Defy 831 Owner's Manual

• Set the timer to manual mode and the multi function knob to normal bake • Set the oven thermostat to the required temperature. The indicator light will glow and remain on until the oven has reached the selected temperature. • When the indicator light switches off, the food should be placed in the oven. • During cooking the indicator light will cycle on and off as the oven thermostat maintains the selected temperature • After completion, the thermostat and multi function knob must be returned to 0. Baking guide • Where possible, bake on the middle shelf positi ...

O LEFT FRONT LEFT BACK RIGHT BACK RIGHT FRONT PLATE CONTROLS AND PILOT LIGHTS 12 NOTE A variable grill option is catered for by selecting Turbo Grill and then setting the oven thermostat to the desired grill temperature Off position Fan only ( defrost) Thermofan cooking Conventional cooking Conventional grilling Turbo grilling STOP 12 :4 5 Oven light + _ AUTOMATIC OVEN TIMER / CLOCK BUTTON FUNCTIONS 1 = MINUTE MINDER 2 = COOKING PERIOD 3 = STOP TIME 4 = MANUAL CONTROL 5 = SUBTRACT 6 = AD ...

The food needs to be cooked for 2 hours at 180°C and it should be ready to serve at 18h00. Here’s what to do. • Ensure the clock is set to the correct time of day, 13.00. • Press buttons 2 and 6 until 02.00 is displayed • Press buttons 3 and 6 until 18.00 is displayed. Set the oven thermostat to 180°C and the multi function selector to Hint: It is not advisable to use the Autobake function for cooking periods that are less than 60 minutes. SWITCHING THE OVEN OFF AUTOMATICALLY Suppose you have to go out and you will not be back in time to ...

setting for the application. An indicator light will glow when the drawer has been switched on. • If food is to be kept warm for a lengthy period it is best to select a lower temperature. • Food left for too long in the warmer drawer could dry out and spoil. As a precaution food should always be covered, to minimise the drying effect. • The drawer can be removed for cleaning purposes. Pull the drawer out to the bump- stop, then lift the front slightly and continue pulling till the drawer slid ...