Peak Controlmicro PNX13-10001 Operation & User’s Manual

10 Technical data Supply Power supply specification 24 V DC; 2.5 A Connection terminal, con- ductor cross section rigid: 0.14 mm² - 1.5 mm² flexible with wire end ferrule without plastic sleeve: 0.25 mm² - 1.5 mm² Power consumption Operation (Idle): 5 W Operation (Full load): 20 W Server operation without LCD: 3 W Ambient lighting: + 5 W Difference between min. and max. screen brightness: 4 W Computer system Processor Intel Quad-Core, fanless cooling by convection Memory (RAM) 4 GB Hard drive 64 GB eMMC, expandable by microSD Operating system Microsoft Windows ...

5 Important safety and handling information Warning The Controlmicro may only be installed and commissioned by qualified electricians! Warning Observe the national regulations applicable in your country regarding installation, func- tional testing, repair and maintenance of electrical products! ▪Observe the “Five Safety Rules“ (DIN VDE 0105, EN 50110) and apply them correctly: −Disconnect mains −Prevent reconnection −Test for absence of harmful voltages −Ground and short circuit −Cover or close off nearby live parts ▪Before installation, ...

3.6.2 Power supply The plug-in terminal for the voltage supply is designed for a conductor cross-section (rigid) from 0.14 mm² to 1.5 mm². The conductor cross-section (flexible) with wire end ferrule without plastic sleeve must be in the range of 0.25 mm² to 1.5 mm². 3.6.3 Ethernet port
Note: A cable of category CAT5e is recommended for using the 100 Mbit LAN connection, cable cross section 0.08 mm² to 0.5 mm². 3.6.4 Connections for external mouse and keyboard A USB 2.0 port type C is provided on the right side of the panel (portrait mount) to allow data ...

3.4 Touch panel elements Position Description 1 Microphone 2 Proximity sensor 3 Brightness sensor 4 Touchscreen 5 MicroSD card slot 6 Screw holes for fixing the panel 7 USB 2.0 Type C 8 Status LED: red: panel is shut down, green: panel is switched on ...

▪Unauthorized repairs or changes to the device 3 Product description The Controlmicro (short: panel) is a high-quality panel computer for wall mounting. It serves as a display and control unit for the KNX controlled components and installations of a building. 3.1 Software The panel can be operated both with the supplied YOUVI software and with other Windows- compatible software.
Note: PEAKnx provides no service and no warranty for software products from other com- panies as well as in case of OS driver updates. 3.1.1 Operating system The operating system used i ...

If you need to restart the panel after shutdown, there are 2 ways: a) Switch off the circuit breaker that is associated to the panel. −This procedure is suitable if the anti-theft screws are inserted. b) Disconnect the panel from the mounting plate so that the power supply is cut off. ▪Afterwards, reconnect the panel to the mounting plate or turn the circuit breaker back on. The panel starts. Switching Off ▪Tap the Windows logo on the Windows Start screen, select the On/Off icon and select the option “Shut down”. Activate keyboard input To automaticall ...

About PEAKnx As a manufacturer of innovative hardware and software components, PEAKnx develops products for future-proof building automation. For example, individual front-end panels including visuali- zation, which make all information of an intelligent building available at a central point. Great importance is attached to the longevity of the products and the qualitative interaction of design and functionality. As the newest division of the PEAK group headquartered in Darmstadt, Germany, PEAKnx can draw from more than 25 years of experience in hardware and software ...