RFI FSA10-41-DIN Installation Sheet
Read Online
Read the RFI FSA10-41-DIN Installation Sheet online using the built-in PDF viewer.
Text of the manual
Copyright RF Industries Pty Ltd 2018. Subject to change without notice.
INS 41079-3
rfiwireless.com.au
1
COMPONENTS
Assembly Instructions
Before assembling your antenna please ensure that all the components below are included in the kit.
Copyright RF Industries Pty Ltd 201 . Subject to change without notice.
rfiwireless.com.au
2
STEP 1
ASSEMBLE THE DIPOLE TO THE SCREEN AS DEPICTED BELOW ENSURING THE DIPLOLE TO SCREEN
SPACING IS SET CORRECTLY AND THE DRAIN HOLE IS FACING DOWNWARDS.
NOTE: VSWR TESTS SHOULD ONLY BE PERFORMED ONCE DIPOLE AND SCREEN ARE FULLY ASSEMBLED.
USING 2 OF THE 4 LARGE CLAMP PLATES AND THE 4 M16 STUD ASSEMBLIES INCLUDED IN THE KIT. TIGHTEN THE
M16 NUTS TO 70Nm (50 lbf.ft). LEAVE APPROXIMATELY 130mm OF THREAD PROTRUDING OUT THE BACK SIDE.
Copyright RF Industries Pty Ltd 2018. Subject to change without notice.
INS 41079-3
rfiwireless.com.au
3
STEP 2
WITH THE ANTENNA ASSEMBLY LOCATED ON THE MOUNTING TUBE ATTACH THE 2 LARGE CLAMP PLATES
AND TIGHTEN THE M16 NUTS CLAMPING THE ANTENNA ASSEMBLY TO THE MOUNTING TUBE. TIGHTEN TO
70Nm (50 lbf.ft)
Copyright RF Industries Pty Ltd 2018. Subject to change without notice.
INS 41079-3
rfiwireless.com.au
4
