Vidicode V-Tap Analog Manual 

v1.17 © 2017-2021 Vidicode 1/4 The V-Tap Analog is a device that can record the audio from an analog telephone line or any telephone that works with a handset. The recorded calls are stored onto an SD card and can optionally be sent to an external server, which can be a Call Recorder Apresa or the V-Archive software running on a PC. NOTE1: The USB power supply needs to deliver 500 mA current, else the system does not start. NOTE2: When no analog line is connected or when no SD card is inserted, the Red LED starts flashing on first power on, to indicate an error situation. NOTE3: The SD card must be formatted with the FAT32 file system. Cards above 32 GB (up to 2 TB) are not tested and must be formatted as FAT32 first, before inserting them into the V-Tap. BOX CONTENT & DOWNLOADS • V-Tap Analog unit • USB adapter • USB cable • Telephone cable • SD card • 1 year Support & Update license • This Quick Guide • Manual: https://www.vidicode.com/download/v-tap-analog-manual-en/ • V-Archive PC software: https://www.vidicode.com/download/v-archive/

v1.17 © 2017-2021 Vidicode 2/4 HARDWARE INSTALLATION – 2 WAY’S TO CONNECT 1. On an analog line, in between the wall and the phone: 2. In between the handset and the phone: NOTE1: USB must be connected for power supply and must deliver 500 mA. NOTE2: An SD card must be inserted to store the recordings on (FAT32 formatted). NOTE3: Optionally connect the network for web access and/or Tunnel function. SETUP THROUGH THE WEB INTERFACE • When Wi-Fi is available and enabled on the V-Tap, search on your mobile phone or laptop for the name “V-Tap…”, connect to it using the 12 digits MAC address as the Wi-Fi password, found on the bottom of the unit. Then open a browser and enter the IP: 192.168.55.66 • When using a LAN cable, there are two ways to access the web interface: 1) Start a browser and enter in the address line http://vtapXXXX.local XXXX are the last 4 digits of the MAC address, found on the bottom of the unit. For this V-Tap, enter http://vtap019e.local 2) Or enter an IP address on the first line of the text file “IP”, put “IP.TXT” onto an SD card and insert the card into the V-Tap. Then enter this IP address in the browser. Login with username admin and password admin. See also the V-Tap Analog manual.

v1.17 © 2017-2021 Vidicode 3/4 PC REQUIREMENTS FOR THE V-ARCHIVE SOFTWARE Windows Vista/7/8/10 , Intel Pentium >2GHz , 4GByte RAM , >100 MB free disk space. V-ARCHIVE SOFTWARE INSTALLATION • In the case that no CD is supplied, you can download V-Archive from here: www.vidicode.com/download/v-archive/ • With a CD, place it in your computer and the software installation starts automatically. If it does not start, locate the file ‘VArchiveInstall.exe’ on the CD and start it manually. The following window appears: • Select your preferred language for the installation and press OK. • The menu will ask for an installation key, please enter: V-TAP • Now you can proceed with the next steps of the installation and you will be asked to confirm the locations on your hard drive where to store the software and the data files. • To setup V-Archive to receive data from the V-Tap, go to Options, Setup, Recording tab, and enable V-Tap connections: NOTE1: The PC’s IP address must be entered as the “Tunnel Server Address” in the V-Tap. NOTE2: The PC’s firewall must be open for TCP port 2016. The installer will try to do this automatically. NOTE3: The Encryption password must be the same as the “Encryption Password” in the V-Tap. NOTE4: The V-Archive software itself does not need channel licenses to receive from the V-Tap.

v1.17 © 2017-2021 Vidicode 4/4 CHECKLIST FOR TUNNEL CONNECTION A connection between the V-Tap and the V-Archive PC software (or Apresa recorder) is needed to get the recorded data automatically into a user accessible database. The following checklist can be used to setup this Tunnel connection: 1) Install the Hardware (see page 2). 2) Install the V-Archive software on a PC and enable V-Tap connections (see page 3). 3) Open the Settings page of the V-Tap in a browser by entering http://vtapXXXX.local XXXX are the last 4 digits of the MAC address, found on the bottom (see page 2). It may take up to a minute after first connect, before this local name is known to the PC. 4) The “Tunnel Server Address” must be filled in with the IP address or name of the PC. 5) Any firewall must be open for TCP port 2016, the default “Tunnel Destination Port”. During installation of V-Archive this port is automatically opened, if permitted by the PC. 6) The Tunnel connection to the PC is stable when the GREEN LED is steady, not blinking! Also, the V-Tap must be shown with its MAC address in the status line of V-Archive. 7) For first tests, better turn off “Tunnel Data Encryption”. Otherwise, be sure that the Encryption password is the same for both V-Tap and V-Archive. 8) When data is stored by the V-Tap during a call, the BLUE LED blinks. 9) To see if the PC receives something from the V-Tap, it is possible to make a network trace for test purposes. In V-Archive go to menu Actions and select ‘Network trace’, press Start, make a short call, wait 10 seconds, press Stop and then Save. From the zip file 'tunneltrace.pcap' can be analyzed with Wireshark. 10) The SD card in the V-Tap should contain “.WAV” files. The SD card can be read by V-Archive in menu File and ‘Import from V-Tap’.