Renesas RA2 Series Operation & User’s Manual

RA2L1 Group Capacitive Touch Evaluation System R12QS0040EJ0100 Rev.1.00 Page 7 of 22 Nov.16.20 RA2L1 Group 5. Customizing the Quick Start Example Project This section provides instructions on customizing the Quick Start example project. 5.1 Downloading and Installing Software Development Tools Before the Quick Start example project can be modified, it is necessary to download and install software and development tools on the host PC. The FSP, J-Link® USB drivers, and e2 studio are bundled in a downloadable platform installer available on the FSP webpage at renesas.com/ra/fs ...

RA2L1 Group Capacitive Touch Evaluation System R12QS0040EJ0100 Rev.1.00 Page 2 of 22 Nov.16.20 RA2L1 Group 図 Figure 1. Quick Start Example Project Flow ................................................................................................ 4 Figure 2. Connecting and Powering Up the Board ...................................................................................... 5 Figure 3. Board default settings ................................................................................................................... 6 Figure 4. Creating a New Workspace .. ...

Capacitive Touch Evaluation System Quick Start Guide Publication Date: Rev.1.00 Nov.16.20 Published by: Renesas Electronics Corporation ...

RA2L1 Group Capacitive Touch Evaluation System R12QS0040EJ0100 Rev.1.00 Page 17 of 22 Nov.16.20 RA2L1 Group 6. Click the Enable Monitoring button. The dialog text will change to Monitoring: Enabled. Figure 25. Enable Monitoring 7. Touch the button on the application board. The CapTouch Board Monitor RA (QE) will show a touch with a finger image on the button like the image below. Figure 26. Touch Sensor Interface (Touching Button) 8. To see a graphical representation of the button’s ‘touch counts’ on the board, return to the e2studio menu bar and open the CapTouch St ...

RA2L1 Group Capacitive Touch Evaluation System R12QS0040EJ0100 Rev.1.00 Page 11 of 22 Nov.16.20 RA2L1 Group 2. For example, in the Stacks tab of the configurator, the user can click to select modules to modify the configuration settings, as required. The following screen shot illustrates modifying the timer driver configuration. Figure 12. Modifying the Configuration Settings 3. After the desired modifications are made, click Generate Project. A dialog box may appear with an option of saving the configuration changes. Click Proceed. Figure 13. Saving the Configuration Chan ...

RA2L1 Group Capacitive Touch Evaluation System R12QS0040EJ0100 Rev.1.00 Page 4 of 22 Nov.16.20 RA2L1 Group 3. Overview of the Quick Start Example Project The Quick Start example project detects touch positions from the touch electrodes on the Capacitive Touch Evaluation Application Board which is connected to the Touch CPU board, and lights up the LEDs for the corresponding electrode positions. 3.1 Quick Start Example Project Flow Figure 1. Quick Start Example Project Flow Scan completed? Power ON / Reset Timer interrupt Start touch scan (Config01 : buttons) Store button da ...

Capacitive Touch Evaluation System Quick Start Guide Publication Date: Rev.1.00 Nov.16.20 Published by: Renesas Electronics Corporation ...