Crestron Wallmount Touchpanel Quick Start Manual

quickstart guide www.crestron.com ©2007 Specifications subject to change without notice For details, check the latest revision of the appropriate mounting kit Installation Guide for your touchpanel. QUICKSTART DOC. 6140D (2001953) 10.07 1 Crestron Touchpanels This guide covers mounting options and accessories for wallmount/surfacemount touchpanels. Mud Mount Kit (MMK) Use with BB or PMK installations to fill in larger irregularities around the opening. This option requires plastering. NOTE: The illustrations in this guide are representative of a mounting option or accessory type. The main difference in option/accessory types for each touchpanel series is size and, where applicable, the number of screws required. Pre-construction options - Back Box Kit (BB) and Pre-Construction Mount Kit (PMK) - are installed prior to hanging drywall or other wall surface material, and require access to an adjacent structural support (stud). The Trim Mount Kit (TMK) and Mud Mount Kit (MMK) accessories are used to correct irregularities in the holes cut in the mounting surface. NOTE: Make certain the template used to mark the opening in the mounting surface is level (if on a wall), or square to the front edge (if on a lectern). Cut the opening carefully, the mounting options provide for only minor position adjustment. 800.237.2041 201.767.3400 Crestron Touchpanels Trim Mount Kit (TMK) Use with BB or PMK installations for smaller irregularities around the opening. This option provides a smooth, finished appearance and is preferred when wallpaper is hung. Back Box Kit (BB) Use in installations where a back box is either required or preferred. Pre-Construction Mount Kit (PMK) Use in installations where a back box is not required or not preferred. Side mount Installations Front mount Installations

quickstart guide 2 Crestron Touchpanels Post-Construction Options Wall Mount Kit with Trim Ring (WMKT) Wall Mount Kit with Mud Ring (WMKM) Post-construction options (WMKT, WMKM, WMKB) are for mounting to finished walls or other surfaces where access to a structural support member (stud) is not possible or does not apply (e.g., lectern mount). Mounting Clips Mounting Screws Mounting Screws Mounting Brackets Wall Mount Kit - Bracket (WMKB) Used to correct larger irregularities around the opening. This option requires plastering. These kits are used to secure the touchpanel directly to the mounting surface without requiring an internal mounting plate . The specific mounting hardware used depends on the touchpanel. After installation, the mounting screws are hidden by the touchpanel bezel (not shown). Used to fill in smaller irregularities around the opening. This option provides a smooth, finished appearance and is preferred when wallpaper is hung. For details, check the latest revision of the appropriate mounting kit Installation Guide for your touchpanel. QUICKSTART DOC. 6140D (2001953) 10.07