Panasonic PT-LB51NT Specifications

S P E C F I L E Product Number : PT-LB51NT Product Name : Micro-Portable Wireless LCD Projector As of May 2007. Specifications subject to change without notice.

As of May 2007 < 2 > Specifications Power supply Power consumption Optical system LCD panel Panel size Display method Drive method Pixels Pixel configuration Lens Lamp Colors Brightness Center-to-corner uniformity ratio Contrast ratio Resolution RGB Scanning frequency RGB YPBPR S-Video/Video Projection size Throw distance Optical axis shift Keystone correction range On-screen menu Installation Built-in speakers Size Output power Terminals COMPUTER (RGB) 1 IN RGB signal YPBPR signal COMPUTER (RGB) 2 IN/1 OUT RGB signal YPBPR signal VIDEO IN S-VIDEO IN COMPUTER AUDIO IN AUDIO IN AUDIO OUT SERIAL Power cord length Cabinet material 100–240 V AC, 50/60 Hz 240 W (approx. 4 W in standby mode with fan stopped.) Dichroic mirror separation/prism synthesis system 0.6˝ (15.24 mm) diagonal, micro lens array (4:3 aspect ratio) Transparent LCD panel (x 3, R/G/B) Active matrix 786,432 (1,024 x 768) x 3, total of 2,359,296 pixels Stripe Manual zoom (1:1–1:1.2), manual focus F 1.6 –1.9, f 18.8–22.6 mm 165 W UHM™ lamp Full color (16,777,216 colors) 2,000 lumens 85% 400:1*1 (full on/full off) 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.) Horizontal: 15.00–91.00 kHz, Vertical: 50–85 Hz 480i (525i): fH 15.75 kHz; fV 60 Hz 576i (625i): fH 15.63 kHz; fV 50 Hz 480p (525p): fH 31.50 kHz; fV 60 Hz 576p (625p): fH 31.25 kHz; fV 50 Hz 720/60p (750p): fH 45.00 kHz; fV 60 Hz 1080/60i (1125i): fH 33.75 kHz; fV 60 Hz 1080/50i (1125i): fH 28.13 kHz; fV 50 Hz NTSC, NTSC4.43, PAL-M, PAL60: fH 15.75 kHz; fV 60 Hz PAL, SECAM, PAL-N: fH 15.63 kHz; fV 50 Hz 838–7,620 mm (33–300 inches) diagonally, 4:3 aspect ratio 1.1 m–11.1 m (3´7˝–36´5˝) 6:1 (fixed) Vertical: approx. ±30° 17 languages: English, French, German, Spanish, Italian, Korean, Russian, Chinese, Japanese, Swedish, Norwegian, Danish, Portuguese, Polish, Hungarian, Czech, and Thai Front/rear, ceiling/desk (menu selection) 4 x 2 cm x 1, oval 1.0 W (monaural) D-sub HD 15-pin x 1 R, G, B: 0.7 Vp-p, 75 Ω, Sync on green: 1.0 V [p-p], 75 Ω, HD/SYNC, VD: TTL (positive/negative polarity compatible) Y: 1.0 V [p-p] (including sync signal), 75 Ω, PB, PR: 0.7 Vp-p, 75 Ω D-sub HD 15-pin x 1 (input/output selectable using on-screen menu) R, G, B: 0.7 V [p-p], 75 Ω, Sync on green: 1.0 V [p-p], 75 Ω, HD/SYNC, VD: TTL (positive/negative polarity compatible) Y: 1.0 V [p-p] (including sync signal), 75 Ω, PB, PR: 0.7 V [p-p], 75 Ω RCA pin x 1, 1.0 Vp-p, 75 Ω Mini DIN 4-pin x 1, Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 Ω M3 (L, R) x 1, 0.5 V [rms], for COMPUTER (RGB) 1 and 2 RCA (L, R) x 1, 0.5 V [rms], for VIDEO and S-VIDEO M3 (L, R) x 1, 0 – 2.0 V [rms] (variable) Mini DIN 8-pin x 1, for external control (RS-232C) 2 m/6.6´ Moulded plastic (PC + ABS)

As of May 2007 < 3 > Dimensions (W x H x D) Weight Operating environment Temperature Humidity Remote control unit Power supply Operation range*3 Dimensions (W x H x D) Weight Wireless LAN Standard Modulation IEEE 802.11b IEEE 802.11g Transmission system IEEE 802.11b IEEE 802.11g Transmission speed IEEE 802.11b IEEE 802.11g Operating range*2 Frequency range Channels Supplied accessories Optional accessories 297 x 57 x 210 mm (11-11/16˝ x 2-7/32˝ x 8-1/4˝)*2 1.9 kg (4.2 lbs.) 0°–40°C (32°–104°F) 20%–80% (no condensation) 3 V DC (AA battery x 2) Approx. 15 m (49´3˝) when operated from directly in front of the signal receptor 48 x 163 x 24.5 mm (1-7/8˝ x 6-13/32˝ x 31/32˝) 117 g (4.1 oz) (including batteries) IEEE 802.11b/g (ARIB STD-T66) Direct sequence spread spectrum (DS-SS) system Orthogonal frequency division multiplex (OFDM) system CCK (11/5.5 Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps) 64-QAM (54/48 Mbps), 16-QAM (36/24 Mbps), QPSK (18/12 Mbps), BPSK (9/6 Mbps) 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps Approx. 30 m (98´5˝) PT-LB51NTE/LB51NTEA: 2,412 MHz–2,472 MHz PT-LB51NTU: 2,412 MHz–2,462 MHz PT-LB51NTE/LB51NTEA: 1–13 ch PT-LB51NTU: 1–11 ch Power cord Wireless remote control Batteries for remote control VGA cable Carrying bag Wireless Manager ME 4.5 (CD-ROM) Replacement lamp unit: ET-LAB50 Ceiling mount bracket: ET-PKB50 Serial adapter (DIN 8-pin/D-sub 9-pin): ET-ADSER To use wireless functions, a PC is required that meets the conditions given below: OS: Microsoft® Windows® 2000 Professional, Windows® XP Professional, Windows® XP Home Edition, Windows Vista™ Ultimate 32-bit, Windows Vista™ Business 32-bit, Windows Vista™ Home Premium 32-bit, Windows Vista™ Home Basic 32-bit, Apple Mac OS X 10.4 NOTE: Some functions are not available with Windows Vista™ and Mac OS X. Web browser: Windows®: Internet Explorer 6.0 or later, or Netscape Communicator 7.0 or later. Macintosh: Safari 2.0 or later CPU: Windows®: Intel® Pentium® III or higher, or other compatible processor (800 MHz or higher is recom- mended). Macintosh: PowerPC G4 with 800 MHz or more, or Intel® Core™ Duo with 1.8 GHz or more. Memory: 256 MB or more (Macintosh: 512 MB or more is recommended) Free hard disk space: 60 MB or more CD-ROM drive: CD-ROM drive or DVD drive Wireless LAN: IEEE 802.11b/g compatible (built-in wireless LAN system or external IEEE 802.11b/g LAN card must be installed and running normally.) NOTE: Some IEEE 802.11g/b wireless LAN may not allow connection to the projector. *1: In AI mode. *2: Operation range differs depending on environments. Weights and dimensions shown are approximate. Specifications subject to change without notice. Weights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject to export control regula- tions. UHM is a trademark of Matsushita Electric Industrial Co., Ltd. Intel and Pentium are registered trademarks of Intel Corporation. Microsoft, Windows Vista and Windows are either registered trademarks or trademarks of Microsoft Corp. in the United States and/or other countries. Apple, Mac, Mac OS, Macintosh and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. All other trademarks are the property of their respective trademark owners. Projection images simulated.

As of May 2007 < 4 > Dimensions Terminals 81 (3-3/16˝) 181 (7-1/8˝) 210 (8-1/4˝) 39 (1-1/2˝) 69 (2-23/32˝) 69 (2-7/16˝) 57 (2-1/4˝) 7 (9/32˝) 297 (11-11/16˝) unit : mm (inch) NOTE: This illustration is not drawn to scale. 1 2 3 4 5 6 7 8 1 Serial 2 COMPUTER (RGB) 1 input 3 COMPUTER (RGB) 2 input/COMPUTER (RGB) 1 output 4 S-Video input 5 Audio input for Video/S-Video 6 Audio input for COMPUTER 1/2 7 Video input 8 Audio output

As of May 2007 < 5 > Standard setting-up positions L ø49 (1-15/16˝) ø43 (1-11/16˝) 93.5 (3-11/16˝) 70 (2-3/4˝) Projected image Upper edge of projected image Lower edge of projected image Projected image L L 328–408 (12-29/32˝–16-1/16˝) Adjustable in 20-mm (15/32-inch) step. 67.5 (2-21/32˝) 65 (2-9/16˝) E E unit : mm (inch) NOTE: Illustrations show the projector installed using optional ceiling bracket. This illustration is not drawn to scale. L: Distance to screen E: Height from the edge of screen to center of lens * This distance is especially recommend- ed for ceiling-mounted use and other permanent installations. NOTE: Values shown are approximate. The value for L (distance to screen) varies slightly depending on the zoom lens characteristics. When the shortest projection distance is used, a small amount of distortion may occur in the image due to the zoom lens characteristics. 0.84 m 1.02 m 1.27 m 1.52 m 1.78 m 2.03 m 2.29 m 2.54 m 3.05 m 3.81 m 5.08 m 6.35 m 7.62 m – 1.2 m 1.6 m 1.9 m 2.2 m 2.5 m 2.8 m 3.1 m 3.7 m 4.6 m 6.2 m 7.7 m 9.2 m 1.1 m 1.4 m 1.8 m 2.1 m 2.5 m 2.9 m 3.3 m 3.6 m 4.4 m 5.5 m 7.3 m 9.2 m 11.1 m 0.07 m 0.09 m 0.11 m 0.13 m 0.15 m 0.17 m 0.19 m 0.21 m 0.25 m 0.32 m 0.42 m 0.53 m 0.64 m 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0 – 33˝ 40˝ 50˝ 60˝ 70˝ 80˝ 90˝ 100˝ 120˝ 150˝ 200˝ 250˝ 300˝ – 4.0´ 5.0´ 6.0´ 7.0´ 8.0´ 9.0´ 10.0´ 12.0´ 15.1´ 20.1´ 25.1´ 30.2´ 3.9´ 4.7´ 5.9´ 7.2´ 8.4´ 9.6´ 10.8´ 12.0´ 14.5´ 18.1´ 24.2´ 30.3´ 36.4´ 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0 – 0.2´ 0.3´ 0.4´ 0.4´ 0.5´ 0.6´ 0.6´ 0.7´ 0.9´ 1.1´ 1.4´ 1.8´ 2.1´ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Projection size (diagonal) Height from the edge of screen to center of lens (H) Projection distance (L) Min (wide) Max (telephoto) Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance. Aspect ratio 4 : 3 minimum L (m) = (diagonal screen size in inches) x 0.0307 - 0.0310 maximum L (m) = (diagonal screen size in inches) x 0.0371 - 0.0290 Aspect ratio 16 : 9 minimum L (m) = (diagonal screen size in inches) x 0.0335 - 0.0315 maximum L (m) = (diagonal screen size in inches) x 0.0405 - 0.0365

720 x 576i 720 x 480i 720 x 576i 720 x 480 720 x 576 1,280 x 720 1,920 x 1,080i 640 x 400 640 x 480 800 x 600 832 x 624 1,024 x 768 1,280 x 768i 1,152 x 864 1,152 x 870 1,280 x 960 1,280 x 1,024 1,400 x 1,050 1,440 x 900 1,600 x 1,200 1,440 x 900 15.7 15.6 15.7 15.6 31.5 31.3 45.0 33.8 28.1 31.5 37.9 31.5 35.0 37.9 37.5 43.3 35.2 37.9 48.1 46.9 53.7 49.7 48.4 56.5 60.0 68.7 35.5 64.0 67.5 76.7 68.7 60.0 64.0 80.0 91.1 64.0 65.1 75.0 47.8 49.7 55.9 59.9 50.0 59.9 50.0 59.9 50.0 60.0 60.0 50.0 70.1 85.1 59.9 66.7 72.8 75.0 85.0 56.3 60.3 72.2 75.0 85.1 74.6 60.0 70.1 75.0 85.0 87.0 71.2 74.9 85.0 75.1 60.0 60.0 75.0 85.0 60.0 60.0 60.0 59.9 59.8 59.9 - - 13.5 13.5 27.0 27.0 74.3 74.3 74.3 25.2 31.5 25.2 30.2 31.5 31.5 36.0 36.0 40.0 50.0 49.5 56.3 57.3 65.0 75.0 78.8 94.5 44.9 94.2 108.0 121.5 100.0 108.0 108.0 135.0 157.5 108.0 122.4 162.0 79.5 83.5 106.5 A A A A A A A A A A A A A A A A A A A A A A AA AA AA AA AA B B B B B B B B B B B A A A NTSC/NTSC4.43/PAL-M/PAL60 PAL/PAL-N/SECAM 525i (480i) 625i (576i) 525p (480p) 625p (576p) 750 (720)/60p 1125 (1080)/60i 1125 (1080)/50i VGA400 VGA480 SVGA MAC16 XGA MXGA MAC21 MSXGA SXGA SXGA+ UXGA60 WXGA WXGA+ VIDEO/S-VIDEO COMPUTER/ COMPONENT COMPUTER S P E C F I L E PT-LB51NT Micro-Portable Wireless LCD Projector As of May 2007 < 6 > Computer data compatibility This projector accepts up to 91 kHz horizontal scanning frequency and 162 MHz dot clock. NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 100 MHz. The display resolution of this projector is 1,024 x 768 pixels. Input signals that exceed this resolution will be converted to 1,024 x 768 pixels. List of compatible signals 1. The “i” appearing after the resolution indicates an interlaced signal. 2. The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is projected. B Signals are compressed by the image processing circuit before picture is projected.

Serial adapter ET-ADSER Communication cable (RS-232C) S P E C F I L E PT-LB51NT Micro-Portable Wireless LCD Projector As of May 2007 < 7 > STX ETX C1 C2 C3 : P1 P2 P3 P4 Start (1 byte) End (1 byte) Colon (1 byte) Parameter (1-4 bytes) Command (3 bytes) (Control and/or query commands) Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, com- mands must be input through communication software, based on the format and satisfying the commu- nication conditions shown below. Pin assignments and signal names Communication conditions (factory setting) Basic format Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent in this order. Add parameters according to the details of control. CAUTIION When sending multiple commands, be sure to send the next command after receiving a response from the projector. CAUTIION Be sure to see that an optional serial adapter ET-ADSER and a RS-232C communication cable match the PC to be connected. 1 2 5 3 6 8 No. 1 2 3 4 No. 5 6 7 8 Signal name – – RXD GND Signal name TXD – – – Description Connected internally Connected internally Receive data Ground Description Send data Connected internally NC NC Signal level Synchronization method Baud rate Parity Character length Stop bit X parameter S parameter RS-232C-compliant Start-stop synchronization 9,600 bps None 8 bits 1 bit None None Cable specifications 1 2 3 4 5 6 7 8 9 – 2 3 – 5 6 7 8 – 5 3 – 4 6 1 2 – 1 2 3 4 5 6 7 8 9 PC (DTE) Projector Serial adapter (ET-ADSER) NC NC DSR NC NC NC NC NC Mini DIN 8-pin

As of May 2007 < 8 > Control commands * 1 Do not send PON, POF, or OSH commands continuously in a short period of time. Doing so may burst the lamp or shorten the lamp replacement cycle. * 2 When a command other than OSH is sent while the shutter function is operating, the projector will send an ER401 command in reply and release the shutter function. PON *1 POF *1 AVL: IIS: OST OFZ: OEN VPM: : : :> : AUU AUD OMN OCU OCD OCL OCR OAS OSH *1/*2 OIX DZU DZD Power on (standby mode on) Power off (standby mode off) Volume control Input signal selection The same function as “default” button Freeze Enter Picture mode Natural Standard Dynamic Blackboard Volume up Volume down Menu Cursor up Cursor down Cursor left Cursor right Auto setup Shutter Index window Digital zoom: Enlargement Digital zoom: Reduction PON POF AVL: IIS: OST OFZ: OEN VPM: : : : : AUU AUD OMN OCU OCD OCL OCR OAS OSH OIX DZU DZD – – 0 – – 0 – – – – – – – – – – – – – – – – – – – – 63 – – 1 – – – – – – – – – – – – – – – – – – Command: Function Callback: Parameter value Min Max Status asking commands Command Description Callback QPW Q$S QIN QAV QVC QVT QVB QVR QVS QWR QWG QWB QHP QVP QCP QDC QSP QLG QPM QFZ Q$L QSH QKS QTE Standby power status Lamp status Input signal status Volume adjustment value Color adjustment value Tint adjustent value Brightness adjustment value Contrast adjustment value Sharpness adjustment value White balance: R adjustment value White balance: G adjustment value White balance: B adjustment value Horizontal position adjustment value Vertical position adjustment value Clock phase adjustment value Dot clock adjustment value Installation setting status On-screen menu language Picture mode status Freeze status Lamp run time Shutter function status Keystone correction status Color temperature adjustment status Natural Standard Dynamic Blackboard

As of May 2007 < 9 > Parameter format Parameter format Size (Byte) Difinition 3 (1 or 2 bytes also possible when under control) 1 3 1 3 3 1 4 1 1 Dicimal without signs: 0-999 (000, 001, 002...999) Dicimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99) Callback from the projector is 3 Byte. 0 = off, 1 = on RG1 = computer 1, RG2 = computer 2, NWP = network, VID = video, SVD = S-Video 0 = front, 1 = rear, 2 = ceiling and front, 3 = ceiling and rear ENG = English, DEU = German, FRA = French, ESP = Spanish, ITL = Italian, JPN = Japanese, CHI = Chinese, POR = Portuguese, SVE = Swedish, NOR = Norwegian, DAN = Danish, POL = Polish, CES = Czech, MAG = Hungarian, RUS = Russian, THA = Thai, KOR = Korean 000 = power on (standby mode on), 001 = power off (standby mode off) 0 = standby, 1 = lamp on under control, 2 = lamp off, 3 = lamp off under control Dicimal without signs: 0000-9999 hours 0 = economy, 1 = normal 0 = low, 1 = standard, 2 = high Command example To set the volume to +30, send the command as shown below. STX AVL : 30 ETX Start Command Parameter End NOTE: If a wrong command is received, the projector will send an ER401 command to the computer. NOTE: When sending commands without parameters, a colon (:) is not necessary.

As of May 2007 < 10 > Notes on Projector Placement and Operation: The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is an unobstructed space of 150 mm (5-29/32˝) or more around the projector’s exhaust openings. 3. If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the projector is between 0°C/32°F and 35°C/95°F. Also make sure the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings. Direction of Air Intake and Exhaust 150 mm (5-29/32˝) or more 150 mm (5-29/32˝) or more 150 mm (5-29/32˝) or more Operating the Projector Continuously 1. If the projector is to be operated continuously 10 hours or more, lamp replacement cycle duration becomes shorter. 2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods. Weights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject to export control regulations. UHM is a trademark of Matsushita Electric Industrial Co., Ltd. Intel and Pentium are registered trademarks of Intel Corporation. Microsoft, Windows Vista and Windows are either registered trademarks or trademarks of Microsoft Corp. in the United States and/or other countries. Apple, Mac, Mac OS, Macintosh and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. All other trademarks are the property of their respective trademark owners. Projection images simulated. Intake Exhaust