Samsung ST100 Quick Start Manual

8T100 FOR TECHNICAL SUPPORT, PLEASE CALL 1-BOO-SAMSUNG (726-7864) POR FAVOR LLAMAR 1-800-SAMSUNG (726-7864) PARA ASISTENCIA TECNICA

Camera layout 4 Setting up your camera 5 Unpacking 5 Inserting the battery and memory card 6 Charging the battery 6 Turning on your camera 7 Using the touch screen 7 Capturing photos or videos 8 Selecting a shooting mode using motion recognition...... 9 Playing files 9 Transferring files to a PC (Windows) 10 Specifications 11 EN-2• 1 15 14 25 23 68 89 113 Health and safety information ~ a.- Do not use your camera near flammable or explosive gases and liquids Do not use your camera near fuels, combustibles, or flammable chemicals. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the camera or its accessories. Keep your camera away from small children and pets Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well. Prevent damage to subjects' eyesight Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals. Using the flash too close to your subject's eyes can cause temporary or permanent damage.

care • Use only Samsung-approved batteries and chargers. Incompatible batteries and chargers can cause serious injuries or damage to your camera. • Never place batteries or cameras on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated. Handle and store your camera carefully and sensibly • Do not allow your camera to get wet-liquids can cause serious damage. Do not handle your camera with wet hands. Water damage to your camera can void your manufacturer's warranty. • Avoid using or storing your camera in dusty, dirty, humid, or poorly-ventilated areas to prevent damage to moving parts and internal components. • Exercise caution when connecting cables or adapters and installing batteries and memory cards. Forcing the connectors, improperly connecting cables, or improperly installing batteries and memory cards can damage ports, connectors, and accessories. • Do not insert foreign objects into any of your camera's compartments, slots, or access points. This type of damage may not be covered by your warranty. Protect batteries, chargers, and memory cards from damage • Avoid exposing batteries or memory cards to very cold or very hot temperatures (below 0° C/32° For above 40° C/1 04° F). Extreme temperatures can reduce the charging capacity of your batteries and can cause memory cards to malfunction. • Prevent memory cards from making contact with liquids, dirt, or foreign substances. If dirty, wipe the memory card clean with a soft cloth before inserting in your camera. EN-3• I m ;::, (,Q-_. tJ)=r

. ..................................•. . . o Speaker .... " . e Lens ......................... • AF-assist light/timer lamp ................................................................................................. • Front display .................................. ,_ .....-. • Flash ........................................................................... CD Microphone EN-4 • G> Status lamp ........... -,,,... .. " . m Zoom button ..... .. .. . .........•... .....••..•.. ....••.........•.•... ................•..... 48 Playback button ........................................... . . 48 Battery chamber cover . .... .. . .....•........ 4D Main display (Referred to ITouch screen" in this manual) ............... . CD USB, AN, and HoMI port (Accepts USB cable, AN cable, or HoMI adapter) . , .. o Tripod mount

Unpacking I '. m :;) (Q--- en=r Camera Cleaner (0107-001061) AC adapter/USB cable (AD44-00143A)/(AD39-00172A) User Manual CD-ROM (AD46-00352A) Rechargeable battery (AD43-00194A) Quick Start Manual (AD68-05416A) Strap (Silver: AD63-02596A! Black: AD63-02604A) Optional accessories Sold as a set Camera case Memory card (microSo™) AN cable (AD39-00163A) Battery charger HoMI cable/HoMI adapter/ (AD44-00164A) Remote control (AD39-00160A)/(AD59-00171 A)/ (AD98-06353A) EN-5•

Inserting the battery and memory card .. Charging the battery Indicator light • Red: Charging • Green: Fully charged Before using the camera for the first time, you must charge the battery. 1 Insert the battery with the Samsung logo facing down. ... Removing the memory card Push gently the card until the card disengages from the camera, and then pull it out of the slot. EN-6• 2 Insert the memory card with the gold- colored contacts facing up. ... Removing the battery

Press [POWER]. • The initial setup screen appears when you turn on your camera for the first time. -- ---- ...,.

Taking a photo Recording a video 4 Press [Shutter] all the way down to take the photo. 1 Make sure that the camera is in the Q mode (Auto mode). 2 Align your subject in the frame. 3 Press [Shutter] halfway down to focus automatically. • A green frame means the subject in focus. Resolution Super fine Fine Normal Number of photos by resolution (for 1 GB microSDTM) 1 Select Q ~ II. 2 Align your subject in the frame. 3 Press [Shutter]. • To pause, select II. • To resume, select.0 4 Press [Shutter] again to stop recording. am- ~~....~~?9..~~?~9. .. 1 ~???~q.......... }5.~ . ~ • 4320 X 2880. 137 267 391 . .......................• ..........•••.. . 12. . 4000 X 3000: 142 278. 409 ............ . - . . . ~ ! ~~?Q..~..?~.~.? i 1.?.~ ~.?Q : ~!..~ . B. 3264 X 2448! 211 409 594 ............ . . 5. ! 2560 X 1920 335 637 908 ................... : ; . .~~?q~~~~~~?.i... 51 0~.~f3. qq.......1.J~~.~. /]!] • 1920 X 1080! 762 . 1,373 . 1,931 .................................................... . . I. 1024 X 768 1,626 2,575 3,090 I" ~ [I;) II F3.6 1/455 ~ ~ ~ ~ These figures are measured under Samsung's standard conditions and may vary depending on shooting conditions and camera settings. EN-8•

using motion recognition In Shooting mode, tilt the camera while touching and holding l,t. Access the Movie mode Access the Program mode Access the Smart Auto mode <£mB Motion recognition may not work well if you hold the camera parallel to the ground. Playing files Viewing photos 1 Press [Playback]. 2 Drag files left or right to scroll through files. • You can also view files by tilting your camera. • You can select and hold > •Adjust volume or mute sound. EN-9• I m ::s co--- en::::r

. .. • SAfr4_00)4, '),.'j..< .~Jxns.Jl'G .S,AfolUXl24.W",V mSN"lJXlZ6.FG 111l1li 1 Connect the camera to the PC with the USB cable. ~ Make sure that the PC Software option is set to On in the settings menu. 2 Turn on the camera. • The computer recognizes the camera automatically. • For Windows Vista and Windows 7, select Run iStudio.exe from the AutoPlay window. 3 Select a folder on your computer to save new files. • If your camera has no new files, the pop-up window for saving new files will not appear. EN-10• 4 Select Yes. • New files will be transferred to your computer. You can now use the Intelli-studio program. r. • • • "." I: n , ~ About Intelli-studio Intelli-studio is a built-in program that allows you to play back and edit files. You can upload files to websites, such as Flickr or YouTube. Also, you can download short animations for use in Children mode.

• Effective pixels: approx. 14.2 mega-pixels • Total pixels: approx. 14.48 mega-pixels . . . ...............................• • Focal length: Schneider-KREUZNACH lens f = 6.3 - 31.5 mm (35 mm film equivalent: 35 - 175 mm) • F-stop range: F3.6 0fV) - F4.8 (T) ............................................................................- - ,. . • Main Display: 3.5" (8.9 em) Wide 1,152 KlFull Touch Screen Panel • Front Display: 1.8" (4.6 em) 116 KI TFT LCD .... -............................................................................••.•••••••........ TIL auto focus (Multi AF, Center AF, Smart Face Recognition AF, Face Detection AF, Smart Touch AF, One Touch Shooting) • Auto: 118 - 1/2,000 sec. • Program: 1 - 1/2,000 sec. • Night: 8 - 1/2,000 sec. • Fireworks: 2 sec. I m :::J (Q--- fA =t' ....................................................................................., . Storage DC power input connector Rechargeable battery Dimensions 0N x H x D) Weight Operating temperature Operating humidity • Internal memory: approx. 30 MB • External memory (Optional): microSDTM card (up to 2 GB guaranteed), microSDHCTM card (up to 8 GB guaranteed) Intemal memory capacity may not match these specifications. 34 pin Lithium-ion battery (BP-70A, 740 mAh) 100 x 60 x 20 mm 135 g (without battery and memory card) ..................•..•.•................•••• 0- 40° C 5 - 85% EN-11 I

or visit our website http://www.samsungimaging.com/or http://www.samsung.com/for after-sales service or inquiries.

instructions for your camera. Please read this manual thoroughly.  Click a topic Common questions Quick reference Contents Basic functions Extended functions Shooting options Playback/Editing Settings Appendixes Index User Manual ST100

Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Warning—situations that could cause injury to yourself or others Caution—situations that could cause damage to your camera or other equipment Note—notes, usage tips, or additional information Safety warnings Do not use your camera near flammable or explosive gases and liquids Do not use your camera near fuels, combustibles, or flammable chemicals. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the camera or its accessories. Keep your camera away from small children and pets Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well. Prevent damage to subjects’ eyesight Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals. Using the flash too close to your subject’s eyes can cause temporary or permanent damage. Handle and dispose of batteries and chargers with care Use only Samsung-approved batteries and chargers. • Incompatible batteries and chargers can cause serious injuries or damage to your camera. Never dispose of batteries in a fire. Follow all local regulations • when disposing of used batteries. Never place batteries or cameras on or in heating devices, • such as microwave ovens, stoves, or radiators. Batteries may explode when overheated. Do not use a damaged power supply cord, plug, or loose • outlet when charging batteries. This may cause a fire or electric shock.

Exercise caution when connecting cables or adapters and • installing batteries and memory cards. Forcing the connectors, improperly connecting cables, or improperly installing batteries and memory cards can damage ports, connectors, and accessories. Do not insert foreign objects into any of your camera’s • compartments, slots, or access points. Damage due to improper use may not be covered by your warranty. Do not swing your camera by the strap. This may cause injury • to yourself or others. Do not paint your camera, as paint can clog moving parts and • prevent proper operation. Paint or metal on the outside of the camera may cause • allergies, itchy skin, eczema, or swelling for people with sensitive skin. If you have experience any of these symptoms, stop using the camera immediately and consult a doctor. Safety precautions Handle and store your camera carefully and sensibly Do not allow your camera to get wet—liquids can cause serious • damage. Do not handle your camera with wet hands. Water damage to your camera can void your manufacturer’s warranty. Do not expose the camera to direct sunlight or high • temperatures for an extended period of time. Prolonged exposure to sunlight or extreme temperatures can cause permanent damage to your camera’s internal components. Avoid using or storing your camera in dusty, dirty, humid, or • poorly-ventilated areas to prevent damage to moving parts and internal components. Remove the batteries from your camera when storing it for an • extended period of time. Installed batteries may leak or corrode over time and cause serious damage to your camera. Protect your camera from sand and dirt when using it on • beaches or in other similar areas. Protect your camera and the display from impact, rough • handling, and excessive vibration to avoid serious damage.

Do not use memory cards that have been formatted by other • cameras or by a computer. Reformat the memory card with your camera. Never use a damaged charger, battery, or memory card. • When carrying a memory card, use a case to protect the card • from electrostatic. Transfer important data to other media, such as a hard disk or • CD/DVD. When using the camera for an extended period, the memory • card may become warm; this is normal and not a malfunction. When the lifespan of a memory card has expired, you cannot • store any more photos on the card. Use a new memory card. Do not remove the memory card or turn off your camera while • the lamp as blinking, as this may damage your data. Use only Samsung-approved accessories Using incompatible accessories may damage your camera, cause injury, or void your warranty. Protect your camera’s lens Do not expose the lens to direct sunlight, as this may discolor • the image sensor or cause it to malfunction. Protect your lens from fingerprints and scratches. Clean your • lens with a soft, clean, debris-free lens cloth. Protect batteries, chargers, and memory cards from damage Avoid exposing batteries or memory cards to very cold or very • hot temperatures (below 0º C/32º F or above 40º C/104º F). Extreme temperatures can reduce the charging capacity of your batteries and can cause memory cards to malfunction. Prevent batteries from making contact with metal objects, as • this can create a connection between the + and – terminals of your battery and lead to temporary or permanent battery damage. Also, this may cause a fire or electric shock. Prevent memory cards from making contact with liquids, dirt, or • foreign substances. If dirty, wipe the memory card clean with a soft cloth before inserting in your camera. Do not allow liquids, dirt, or foreign substances to come in • contact with the memory card slot. Doing so may cause the camera to malfunction. Insert a memory card in the correct direction. Inserting a • memory card in the wrong direction may damage your camera and memory card. Turn off the camera when inserting or removing the memory • card. Do not bend, drop, or subject memory cards to heavy impact • or pressure.

Allow only qualified personnel to service your camera Do not allow unqualified personnel to service the camera or attempt to service the camera yourself. Any damage that results from unqualified service is not covered by your warranty. Ensure maximum battery and charger life Overcharging batteries may shorten battery life. After charging is • finished, disconnect the cable from your camera. Over time, unused batteries will discharge and must be • recharged before use. Disconnect chargers from power sources when not in use. • Use batteries only for their intended purpose. • Exercise caution when using the camera in humid environments When transferring the camera from a cold environment to a warm and humid one, condensation can form on the delicate electronic circuitry and memory card. In this situation, wait for at least 1 hour until all moisture has evaporated before using the camera. Check that the camera is operating properly before use The manufacturer takes no responsibility for any loss of files or damage that may result from camera malfunction or improper use. Health and safety information

• registered trademarks of the Microsoft Corporation. Mac is a registered trademark of the Apple Corporation. • HDMI, the HDMI logo and the term “High Definition • Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing LLC. Camera specifications or contents of this manual may • be changed without prior notice due to upgrades of camera functions. We recommend using your camera within a country • where you purchase it. For Open Source License information, refer to the • “OpenSourceInfo.pdf” in the provided CD-ROM. Organization of the user manual Basic functions 13 Learn about your camera’s layout, icons, and basic functions for shooting. Extended functions 31 Learn how to take a photo by selecting a mode and how to record a video or voice memo. Shooting options 45 Learn about the options you can set in Shooting mode. Playback/Editing 68 Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your computer, photo printer, TV, or HDTV. Settings 97 Refer to options to configure your camera’s settings. Appendixes 103 Refer to error messages, specifications, and maintenance tips.

Shooting mode Indication Smart Auto S Auto a Program p Scene s DUAL IS d Smart Scene Detection D Movie v Shooting mode icons These icons indicate that a function is available in the corresponding modes. The s mode may not support functions for all scenes. For example: Available in Program, DUAL IS, and Movie modes Icons used in this manual Icon Function Additional information Safety warnings and precautions [ ] Camera buttons. For example, [Shutter] represents the shutter button. ( ) Page number of related information “ The order of options or menus you must select to perform a step; for example: Select > “ (represents Select >, and then ) * Annotation Abbreviations used in this manual Abbreviation Definition ACB Auto Contrast Balance AEB Auto Exposure Bracket AF Auto Focus DIS Digital Image Stabilization DPOF Digital Print Order Format EV Exposure Value OIS Optical Image Stabilization WB White Balance

Half-press [ • Shutter]: press the shutter halfway down Press [ • Shutter]: press the shutter all the way down Half-press [Shutter] Press [Shutter] Subject, background, and composition Subject • : the main object of a scene, such as a person, animal, or still life Background • : the objects around the subject Composition • : the combination of a subject and background Subject Background Composition Expressions used in this manual Exposure (Brightness) The amount of light that enters your camera determines the exposure. You can alter the exposure with shutter speed, aperture value, and ISO speed. By altering the exposure, your photos will be darker or lighter. Normal exposure Overexposure (too bright)

The subject's eyes appear red. This is caused by a reflection from the camera flash. Set the flash option to • Red-eye or Red-eye Fix. (p. 50) If the photo has already been taken, select • Red-eye Fix in the edit menu. (p. 85) Photos have dust spots. Dust particles floating in the air may be captured in photos when you use the flash. Turn off the flash or avoid taking photos in a dusty place. • Set ISO speed options. (p. • 51) Photos are blurred. This may be caused by taking photos in low light conditions or holding the camera incorrectly. Press [ • Shutter] halfway down to make sure the subject is focused. (p. 29) Use the • d mode. (p. 36) Photos are blurred when shooting at night. As the camera tries to let in more light, the shutter speed slows. This can make it difficult to steady the camera and may result in camera shake. Select • Night in s mode. (p. 33) Turn on the flash. (p. • 50) Set ISO speed options. (p. • 51) Use a tripod to prevent your camera from shaking. • Subjects come out too dark because of backlighting. When the light source is behind the subject or when there is a high contrast between the light and dark areas, the subject may come out too dark. Avoid shooting in front of the sun. • Select • Backlight in s mode. (p. 33) Set the flash option to • Fill in. (p. 50) Adjust the exposure. (p. • 59) Set the Auto Contrast Balance ( • ACB) option. (p. 60) Set the metering option to • Spot if a bright subject is in the center of the frame. (p. 61)

s • mode > Beauty Shot, Portrait, Children  33 Red-eye • , Red-eye Fix (to prevent or correct red-eye)  50 Face Detection •  55 Taking photos at night or in the dark s • mode > Night, Dawn, Fireworks  33 Flash options •  50 ISO speed (to adjust the sensitivity to light) •  51 Taking action photos Continuous • , Motion Capture  64 Taking photos of text, insects, or flowers s • mode > Close Up, Text  33 Macro • , Auto Macro (to take close-up photos)  52 White Balance • (to change the color tone)  62 Adjusting the exposure (brightness) ISO speed (to adjust the sensitivity to light) •  51 EV (to adjust exposure) •  59 ACB (to compensate for subjects against bright • backgrounds)  60 Metering •  61 AEB (to take 3 photos of the same scene with different • exposures)  64 Applying a different effect Photo styles (to apply tones) •  65 Smart filter effects •  66 Image adjustment (to adjust saturation, sharpness, or • contrast)  67 Reducing camera shake Optical Image Stabilization (OIS) •  28 d • mode  36 Viewing files by category in • Smart Album  73 Deleting all files on the • memory card  75 Viewing files as a slide show •  77 Viewing files on a TV or HDTV •  87 Connecting your camera to a • computer  89 Adjusting sound and volume •  99 Adjusting the brightness of • the display  99 Formatting the memory card •  100 Changing the display • language  100 Setting the date and time •  100 Troubleshooting •  110

Shooting modes ................................................................ 32 Using the Smart Auto mode ................................................. 32 Using the Scene mode ........................................................ 33 Using the Beauty Shot mode ................................................ 34 Using the frame guide .......................................................... 35 Using the DUAL IS mode ..................................................... 36 Using the Program mode ..................................................... 37 Recording a video ............................................................... 37 Using the Smart Scene Detection mode ................................ 39 Taking photos with the front display .................................. 40 Using the Self-portrait mode ................................................. 40 Using the Children mode ..................................................... 41 Using the Couple mode ....................................................... 41 Using the jump shot timer .................................................... 42 Using the function information ............................................... 43 Using the smile icon ............................................................ 43 Recording a video with the front display ................................. 43 Recording voice memos ................................................... 44 Recording a voice memo ..................................................... 44 Adding a voice memo to a photo .......................................... 44 Basic functions ............................................................... 13 Unpacking ......................................................................... 14 Camera layout ................................................................... 15 Inserting the battery and memory card .............................. 17 Charging the battery and turning your camera on ............. 18 Charging the battery ............................................................ 18 Turning on your camera ........................................................ 18 Performing the initial setup ................................................ 19 Learning icons ................................................................... 20 Using the touch screen ..................................................... 21 Selecting a shooting mode ................................................ 22 Selecting a shooting mode using motion recognition .............. 23 Setting the touch screen and sound ................................. 24 Setting the display type for the touch screen .......................... 24 Setting the sound ................................................................ 24 Taking photos .................................................................... 25 Turning on the front display ................................................... 26 Zooming ............................................................................. 27 Reducing camera shake (OIS) .............................................. 28 Tips for getting a clearer photo .......................................... 29

Selecting a resolution and quality ...................................... 46 Selecting a resolution ........................................................... 46 Selecting image quality ........................................................ 47 Using the timer .................................................................. 48 Shooting in the dark .......................................................... 50 Preventing red-eye .............................................................. 50 Using the flash .................................................................... 50 Adjusting the ISO speed ...................................................... 51 Changing the camera’s focus ............................................ 52 Using macro ....................................................................... 52 Using auto focus ................................................................. 52 Using smart touch focus ...................................................... 53 Using one touch shooting .................................................... 54 Adjusting the focus area ....................................................... 54 Using face detection ......................................................... 55 Detecting faces ................................................................... 55 Taking a smile shot .............................................................. 56 Detecting eye blinking .......................................................... 56 Using smart face recognition ................................................ 57 Registering faces as your favorites (My Star) .......................... 57 Adjusting brightness and color .......................................... 59 Adjusting the exposure manually (EV) .................................... 59 Compensating for backlighting (ACB) .................................... 60 Changing the metering option ............................................... 61 Selecting a light source (White balance) ................................. 62 Using burst modes ............................................................ 64 Improving your photos ...................................................... 65 Applying photo styles ........................................................... 65 Applying smart filter effects ................................................... 66 Adjusting your photos .......................................................... 67 Playback/Editing ............................................................. 68 Playing back ...................................................................... 69 Starting Playback mode ....................................................... 69 Viewing photos ................................................................... 76 Playing a video .................................................................... 78 Playing a voice memo .......................................................... 79 Editing a photo .................................................................. 81 Rotating a photo .................................................................. 81 Resizing photos .................................................................. 81 Applying photo styles ........................................................... 82 Applying smart filter effects ................................................... 83 Applying a special effect ...................................................... 84 Correcting exposure problems ............................................. 84 Creating a print order (DPOF) ................................................ 85 Viewing files on a TV or HDTV ........................................... 87 Transferring files to your computer (for Windows) .............. 89 Transferring files using Intelli-studio ........................................ 90 Transferring files by connecting the camera as a removable disk .................................................................................... 92 Disconnecting the camera (for Windows XP) .......................... 93 Transferring files to your computer (for Mac) ...................... 94 Printing photos with a photo printer (PictBridge) ............... 95

Settings menu ................................................................... 98 Accessing the settings menu ................................................ 98 Sound ................................................................................ 99 Display ............................................................................... 99 Settings ............................................................................ 100 Appendixes ................................................................... 103 Error messages ............................................................... 104 Camera maintenance ...................................................... 105 Cleaning your camera ........................................................ 105 About memory cards ......................................................... 106 About the battery ............................................................... 107 Before contacting a service center .................................. 110 Camera specifications ..................................................... 113 FCC notice ...................................................................... 117 Index ............................................................................... 118

Camera layout ……………………………… 15 Inserting the battery and memory card … 17 Charging the battery and turning your camera on …………………………………… 18 Charging the battery ………………………… 18 Turning on your camera ……………………… 18 Performing the initial setup ……………… 19 Learning icons ……………………………… 20 Using the touch screen …………………… 21 Selecting a shooting mode ……………… 22 Selecting a shooting mode using motion recognition …………………………………… 23 Setting the touch screen and sound …… 24 Setting the display type for the touch screen 24 Setting the sound …………………………… 24 Taking photos ……………………………… 25 Turning on the front display ………………… 26 Zooming ……………………………………… 27 Reducing camera shake (OIS) ……………… 28 Tips for getting a clearer photo …………… 29 Basic functions Learn about your camera’s layout, icons, and basic functions for shooting.

Unpacking Check your product box for the following items. Camera AC adapter/USB cable Rechargeable battery Strap Cleaner User Manual CD-ROM Quick Start Manual Optional accessories Sold as a set Camera case Memory card (microSDTM) A/V cable Battery charger HDMI cable/HDMI adapter/ Remote control The illustrations may differ from your actual items.

Camera layout Before you start, familiarize yourself with your camera's parts and their functions. Speaker Shutter button POWER button Lens Microphone Front LCD button AF-assist light/timer lamp Flash Front display Battery chamber cover Insert a memory card and battery Tripod mount USB, A/V, and HDMI port Accepts USB cable, A/V cable, or HDMI adapter

Camera layout Status lamp Blinking • : When saving a photo or video, being read by a computer or printer, or out of focus Steady • : When connecting to a computer or in focus Zoom button Zoom in or out • Zoom in on part of a photo or view files • as thumbnails Playback button Main display* * Referred to “Touch screen” in this manual. 1 2

Inserting the battery and memory card Learn how to insert the battery and an optional memory card into the camera. Removing the battery and memory card Push gently the card until the card disengages from the camera, and then pull it out of the slot. Push the lock up to release the battery. The internal memory can be used as a temporary storage device when the memory card is not inserted. Memory card Battery Battery lock Insert a memory card with the gold-colored contacts facing up. Insert the battery with the Samsung logo facing down. Memory card Battery

Charging the battery and turning your camera on Turning on your camera Press [POWER] to turn your camera on or off. The initial setup screen appears when you turn on the camera • for the first time. (p. 19) Turning on your camera in Playback mode Press [Playback]. The camera turns on and accesses Playback mode immediately. When you turn on your camera by pressing and holding [Playback] for about 5 seconds, the camera does not emit any camera sounds. Charging the battery Before using the camera for the first time, you must charge the battery. Attach the USB cable to the AC adapter, and then plug the end of cable with the indicator light into your camera. Indicator light Red • : Charging Green • : Fully charged

Performing the initial setup When the initial setup screen appears, follow the steps below to configure the camera’s basic settings. Select 5 Date/Time Set. Set the date and time, and select 6 . Date/Time Set Select 7 Date Type and a date format. YYYY/MM/DD MM/DD/YYYY DD/MM/YYYY Off Language Time Zone Date/Time Set Date Type Select 8 to switch to the Shooting mode. Select 1 Language. Select a language. 2 Select 3 Time Zone. Select a time zone and select 4 . To set the daylight-saving time, select t
. Time Zone London

Icon Description Display type Touch screen lock l • : Motion recognition M • : Shooting options and settings menu f Image setting options • : Exposure value • : White balance • : ISO speed • : Face tone • : Face retouch • : Focus area option • : Face detection option • : Photo resolution • : Video resolution • : Photo quality • : Frame rate • : Exposure with ACB • : Metering option • : Burst type • : Photo styles • : Smart filter effect • : Image adjustment (sharpness, contrast, saturation) • : Optical Image Stabilization (OIS) • : Audio recording <> • : Another row of options Learning icons The icons displayed will change according to the mode you select or the options you set. 1 Status icons Icon Description p Shooting mode Aperture and shutter speed Photo resolution Video resolution Metering Optical Image Stabilization (OIS) Frame rate Exposure value ISO speed White balance Face detection Burst mode Image adjustment (sharpness, contrast, saturation) Icon Description Photo styles Smart filter effect Available number of photos Available recording time Internal memory Memory card inserted • : Fully charged • : Partially charged • (Red) : Charging needed 5.0 Zoom ratio Voice memo Auto focus frame Camera shake Option set 1 (of 3) Current date and time Grid lines 2 Option icons (touch) Icon Description Flash option Auto focus option Timer option 5.0 1 2

Using the touch screen Learn basic actions to use the touch screen. The touch screen works best when touched with the soft part of your finger. Touching Touch an icon to select a menu or option. Dragging Drag left or right to scroll horizontally. -2 -1 0 +2 -2 -1 0 +2 +1 EV Do not use other sharp objects, such as pens or pencils, to touch the screen. Doing so may damage the screen. When you touch or drag on the screen, discolorations may occur. It • is not a malfunction but a characteristic of the touch screen. Touch or drag lightly to reduce these effects. The touch screen may not recognize your touches correctly when: • You touch multiple items at the same time. - You use the camera in high humidity environments. - You use the camera with an LCD protection film or another LCD - accessory. If you perform no operations for few seconds, the screen will dim to • save battery life. Depending on the viewing angle, the screen may appear darker. • Adjust the brightness or angle.

Selecting a shooting mode Learn how to select a shooting mode. Your camera provides you with various modes for shooting. Mode Description S Smart Auto: Take a photo by letting the camera select a scene mode as it detects. (p. 32) a Auto: Take a photo quickly and easily with minimal settings. (p. 25) p Program: Take a photo by setting options. (p. 37) s Scene: Take a photo with options preset for a specific scene. (p. 33) d DUAL IS: Take a photo with options suitable for reducing camera shake. (p. 36) D Smart Scene Detection: Record a video by letting the camera select a scene mode as it detects. (p. 39) v Movie: Record a video. (p. 37) Select the mode icon. 1 Select a mode. 2

Selecting a shooting mode Access the Smart Auto mode (p. 32) Motion recognition may not work well if you hold the camera parallel to the ground, as shown below. Selecting a shooting mode using motion recognition Your camera features a built-in motion sensor that allows you to quickly switch the shooting mode by tilting the camera. In Shooting mode, tilt the camera while touching and holding . Access the Movie mode (p. 37) Access the Program mode (p. 37)

Setting the touch screen and sound Learn how to change the basic settings for the touch screen and sound according to your preferences. Option Description Guide Line: Display grid lines. The grid lines are helpful for getting the photo aligned with a surface, such as the horizon or the edges of buildings. This option is available only in Shooting mode. Setting the sound Set whether your camera emits a specified sound when you operate your camera. In Shooting or Playback mode, select 1 M. Select 2 “ Beep Sound. Select an option. 3 Option Description Off The camera will not emit any sounds. On The camera emits sounds. Select 4 to return to the previous mode. Setting the display type for the touch screen In Shooting mode, select 1 . (In Playback mode, select .) Select an option. 2 Full Option Description Touch Lock: The touch screen is locked during shooting (touch until reaches to unlock the touch screen). Full: In Shooting mode, always display icons on the screen. In playback mode, display icons and information. Basic: In playback mode, always display icons on the screen. Hide: Hide icons on the screen if you perform no operations for 3 seconds (touch the screen to display icons again).

Taking photos Learn basic actions to take photos easily and quickly in Auto mode. Make sure that the camera is in 1 a mode (Auto), the camera’s default shooting mode. If not, select the mode icon t
“a. Align your subject in the frame. 2 Half-press [ 3 Shutter] to focus. A green frame means the subject in focus. t
Press [ 4 Shutter] to take a photo. See page 29 for tips to get clearer photos.

Taking photos Turning on the front display The front display will help you take self-portraits or photos of children, couples, or people jumping. If you use the children mode, you can play a short animation on the front display to attract a child’s attention. (p. 41) Press the front LCD button to turn on the front display. 1 You can tap the front display to turn it on, and tap it again or t
press the front LCD button to turn it off. Select a shooting option. 2 t
appears on the screen after a certain time, and the touch screen is locked. Self-Shot Option Description On: Turn on the front display. Self-Shot: View yourself on the front display while taking a self-portrait. (p. 40) Children: Show a short animation on the front display to make taking pictures of children easier. (p. 41) Couple Shot: Take photos of couples automatically when they lean in toward each other. (p. 41) Jump Shot: Show a visual cue on the front display so jumping subjects can time their jumps for the photo. (p. 42) Function Info: Show flash and focus information on the front display. (p. 43) Smile Icon: Show a smile icon on the front display when picture is in focus. (p. 43) When you set timer options, the front display will remain active. (p. • 48) When you turn on the front display, the icons on the touch screen • may dim. When you use the camera in brightly lit or sunny areas, you may not • be able to see the front display clearly. When you play slide shows or movies, the front display may not • activate even if you touch it. Self-Shot • is automatically selected if you do not select an option within 3 seconds. When you put pressure on the camera or open the battery cover, the • front display may activate.

Taking photos Digital zoom If the zoom indicator is in the digital range, your camera is using the digital zoom. The picture quality may deteriorate when you use the digital zoom. Optical range Digital range Zoom indicator The digital zoom is not available when using • S, s (in some scenes), d, D, and v modes and when used with Face Detection, and Smart Filter. It may take longer to save a photo when using the digital zoom. • Zooming You can shoot close-up photos by adjusting the zoom. Your camera has a 5X optical zoom and 5X digital zoom. By using both, you can zoom in up to 25 times. Push [Zoom] right to zoom in on your subject. Push [Zoom] left to zoom out. 5.0 Zoom in Zoom out Zoom ratio The zoom ratio available for videos differs.

Taking photos Reducing camera shake (OIS) Reduce camera shake optically in Shooting mode. Before correction After correction In Shooting mode, select 1 f “ > (once or twice) “ . (In D mode, select f “ .) Select an option. 2 Option Description Off: Deactivate the OIS function. On: Activate the OIS function. a p s D v OIS may not function properly when: • You move your camera to follow a moving subject. - You use digital zoom. - There is too much camera shake. - The shutter speed is slow. (For example, when you select - Night in s mode.) The battery is low. - You take a close-up shot. - If you use the OIS function with a tripod, your images may be blurred • by the vibration of the OIS sensor. Deactivate the OIS function when you use a tripod. If the camera is impacted, the display will be blurry. In this case, turn • off the camera and turn it on again to use the OIS function correctly. In some scene modes, the OIS function is unavailable. •

Holding your camera correctly Make sure nothing is blocking the lens. Half-pressing the shutter button Half-press [Shutter] and adjust the focus. Focus and exposure will be adjusted automatically. The aperture value and shutter speed are automatically set. Focus frame Press [ • Shutter] to take the photo if displayed in green. Change the frame and • half-press [Shutter] again if displayed in red. Reducing camera shake Set the Optical Image Stabilization option to • reduce camera shake optically. (p. 28) Select the • d mode to reduce camera shake both optically and digitally. (p. 36) When h is displayed Camera shake When shooting in the dark, avoid setting the flash option to Slow Sync or Off. The aperture remains open longer and it may be harder to hold the camera still. Use a tripod or set the flash option to • Fill in. (p. 50) Set ISO speed options. (p. • 51) Tips for getting a clearer photo

Preventing your subject from being out of focus It may be difficult to get your subject in focus when: There is little contrast between the subject and background. - (When your subject is wearing a color of clothing that is similar to the background.) The light source behind the subject is too bright. - The subject is shiny. - The subject includes horizontal patterns, such as blinds. - The subject is not positioned in the center of the frame. - Use the focus lock Half-press [Shutter] to focus. When the subject is in focus, you can reposition the frame to change the composition. When you are ready, press [Shutter] to take your photo. When you take photos in low light • Turn on the flash. (p. 50) When subjects are moving fast • Use the continuous or motion capture function. (p. 64)

Using the Smart Auto mode …………………………… 32 Using the Scene mode ………………………………… 33 Using the Beauty Shot mode …………………………… 34 Using the frame guide ………………………………… 35 Using the DUAL IS mode ……………………………… 36 Using the Program mode ……………………………… 37 Recording a video ……………………………………… 37 Using the Smart Scene Detection mode ……………… 39 Taking photos with the front display …………………… 40 Using the Self-portrait mode …………………………… 40 Using the Children mode ……………………………… 41 Using the Couple mode ………………………………… 41 Using the jump shot timer ……………………………… 42 Using the function information ………………………… 43 Using the smile icon …………………………………… 43 Recording a video with the front display ……………… 43 Recording voice memos ……………………………… 44 Recording a voice memo ……………………………… 44 Adding a voice memo to a photo ……………………… 44 Extended functions Learn how to take a photo by selecting a mode and how to record a video or voice memo.

Shooting modes Take photos or record videos by selecting the best shooting mode for the conditions. Icon Description Appears when taking portraits at night. Appears when taking photos of landscapes with backlighting. Appears when taking portraits with backlighting. Appears when taking portraits. Appears when taking close-up photos of objects. Appears when taking close-up photos of text. Appears when taking photos of sunsets. Appears when taking photos of clear skies. Appears when taking photos of forested areas. Appears when taking close-up photos of colorful subjects. Appears when taking close-up portraits of people. Appears when the camera and subject are stable for a while. This is available only when you are shooting in the dark. Appears when taking photos of actively moving subjects. Appears when taking photos of fireworks. This is available only when you use a tripod. Using the Smart Auto mode In this mode, your camera automatically chooses the appropriate camera settings based on a detected type of scene. The mode is helpful if you are not familiar with the camera settings for various scenes. In Shooting mode, select 1 a “ S. Align your subject in the frame. 2 The camera selects a scene automatically. An appropriate • mode icon will appear at the top left of the screen. Icon Description Appears when taking photos of landscapes. Appears when taking photos of bright white backgrounds. Appears when taking photos of landscapes at night. This is available only when the flash is off.

Shooting modes Using the Scene mode Take a photo with options preset for a specific scene. In Shooting mode, select 1 a “s. Select a scene. 2 Scene This mode allows you to choose an appropriate scene for a variety of situations. For the • Beauty Shot mode, see “Using the Beauty Shot mode” on page 34. For the • Frame Guide mode, see “Using the frame guide” on page 35. Align your subject in the frame and half-press [ 3 Shutter] to focus. Press [ 4 Shutter] to take the photo. Half-press [ 3 Shutter] to focus. Press [ 4 Shutter] to take the photo. If the camera does not recognize an appropriate scene mode, • S appears and the default settings are used. Even if there is a face detected, the camera may not select a portrait • mode depending on the subject's position or lighting. The camera may not select the correct scene depending on shooting • environments, such as camera shake, lighting and distance to the subject. Even if you use a tripod, the • mode may not be detected depending on the subject's movement.

Shooting modes To hide facial imperfections, select 3 “an option. Select a higher setting to hide a greater number of • imperfections. Level 3 Align your subject in the frame and half-press [ 4 Shutter] to focus. Press [ 5 Shutter] to take the photo. The focus distance will be set to Auto Macro. Using the Beauty Shot mode Take a photo of a person with options to hide facial imperfections. In Shooting mode, select 1 a “ s “. To make the subject's skin tone appear lighter (face 2 only), select f “ “an option. Select a higher setting to make skin tone appear lighter. • Level 2

Shooting modes Ask another person to take a photo. 3 The person must align the subject in the frame by using the • guides, and then press [Shutter] to take the photo. To cancel the guides, select 4 . When you use the frame guide, the front display is unavailable. Using the frame guide When you want another person to take a photo of you, you can compose the scene with the frame guide feature. The frame guide will help the other person take a photo of you by showing the part of the pre-composed scene. In Shooting mode, select 1 a “ s “ . Align your subject in the frame and press [ 2 Shutter]. Transparent guides will appear on the left and right of the • frame. Cancel Frame: Back

Shooting modes Press [ 3 Shutter] to take the photo. The digital zoom will not work in this mode. • The camera will correct photos optically only when you take them with • a light source that is brighter than fluorescent light. If your subject is moving rapidly, the photo may be blurry. • Set the Optical Image Stabilization option to reduce camera shake in • different shooting modes. (p. 28) Using the DUAL IS mode Reduce camera shake and prevent blurred photos with Optical and Digital Image Stabilization functions. Before correction After correction In Shooting mode, select 1 a “d. Align your subject in the frame and half-press [ 2 Shutter] to focus.

Shooting modes Recording a video Record videos of up to 20 minutes in length in high definition. The recorded video is saved as an MP4 (H.264) file. H.264 (MPEG-4 part10/AVC) is a high-compression video format • established by international standard organizations ISO/IEC and ITU-T. Some memory cards may not support high definition recording. In this • case, set a lower resolution. (p. 46) Memory cards with slow writing speed will not support high-resolution • videos and high-speed videos. To record high-resolution or high- speed videos, use memory cards with fast writing speed. When the Optical Image Stabilization ( • ) is activated, your video may be recorded with the OIS operation sound. In Shooting mode, select 1 a “ v. Select 2 f “ “a frame rate (the number of frames per second). As the number of frames increases, action appears more • natural, but the file size is increased. Using the Program mode Set various options (except for shutter speed and aperture value) in Program mode. In Shooting mode, select 1 a “ p. Set options. (For a list of options, refer to “ 2 Shooting options.”) Align your subject in the frame and half-press [ 3 Shutter] to focus. Press [ 4 Shutter] to take the photo.

Shooting modes Set other options as desired. (For options, refer to 4 “Shooting options.”) Press [ 5 Shutter] to start recording. Press [ 6 Shutter] again to stop recording. To pause recording The camera allows you to pause temporarily while recording a video. With this function, you can record your favorite scenes as a single video. Select to pause while recording. Select to resume. Stop: Shutter 30 FPS is available only when the video resolution is 320 X 240. Select 3 > “ “an option. Option Description Off: Record a video without sound. On: Record a video with sound.

Shooting modes Press [ 3 Shutter] to start recording. Press [ 4 Shutter] again to stop recording. If the camera does not recognize an appropriate scene mode, • D will not change and the default settings will be used. The camera may not select the correct scene depending on shooting • environments, such as camera shake, lighting and distance to the subject. The photo style and smart filter options are not available in • D mode. Using the Smart Scene Detection mode In this mode, your camera automatically chooses the appropriate camera settings based on a detected type of scene. In Shooting mode, select 1 a “ D. Align your subject in the frame. 2 The camera selects a scene automatically. An appropriate • mode icon will appear at the top left of the screen. Icon Description Appears when recording videos of landscapes. Appears when recording videos of clear skies. Appears when recording videos of forested areas. Appears when recording videos of sunsets.

Taking photos with the front display The front display will help you take self-portraits or photos of children. You can also use the Couple mode and the jump shot timer with the front display. You can tap the front display to turn it on, and tap it again or press the front LCD button to turn it off. Press [ 3 Shutter] to take the photo. Using the Self-portrait mode Take photos of yourself conveniently using the front display. The camera automatically takes a picture when it detects a smiling face when using the front display. In Shooting mode, press the front LCD button and 1 select . Your camera will detect your face automatically and display • a frame to indicate the detected face. Half-press [ 2 Shutter] to focus. S a p s d

Taking photos with the front display Using the Children mode This mode draws children’s attention to the camera by showing a short animation on the front display. In Shooting mode, press the front LCD button and 1 select . An animation will play. • Half-press [ 2 Shutter] to focus. Press [ 3 Shutter] to take the photo. You can download animations from the website or Intelli-studio. • (p. 91) Visit www.samsung.com or www.samsungimaging.com for more information. You can add sounds to animations to draw children's attention. (p. • 99) S a p s d Using the Couple mode This mode detects two subjects leaning in toward each other and automatically captures images of posing couples. In Shooting mode, press the front LCD button and 1 select . The white frame means that the faces are recognized. • The green frame means that the faces are in focus when you • half-press [Shutter]. Lean in toward each other in the frame. 2 The camera will detect two faces of the subjects at the same distance • from the camera. The camera may not detect the composition depending on the pose • of couples. S a p s d

Taking photos with the front display Using the jump shot timer Take a photo of people jumping. An icon will appear on the front display to tell your subjects when to jump. In Shooting mode, press the front LCD button and 1 select . Press [ 2 Shutter]. The front display will start the countdown a few seconds • before shooting. S a p s d Jump when the jump icon appears on the front display. 3 The camera will take 3 photos in succession. • If you are taking photos using the jump shot timer in low light conditions or indoors, photos may be dark.

Taking photos with the front display Using the function information Show flash and focus information on the front display when taking photos. In Shooting mode, press the front LCD button and 1 select . Half-press [ 2 Shutter] to focus. Press [ 3 Shutter] to take the photo. Using the smile icon The smile icon appears on the front display when it is focused after a shutter half-press. In Shooting mode, press the front LCD button and 1 select . Half-press [ 2 Shutter] to focus and then the smile icon appears. Press [ 3 Shutter] to take the photo. S a p s d S a p s d Recording a video with the front display Recording a video in the Self-portrait mode In Shooting mode, press the front LCD button and 1 select . Press [ 2 Shutter] to start recording. Press [ 3 Shutter] again to stop recording. Recording a video in the Children mode In Shooting mode, press the front LCD button and 1 select . Press [ 2 Shutter] to start recording. Press [ 3 Shutter] again to stop recording. D v

Recording voice memos Learn how to record a voice memo that you can play back at any time. You can add a voice memo to a photo as a short reminder of shooting conditions. You will get the best sound quality when recording 40 cm away from the camera. a p s d Adding a voice memo to a photo In Shooting mode, select 1 f “ “ . (In some modes, select f “ > (once or twice) “ “ .) Memo Align your subject in the frame and take a photo. 2 The camera begins to record a voice memo right after you • take the photo. Record a short voice memo (10 seconds maximum). 3 Press [ • Shutter] to stop recording a voice memo. You cannot add voice memos to photos in the burst mode. Recording a voice memo In Shooting mode, select 1 f “ “ . (In some modes, select f “ > (once or twice) “ “ .) Record Press [ 2 Shutter] to record. Select • to pause and to resume. Once recording begins the available recording time displayed • at the top of the screen will be changed to reflect file number. You can record voice memos of up to 10 hours in length. • Press [ 3 Shutter] to stop. Select 4 to switch to Shooting mode.

Selecting a resolution ………………………… 46 Selecting image quality ……………………… 47 Using the timer ……………………………… 48 Shooting in the dark ……………………… 50 Preventing red-eye …………………………… 50 Using the flash ……………………………… 50 Adjusting the ISO speed …………………… 51 Changing the camera’s focus …………… 52 Using macro ………………………………… 52 Using auto focus …………………………… 52 Using smart touch focus …………………… 53 Using one touch shooting …………………… 54 Adjusting the focus area ……………………… 54 Using face detection ……………………… 55 Detecting faces ……………………………… 55 Taking a smile shot …………………………… 56 Detecting eye blinking ……………………… 56 Using smart face recognition ………………… 57 Registering faces as your favorites (My Star) … 57 Adjusting brightness and color …………… 59 Adjusting the exposure manually (EV) ……… 59 Compensating for backlighting (ACB) ……… 60 Changing the metering option ……………… 61 Selecting a light source (White balance) …… 62 Using burst modes ………………………… 64 Improving your photos …………………… 65 Applying photo styles ………………………… 65 Applying smart filter effects ………………… 66 Adjusting your photos ……………………… 67 Shooting options Learn about the options you can set in Shooting mode.

Selecting a resolution and quality Learn how to change the image resolution and quality settings. Option Description 4320 X 3240: Print on A1 paper. 4320 X 2880: Print on A1 paper in wide ratio (3:2). 4000 X 3000: Print on A1 paper. 4320 X 2432: Print on A2 paper in panorama ratio (16:9) or play back on an HDTV. 3264 X 2448: Print on A3 paper. 2560 X 1920: Print on A4 paper. 2048 X 1536: Print on A5 paper. 1920 X 1080: Print on A5 paper in panorama ratio (16:9) or play back on an HDTV. 1024 X 768: Attach to an email. Selecting a resolution As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the file size will also increase. When taking a photo: In Shooting mode, select 1 f “> “ . (In some modes, select f “.) Select an option. 2 4320 x 2432 S a p s d D v

Selecting a resolution and quality When recording a video: In the 1 D and v modes, select f “. Select an option. 2 1280 X 720 HQ Option Description 1280 X 720 HQ: Play back high-quality files on an HDTV. 1280 X 720: Play back on an HDTV. 640 X 480: Play back on a general TV. 320 X 240: Post on a web page. Selecting image quality Photos you take are compressed and saved in JPEG format. Higher quality images will result in larger sizes. In Shooting mode, select 1 f “ > “ . (In some modes, select f “ .) Select an option. 2 Fine Option Description Super Fine Fine Normal a p s d

Using the timer Learn how to set the timer to delay shooting. S a p s d D v Press [ 3 Shutter] to start the timer. The AF-assist light/timer lamp blinks. The camera will • automatically take a photo at the specified time. The front display will start the countdown a few seconds • before shooting. Select the timer icon or press [ • Shutter] to cancel the timer. Depending on the selected face defection option, the timer may not • available or some timer options are not available. In Shooting mode, select 1 . Select an option. 2 Off Option Description Off: The timer is not active. 10 Sec: Take a photo in 10 seconds. 2 Sec: Take a photo in 2 seconds. Double: Take a photo in 10 seconds and take another in 2 seconds. Motion Timer: Detect your movement and then take a photo. (p. 49) The options may differ depending on the shooting mode.

Using the timer Pose for your photo while the AF-assist light/timer lamp 5 is blinking. The AF-assist light/timer lamp will stop blinking just before the • camera automatically takes a photo. The motion timer may not work when: You are more than 3 m away from the camera. • Your movements are too subtle. • There is too much light or backlight. • The subject is close enough to reflect the AF light. • Using the motion timer In Shooting mode, select 1 “ . Press [ 2 Shutter]. Stand within 3 m from the camera within 6 seconds after 3 pressing [Shutter]. Make a motion, such as waving your arms, to activate 4 the timer. The AF-assist light/timer lamp will start to blink rapidly when • the camera detects you. The detection range of the motion timer

Shooting in the dark Learn how to take photos at night or in low light conditions. Using the flash Use the flash when taking photos in the dark or when you need more light on your photos. In Shooting mode, select 1 . Select an option. 2 Auto Option Description Off: The flash will not fire. • Camera shake warning ( • ) will be displayed when shooting in low light. Auto: The camera will select a proper flash setting for the detected scene in S mode. Auto: The flash fires automatically when the subject or background is dark. S a p s Preventing red-eye If the flash fires when you take a photo of a person in the dark, a red glow may appear in the eyes. To prevent this, select Red-eye or Red-eye Fix. Refer to flash options in “Using the flash.” This option is available in some scene modes. a p

Shooting in the dark Adjusting the ISO speed The ISO speed is the measure of a film’s sensitivity to light as defined by the International Organization for Standardization (ISO). The higher ISO speed you select, the more sensitive to light your camera becomes. With a higher ISO speed, you can get a better photo without using the flash. In Shooting mode, select 1 f “ . Select an option. 2 Select • to use an appropriate ISO speed based on the brightness of the subject and lighting. Auto The higher ISO speed you select, the more image noise you may get. p Option Description Red-eye*: The flash fires when the subject or background is • dark. The camera reduces red-eyes. • Fill in: The flash always fires. • Light intensity is adjusted automatically. • Slow Sync: The flash fires and the shutter stays open longer. • Select this when you want to capture ambient light • to reveal more details in the background. Use a tripod to prevent your photos from blurring. • Red-eye Fix*: The flash fires when the subject or background is • dark. The camera corrects red-eyes through its advanced • software analysis. The options may differ depending on the shooting mode. * There is an interval between two bursts of the flash. Do not move until the flash fires a second time. Flash options are not available if you set burst options or select • Blink Detection. Make sure that your subjects are within the recommended distance • from the flash. (p. 113) If there is reflected light or much dust in the air, tiny spots may appear • on your photo.

Changing the camera’s focus Learn how to adjust the camera's focus according to your subjects. Using auto focus To take sharp photos, select the appropriate focus according to your distance from the subject. In Shooting mode, select 1 . Select an option. 2 Normal (AF) Option Description Normal (AF): Focus on a subject farther than 80 cm (farther than 80 cm when using zoom). Auto Macro: Focus on a subject farther than 5 cm (farther than 50 cm when using zoom). Macro: Focus on a subject 5 - 80 cm (50 - 80 cm when using zoom). The options may differ depending on the shooting mode. a p d D v Using macro Use macro to take close-up photos of subjects, such as flowers or insects. Refer to macro options in “Using auto focus.” Try to hold the camera very still to prevent blurry photos. • Turn off the flash if the distance to the subject is less than 40 cm. • a p d D v

Changing the camera’s focus If you do not touch any area on the screen, the focus frame will • appear in the center of the screen. Tracking a subject may fail when: • The subject is too small or the subject moves excessively. - The subject is backlit or you are shooting in a dark place. - Colors or patterns on the subject and the background are the - same. The camera shakes excessively. - In these cases, the focus frame will appear as a white single-line frame. If the camera fails to track the subject, you must reselect the subject • to track. If the camera fails to fix the focus, the focus frame will change to a red • single-line frame. If you use this function, you cannot set face detection, photo style • options, and smart filter effects. Using smart touch focus Smart Touch AF allows you to track and auto focus on your subject, even when you are moving. In Shooting mode, select 1 f “ “ . Touch the subject you want to track in the touch area 2 (indicated by a frame). A focus frame will appear on the subject and will follow the • subject as you move the camera. The white frame means that your camera is tracking the • subject. The green frame means that your subject is in focus when you • half-press [Shutter]. a p s d

Changing the camera’s focus Adjusting the focus area You can get clearer photos by selecting an appropriate focus area according to your subject’s location in the scene. In Shooting mode, select 1 f “ . Select an option. 2 Center AF Option Description Center AF: Focus on the center (suitable when subjects are located in the center). Multi AF: Focus on one or more of 9 possible areas. One Touch Shooting: Focus on the subject by touching the image on the screen. Touch and hold the subject to take the photo. Smart Touch AF: Focus on and track the subject that you touch on the screen. (p. 53) The options may differ depending on the shooting mode. a p s d Using one touch shooting You can focus on your subject and take a photo with a touch of your finger. In Shooting mode, select 1 f “ “ . Touch a subject to focus. 2 Touch and hold the subject to take the photo. 3 Touch and hold until the level indicator fills up. • If you touch and hold any other area, the frame to detect faces will • change to a normal frame. If you use this function, you cannot set burst options, photo style • options, and smart filter effects. a p s d

Using face detection If you use face detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Take photos quickly and easily by using Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them. a p s d Detecting faces Your camera automatically detects human faces (up to 10 human faces). In Shooting mode, select f “ “ . The nearest face appears in a white focus frame and the rest of the faces appear in gray focus frames. The closer you are to the subject, the quicker your camera will detect • faces. If you want to focus faces in gray focus frames, touch them to focus. • The detected faces may not be registered depending on shooting • options. In some scene modes, face detection is unavailable. • Face detection may not be effective when: • The subject is far from the camera. (The focus frame will appear - orange for Smile Shot and Blink Detection.) It is too bright or too dark. - The subject is not facing the camera. - The subject is wearing sunglasses or a mask. - The subject is in backlighting or the lighting condition is unstable. - The subject’s facial expression changes remarkably. - Face detection is not available when using a photo style or a smart • filter effect. When you use the face detection option, the digital zoom will not • work. Depending on the selected face detection option, the timer is not • available or some timer options are not available. When you take photos of detected faces, they will be registered in • the face list. You can view registered faces in order of priority in Playback mode. • (p. 72) Even though faces are registered successfully, they may not be classified in Playback mode. The detected face in Shooting mode may not appear in the face list • or Smart Album.

Using face detection Detecting eye blinking If your camera detects closed eyes, it will automatically take 2 photos in succession. In Shooting mode, select f “ “ . Hold your camera still while “ • Capturing” is displayed on the screen. When blink detection fails, “ • Picture taken with eyes closed.” message appears. Take another photo. Taking a smile shot The camera automatically releases the shutter when it detects a smiling face. In Shooting mode, select f “ “ . When your subject smiles broadly, your camera can detect the smile more easily.

Using face detection Registering faces as your favorites (My Star) You can register your favorite faces to prioritize the focus and exposure on those faces. This feature is available only when you use a memory card. In Shooting mode, select 1 f “ “ . Align your subject’s face with the oval guideline and 2 press [Shutter] to register the face. If the subject’s face is not aligned with the oval guideline, the • white frame will not appear. You will take 5 photos of the subject’s face: one each from the • front, left, right, above, and below. Take photos of one person at a time when registering faces. • Using smart face recognition The camera automatically registers faces that you frequently photograph. This feature will automatically prioritize the focus on those faces and favorite faces. This feature is available only when you use a memory card. In Shooting mode, select f “ “ . The nearest face appears in a white focus frame and the rest of the faces appear in gray focus frames. • : Indicate favorite faces (To register favorite faces, see page 57). • : Indicate faces that the camera automatically registers. The camera may recognize and register faces incorrectly depending • on lighting conditions, remarkable changes in the subject's pose or face, and whether or not the subject is wearing glasses. The camera can automatically register up to 14 faces. If the camera • recognizes a new face when there are 14 registered faces, it will replace the face in the lowest priority with the new one. The camera can detect up to 5 faces in one scene. •

Using face detection Select 3 when the face list appears. Your favorite faces are indicated with a • on the face list. You can register up to 6 favorite faces. • The flash option will be set to • Off. If you register the same face twice, you can delete one of the faces • in the face list. Viewing your favorite faces In Shooting mode, select 1 f ““ . Select 2 to view your favorite faces. To change the ranking of your favorite faces, select • . (p. 72) To cancel your favorite faces, select • .

Adjusting the exposure manually (EV) Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo. Darker (-) Neutral (0) Brighter (+) In Shooting mode, select 1 f “ . Select a value to adjust the exposure. 2 +: brighter, -: darker • -2 -1 0 +2 -2 -1 0 +2 +1 EV p d v Adjusting brightness and color Learn how to adjust the brightness and color for better image quality. Select 3 . The adjusted exposure value will appear as shown below. • Once you adjust the exposure, the setting will remain the same. You • may need to change the exposure value later to avoid overexposure or underexposure. If you cannot decide on an appropriate exposure, select • AEB (Auto Exposure Bracket). The camera takes 3 consecutive photos with different exposures: normal, underexposed, and overexposed. (p. 64)

Adjusting brightness and color Option Description Off: ACB is off. On: ACB is on. The ACB feature is always on in • a mode. This feature is not available when • Continuous, Motion Capture, or AEB is in use. Compensating for backlighting (ACB) When the light source is behind your subject or there is high contrast between your subject and the background, your subject is likely to appear dark in the photo. In this case, set the Auto Contrast Balance (ACB) option. Without ACB With ACB In Shooting mode, select 1 f “>“ . Select an option. 2 Off p

Adjusting brightness and color Option Description Spot: Your camera measures only the light intensity of the • very center of the frame. If a subject is not in the center of the frame, your • photo may be improperly exposed. Suitable for a subject with backlighting. • Center-weighted: Your camera averages the meter reading of the • entire frame with emphasis placed on the center. Suitable for photos with subjects in the center of • the frame. Changing the metering option The metering mode refers to the way in which a camera measures the quantity of light. The brightness and lighting of your photos will vary depending on the metering mode you select. In Shooting mode, select 1 f “ > “ . (In v mode, select f “ .) Select an option. 2 Multi Option Description Multi: Your camera divides the frame into several areas, • and then measures the light intensity of each area. Suitable for general photos. • p d v

Adjusting brightness and color Auto WB Option Description Auto WB: Use automatic settings depending on the lighting conditions. Daylight: Select when taking outdoor photos on a sunny day. Cloudy: Select when taking outdoor photos on a cloudy day or in shadows. Fluorescent_H: Select when shooting under a daylight fluorescent or three-way fluorescent light. Fluorescent_L: Select when shooting under white fluorescent light. Tungsten: Select when taking indoor photos under incandescent bulbs or halogen lamps. Custom Set: Use your pre-defined settings. (p. 63) Selecting a light source (White balance) The color of your photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select an appropriate lighting condition to calibrate the white balance, such as Auto WB, Daylight, Cloudy, or Tungsten. Auto WB Daylight Cloudy Tungsten In Shooting mode, select 1 f “. Select an option. 2 p d v

Adjusting brightness and color Defining your own white balance You can customize the white balance by taking photos of a white surface, such as a piece of paper. This will help you to match the colors in your photo with the actual scene after checking the lighting condition. In Shooting mode, select 1 f “ “ . Aim the lens at a piece of white paper. 2 Press [ 3 Shutter].

Using burst modes It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. In these cases, select one of the burst modes. p Option Description Motion Capture: While you are pressing [Shutter], the camera takes VGA photos (6 photos per second; maximum of 30 photos). AEB: Take 3 consecutive photos with different exposures: • normal, underexposed, and overexposed. Use a tripod to prevent blurry photos. • The options may differ depending on the shooting mode. You can use the flash, timer, and ACB only when you select • Single. When you select • Motion Capture, the resolution will be set to VGA and the ISO speed will be set to Auto. Depending on the selected face detection option, some burst • options are not available. In Shooting mode, select 1 f “ > “ . Select an option. 2 Single Option Description Single: Take a single photo. Continuous: While you are pressing [ • Shutter], the camera takes photos continuously. The maximum number of photos depends on the • capacity of your memory card.

Improving your photos Learn how to improve your photos by applying photo styles, colors, or smart filter effects, or make some adjustments. Defining your own RGB tone In Shooting mode, select 1 f “> (once or twice) ““. (In a mode, select f “ “ .) Select a color (R: Red, G: Green, B: Blue). 2 Custom RGB Adjust the amount of the selected color. 3 Select 4 . Applying photo styles Apply different styles to your photos, such as Soft, Vivid, or Forest. Soft Vivid Forest In Shooting mode, select 1 f “> (once or twice) “. (In a mode, select f “ .) Select an option. 2 Select • to define your own RGB tone. Normal If you use this function, you cannot set the face recognition, smart filter, and image adjustment options. a p d v

Improving your photos Option Description Vignetting: Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Fish-eye 1: Distort close objects to imitate the visual effect of a fisheye lens. Fish-eye 2: Blacken the edges of the frame and distort objects to imitate the visual effect of a fisheye lens. Sketch: Make a photo looks like a drawing. Defog: Make a photo clearer. If you select • Miniature when recording a video, the miniature recording time is displayed with the icon and is shorter than the real recording time. If you select • Miniature when recording a video, the sound will not be recorded. When you apply a smart filter effect while recording a video, the • recording speed will be set to and the recording resolution will be set to less than . If you use this function, you cannot set face recognition, ACB, burst, • photo style, or image adjustment options. The options may differ depending on the shooting mode. • When you select • Sketch, the photo will be automatically resized to or smaller. Applying smart filter effects Apply various filter effects to your photos to create unique images. Miniature Vignetting Fish-eye 1 Fish-eye 2 In Shooting mode, select 1 f “> (once or twice) “. Select an effect. 2 Option Description Normal: No effect Miniature: Make a photo of a life-size location or object look like a photo of a miniature scale model. Blurring parts of the photo makes the scene seem much smaller than it actually is. a p d v

Improving your photos Contrast option Description - Decrease the color and brightness. + Increase the color and brightness. Saturation option Description - Decrease the saturation. + Increase the saturation. Select • 0 if you do not want to apply any effects (suitable for printing). If you use this function, you cannot set the face recognition, photo • style, and smart filter options. Adjusting your photos Adjust the sharpness, saturation, and contrast of your photos. In Shooting mode, select 1 f “ > (twice) “. Select an adjustment option. 2 • : Sharpness • : Contrast • : Saturation Select a value to adjust the selected item. 3 -2 -1 +2 -2 -1 +2 +1 0 Sharpness Sharpness option Description - Soften the edges on your photos (suitable for editing the photos on your computer). + Sharpen the edges to improve the clarity of your photos. This may also increase the noise on your photos. p

Starting Playback mode ……………………… 69 Viewing photos ……………………………… 76 Playing a video ……………………………… 78 Playing a voice memo ……………………… 79 Editing a photo ……………………………… 81 Rotating a photo …………………………… 81 Resizing photos ……………………………… 81 Applying photo styles ………………………… 82 Applying smart filter effects ………………… 83 Applying a special effect ……………………… 84 Correcting exposure problems ……………… 84 Creating a print order (DPOF) ………………… 85 Viewing files on a TV or HDTV …………… 87 Transferring files to your computer (for Windows) ……………………………… 89 Transferring files using Intelli-studio ………… 90 Transferring files by connecting the camera as a removable disk …………………………… 92 Disconnecting the camera (for Windows XP) 93 Transferring files to your computer (for Mac) …………………………………… 94 Printing photos with a photo printer (PictBridge) ………………………………… 95 Playback/Editing Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your computer, photo printer, TV, or HDTV.

If you want to view files stored in the internal memory, remove your • memory card. The camera will not properly play back files that are too large or those • taken with cameras from other manufacturers. Starting Playback mode View photos or play videos and voice memos stored in your camera. Press [ 1 Playback]. The most recent file you have taken or recorded will be • displayed. If the camera is off, it will turn on. • Drag files left or right to scroll through files. 2 Select • < to view the previous file. Hold to view files quickly. Select • > to view the next file. Hold to view files quickly.

Your camera features a built-in motion sensor that allows you to quickly select a menu by tilting the camera. In Playback mode, tilt the camera while touching and holding . Set the current photo as your favorite photo* ( will appear on the top of the file.) Lock or unlock the current file ( will appear on the top of the file.) * You cannot set files as favorites for: Videos or voice memos. - Photos with errors or locked photos. - Photos taken with cameras from other manufacturers. - Photos taken using the motion capture option set. - Photos that are too large for the available memory. - Viewing files using motion recognition You can view files by tilting the camera. Motion recognition may not work well if you hold the camera • parallel to the ground. When you rotate the camera 90 • o or 180o while viewing a photo, the camera will automatically change the orientation of the displayed photo according to the camera direction. To deactivate this function, select • M “ . “Gesture View “ Off in Playback mode.

Information Icon Description Photo includes a voice memo v Video file Print order has been set (DPOF) Protected file Photo includes a registered face; Available only when you use a memory card Favorite file Folder name – File name Open the face list (p. 72); Available only when you use a memory card Delete files (p. 75) Play a slide show (p. 77) Start a slide show (p. 77) Motion recognition may not work well if you hold the camera parallel to the ground, as shown below.

You can change the ranking of your favorite faces or delete them. This feature is available only when you use a memory card. In Playback mode, select 1 . Select • to cancel your favorite faces. 1/2 1 2 3 4 5 6 Face List 2 Select “ a face. 1 2 3 4 Edit Ranking Select 3 , or . to change the ranking of the face and select . Icon Description Edit photos (p. 81) Select a display type (p. 24) Select a menu using motion recognition (p. 70) M Playback and settings menus Playback time of videos or voice memos Play videos or voice memos (Video p. 78/Voice memo p. 79)

• change the category and reorganize files. The front display may not activate after you access Smart Album. • Select a date, file type, weekday, color, or face. 3 You can also touch and hold • < or > to scroll through dates, file types, weekdays, colors, or faces. 29 6 1 7 Select 4 < or > to scroll through files. Select 5 to return to the normal view. Once you select a category and a menu that displays thumbnails (such as deleting multiple files or protecting selected files), the camera will display all files sorted by category or only those that match the category option. Viewing files by category in Smart Album View and manage files by categories, such as date, file type, or week. In Playback mode, select 1 . You can also access Smart Album by pushing [ • Zoom] left. Select 2 “ a category. 29 6 1 7 20 Type Date Color Week Favorite Face Option Description Type View files by the file type. Date View files by the date they were saved. Color View files by the dominant color of the image. Week View files by the weekday they were saved. Favorite View your favorite files. Face View files by recognized faces and favorite faces. (Up to 20 people)

Scan thumbnails of files. In Playback mode, push [Zoom] left to display 9 or 16 thumbnails (push [Zoom] right to return to the previous mode). 29 6 1 7 20 To Do this Scroll through files Select < or >, or drag files left or right to scroll through files. View a file Select a thumbnail. Delete files Select . (p. 75) View in 3D Select . Select a category Select . When you drag files in thumbnail mode, indication icons may appear after thumbnails have loaded. To view files in 3D view In Playback mode, select 1 “ . Drag files left or right to scroll through files. 2 Drag files left or right to move them more quickly. The faster • you drag an icon across the screen, the more files you will scroll through at a time. Select • to view files in Smart Album. 1/5 Select a file in the middle of the screen to view in the full 3 screen. Select the file to return to 3D view. • You cannot play movies or voice memos in 3D view. • The 3D feature is not available while the camera is connected to a TV. •

files. To delete a single file, In Playback mode, select a file 1 “ . Select 2 Yes to delete the file. To delete multiple files, In Playback mode, select 1 “ Multiple Delete. Select files you want to delete. 2 Select • to select all files on the current screen. Select • to cancel your selection. Select 3 “ Yes. To delete all files, In Playback mode, select 1 M. Select 2 Delete “ All “ Yes. Protecting files Protect your files from accidental deletion. In Playback mode, select 1 M. Select 2 Protect “Select. Select • All and then Lock to protect all files. Select files you want to protect. 3 Select • to select all files. Select • to cancel your selection. Select 4 .

a slide show. Enlarging a photo In Playback mode, push [Zoom] right to enlarge a photo (push [Zoom] left to reduce a photo). Scroll toward the direction you want to move. Icon Description Delete the file. Crop the enlarged photo (it will be saved as a new file). Go back to the original view. X2.0 Zoom ratio Copying files to the memory card You can copy files from the internal memory to a memory card. In Playback mode, select 1 M. Select 2 . “Copy to Card. Select 3 Yes to copy files.

This will be available when • you set Effect to . When used with an effect option other than • , the interval will be set to 1 sec. Music: Select background audio. Effect: Select a transition effect. • Select • for no effects. Select 3 to start the slide show. Touch on the screen (except for option icons) to pause the • slide show. Select • to adjust the volume of background audio or to mute the sound. Select • to switch to Playback mode. Starting a slide show You can apply effects and audio to your slide show. This function does not work for videos or voice memos. In Playback mode, select 1 . Set a slide show effect. 2 Option Description Images: Select photos (up to 2.000) for your slide show. Play Mode: Select whether or not to loop the slide show.

Select 1 at the point where you want the new video to begin and select . Select 2 to resume playback. Select 3 at the point where you want the new video to end and select . Select 4 Yes. The original video should be at least 10 seconds long. • The edited video will be saved as a new file. • Playing a video You can play a video, capture an image from a video, or crop a video. In Playback mode, select a video 1 “ . Use the following icons to control playback. 2 Icon Description Scan backward. / Pause or resume playback. Stop playback. Scan forward. Adjust volume or mute sound.

Playing a voice memo In Playback mode, select a voice memo 1 “ . Use the following icons to control playback. 2 Icon Description Scan backward. / Pause or resume playback. Stop playback. Scan forward. Adjust volume or mute sound. Capturing an image during playback Select 1 at the point where you want to save a still image. Select 2 . Select 3 Yes. A captured image will have the same file size as the original video file and will be saved as a new file.

In Playback mode, select a photo that includes a voice 1 memo “ . Use the following icons to control playback. 2 Icon Description / Pause or resume playback. Stop playback. Adjust volume or mute sound. Adding a voice memo to a photo In Playback mode, select a photo 1 “ M. Select 2 Voice Memo “ On. Press [ 3 Shutter] to record a short voice memo (10 seconds maximum). Press [ • Shutter] to stop recording a voice memo.

Perform photo editing tasks, such as rotating, resizing, eliminating red-eyes, and adjusting brightness, contrast, or saturation. Edited photos will be saved as new files. • When you edit photos that are • or larger, they will be automatically resized to a lower resolution (except when rotating or resizing photos). Resizing photos In Playback mode, select a photo 1 “ . Select 2 “an option. Select • to save the photo as a start image. (p. 99) 1920 X 1080 Select 3 . Available options differ depending on the size of the selected photo. Rotating a photo In Playback mode, select a photo 1 “ . Select 2 “an option. Left 90˚ Select 3 . The rotated photo will be saved as the same file, not a new file.

Defining your own RGB tone In Playback mode, select a photo 1 “ ““. Select a color (R: Red, G: Green, B: Blue). 2 Adjust the amount of the color. 3 Custom RGB Select 4 . Applying photo styles Apply a different color tone to the photo, such as Soft, Vivid, or Forest. The edited photo will be saved as a new file but it could be resized to a lower resolution. Soft Vivid Forest In Playback mode, select a photo 1 “ . Select 2 “an option. Select • to define your own RGB tone. (Refer to “Defining your RGB tone”) Soft Select 3 .

Applying smart filter effects Apply various filter effects to your photos to create unique images. The edited photo will be saved as a new file but it could be resized to a lower resolution. Miniature Vignetting Fish-eye 1 Fish-eye 2 In Playback mode, select a photo 1 “ . Select 2 “an effect. Miniature Select 3 .

Correcting exposure problems Adjust ACB (Auto Contrast Balance), brightness, contrast, or saturation, or remove red-eye. The edited photo will be saved as a new file but it could be resized to a lower resolution. Adjusting brightness/contrast/saturation In Playback mode, select a photo 1 “ . Select 2 “ an adjustment option. Option Description Brightness Contrast Saturation Select a value to adjust the selected item. 3 (-: less or +: more) Select 4 . Applying a special effect Apply special effects to the photo, such as color filters or noise effects. The edited photo will be saved as a new file but it could be resized to a lower resolution. In Playback mode, select a photo 1 “ . Select 2 “an option. Elegant Option Description Color Filter: Change background colors to black and white to make the main subject stand out. Elegant: Apply effects to the photo to make it brighter and softer. Add Noise: Add noise to the photo to give it an aged look. Face Retouch: Retouch the portrait photos and express faces more brightly and clearer. Select 3 .

Creating a print order (DPOF) Select photos to be printed and set options, such as number of copies or paper size. The memory card can be taken to a print shop that supports DPOF • (Digital Print Order Format) or you can print photos directly through a DPOF-compatible printer at home. Wide photos may print with the left and right edges cut off, so be • aware of the dimensions of your photos. You cannot set the DPOF for the photos stored in the internal memory. • In Playback mode, select 1 M. Select 2 DPOF “an option. Option Description Select Print the selected photos. All Print all photos. Reset Reset your settings. If you select 3 Select, select photos to print. Select • to select all files. Select • to cancel your selection. Select 4 . Removing red-eye In Playback mode, select a photo 1 “ . Select 2 “ . Select 3 . Adjusting ACB (Auto Contrast Balance) In Playback mode, select a photo 1 “ . Select 2 “ . Select 3 .

Set DPOF options. 5 Option Description Select whether to print the photos as thumbnails. (Select to print photos as thumbnails.) Specify the size of the print. Select 6 , or . to set the number of copies. Select 7 . If you specify the print size, you can print photos only with DPOF 1.1-compatible printers.

Play back photos or videos by connecting your camera to a TV using the A/V cable. View photos or play videos using the touch screen on 8 your camera. The touch screen will function as the controller for the TV • screen. Locate the option you want on the TV screen and touch where the option is located on the camera screen. When a pointer appears on the option on the TV screen, select on the camera screen. On some TVs, digital noise may occur or part of an image may not • appear. Images may not appear centered on the TV screen depending on • your TV settings. Some shooting modes are not available while the camera is • connected to a TV. In Shooting or Playback mode, select 1 M “.Select 2 .(twice)“Video Out. Select a video signal output according to your country or 3 region. (p. 101) Turn off your camera and TV. 4 Connect your camera to your TV using the A/V cable. 5 Video Audio Turn on your TV and select the video output mode using 6 the TV remote control. Turn on your camera and press [ 7 Playback].