto Power Off ： This function can help you shut off the machine after a selected period of inactivity. Or to choose “never” to skip this function. (D) White balance : set white balance automatically for switching on and off. Automatic white balance can correct image‟s contrast and color. We suggest you switch on automatic white balance to achieve optimum result. (E) Sharpness ：Adjust ...