Samsung SPC-6000 Quick Setup Manual

Download Samsung SPC-6000 PDF Manual (6 pages)

Text of the manual

Technical Support in HQ

Importance Importance Low Issue No. Issue No. CS-110309 Date of Issue Date of Issue 9th Mar. 2011 Related Models Related Models SPC-6000, SRD Series Type Type Information Subject Subject SPC-6000 Quick Setup Guide Contents Contents SPC-6000 SPC 6000 Quick Set-up Guide ■Summary The SPC-6000 Quick set-up guide describes how to connect to both an SPD speed dome and Samsung Digital Video Recorder for both basic and multiple operations. The equipment used in this example includes: • SPC-6000(FW v1.00_100913) • SRD-1670DC(FW v1.02_110118164134) Website : www.samsungcctv.com SCSS : www.scss.net e-mail : [email protected] Tel : +82-70-7147-8888 • SPD-3750T(Dome v1.28)

(1) Hardware Connections

Website : www.samsungcctv.com SCSS : www.scss.net e-mail : [email protected] Tel : +82-70-7147-8888

b. Menu Set

Caution : Both of SPC-6000 and SCC-3100A cannot be used as Master, Slave in one system. 2 keyboards are not compatible, if SVR and SRD series are used in one system, the system keyboard should be separately used as recommended below keyboard should be separately used as recommended below. - SVR Series : SCC-3100A - SRD Series : SPC-6000 Website : www.samsungcctv.com SCSS : www.scss.net e-mail : [email protected] Tel : +82-70-7147-8888

a. hardware connection

First, let’s take a look at the system with coax camera installed. In order to control the ifi f h ifi S d h l d d i S specific camera of the specific SRD connected, what you only need to do is to connect SRD. If succeed, keyboard will send packets to control SRD and SRD will control PTZ cameras. For example, if you would like to control Camera which is connected to channel 1 of SRD, Connect SRD first by pushing [DVR] + [1] + [Enter] and choose channel 1. Also, if you would like to control Camera connected to channel 2 of SRD 2, Connect SRD by pushing [DVR] + [2] + [Enter] + [2] + [CAM] in sequence. Website : www.samsungcctv.com SCSS : www.scss.net e-mail : [email protected] Tel : +82-70-7147-8888

In case of system using RS-485 data cable, TX port on rear side of SRD will connect both of

keyboard data +/- and camera data +/-. It looks like the SRD uses ‘Serial control’ (Keyboard controls SRD, and SRD controls Camera that I call it ‘Serial control’) but SRD will just bypass the data from the keyboard and pass it to the camera directly.(I call it ‘Parallel control’) In short, SRD ith PTZ S i l t l f th k b d - SRD with coax PTZ : Serial control from the keyboard - SRD with RS-485 PTZ : Parallel control from the keyboard (SRD bypass data & Keyboard controls PTZ directly) Therefore, Please assign ID of PTZs & SRDs with all different numbers to prevent communication error of the data between the keyboard and devices. Also please don’t forget to set termination as ‘ON’ for far position of camera from the DVR. b. menu set Website : www.samsungcctv.com SCSS : www.scss.net e-mail : [email protected] Tel : +82-70-7147-8888