Teletek electronics ECLIPSE WL Installation And Programming Manual
Text of the manual
English Wireless Expander Module
Installation and Programming Manual
Български Безжичен разширителен модул
Ръководство за инсталиране и
програмиране
Eclipse WL – Installation and Programming Manual
2
English
Table of contents
1. General Information .......................................................................................... 3
2. Eclipse WL Components ................................................................................... 4
3. Basic steps for adding Eclipse WL to the system con
Eclipse WL – Installation and Programming Manual
3
1. General Information
Eclipse WL is a wireless expander module designed for building of hybrid systems with
wired control panels Eclipse series and wireless devices BRAVO series.
Eclipse WL is mounted in a small plastic box and it is necessary to be connected to the
system BUS of the control panel. For de
Eclipse WL – Installation and Programming Manual
4
2. Eclipse WL Components
Figure 2. Eclipse WL mounted into small plastic box.
1. Terminal row:
• Tamper – Connect the wires of the tamper-switch in the box.
• RED, GRN, YEL, BLK – Serial interface for connection to Eclipse 16/32/99 control
panels.
2. LED indication of the module status (Status LED)
Eclipse WL – Installation and Programming Manual
5
3. Basic steps for adding Eclipse WL to the system configuration
To add Eclipse WL wireless expander to the system configuration, do in sequence:
• Connect Eclipse WL to the system bus as observe the polarity.
• Add Eclipse WL to a free address of the system configuration.
• Enroll the wireless devic
