SEFRAM SFX+NETWORK Technical Notice

FI 72.0239.0320E Page 103 / 108 … Dust emission faults. 1 bit by SV. Bit=1 if a fault is detected on a SV: 225 (224) E1 (E0) Dust emission faults on SV 1 to 16 (LSB: SV 1, MSB : SV 16) X 226 (225) E2 (E1) Dust emission faults on SV 17 to 32 (LSB : SV 17, MSB : SV 32) X 227 (226) E3 (E2) Dust emission faults on SV 33 to 48 (LSB : SV 33, MSB : SV 48) X 228 (227) E4 (E3) Dust emission faults on SV 49 to 64 (LSB : SV 49, MSB : SV 64) X 229 (228) E5 (E4) Dust emission faults on SV 65 to 80 (LSB : SV 65, MSB : SV 80) X 230 (229) E6 (E5) Dust emission faults on SV 81 to 96 (LS ...

FI 72.0239.0320E Page 104 / 108 296 (295) 128 (127) N° way of the step number 8 X X 297 (296) 129 (128) N° way of the step number 9 X X 298 (297) 12A (129) N° way of the step number 10 X X 299 (298) 12B (12A) N° way of the step number 11 X X 300 (299) 12C (12B) N° way of the step number 12 X X 301 (300) 12D (12C) N° way of the step number 13 X X 302 (301) 12E (12D) N° way of the step number 14 X X 303 (302) 12F (12E) N° way of the step number 15 X X 304 (303) 130 (12F) N° way of the step number 16 X X 305 (304) 131 (130) N° way of the step number 17 X X 306 (305 ...

FI 72.0239.0320E Page 62 / 108 DP THRESHOLD In the case of a configuration with a MDPP2000 on the bus (with “ID” number to 1), This menu step permits the setting of the different thresholds on this (see MDPP2000 notice) If the arrow is placed on DP THREHOLDS and if the button is pressed, the following display appears: The four values adjustment is the same. If the arrow is placed on the wanted step and if the button is pressed, the following display appears: Note: Protected by code! appears if protection is activated. To adjust the value, use buttons (in a no act ...

FI 72.0239.0320E Page 14 / 108 V – DIFFERENTS PLUG-IN MODULES COMMON CHARACTERISTICS Apart from the filter module mounted directly on the back panel, all the other modules can be plugged onto the 35 mm symmetrical DIN rail. ACCESS TO THE CONNECTIONS The connection terminals are accessed by opening the door of the module. A connection label specific to each type of module is affixed to the back of the door. To facilitate the connections, the door can be removed. Warning: always refit the door to the module when it has been removed DISASSEMBLY / ASSEMBLY Warning: Refer ...

FI 72.0239.0320E Page 100 / 108 80 (79) 50 (4F) Number of cells X 81 (80) 51 (50) Value timer T1 (from 3 to 255 1/100th of second) X X 82 (81) 52 (51) Value timer T2 (from 1 to 255 seconds) X X 83 (82) 53 (52) Value timer T2’ (from 1 to 255 seconds) X X 84 (83) 54 (53) Value timer T3 (from 0 to 255 seconds) X X 85 (84) 55 (54) Value timer T4 (from 0 to 255 seconds) X X 86 (85) 56 (55) Value timer T5 (from 0 to 255 seconds) X X 87 (86) 57 (56) Value timer T6 (from 0 to 255 seconds) X X 88 (87) 58 (57) Value timer T7 (from 0 to 255 seconds) X X 89 (88) 59 (58) Value timer ...

FI 72.0239.0320E Page 108 / 108 Cell isolation authorisation. 1 bit by cell. Bit=1 to allow isolation (nb: reserved special programming) 1098 (1097) 44A (449) cells n°1 to 16 isolation authorization (LSB :cell n°1, MSB :cell n°16) X X 1099 (1098) 44B (44A) cells n°17 to 32 isolation authorization (LSB :cell n°17, MSB :cell n°32) X X Cell first outlet damper closing request. 1 bit by cell. Bit=1 for close request (nb: reserved special programming) 1100 (1099) 44C (44B) cells n°1 to 16 first outlet damper closing request (LSB :cell n°1, MSB :cell n°16) X X 1101 ( ...