Evolution Technologies 36NT Operation & User’s Manual

warranties that the Products purchased (the “Product”) will be free from defects in materials and workmanship for a period of 2 years from the date of purchase by the Purchaser. Limited Warranty (a) This warranty is limited to the original Purchaser (“Purchaser”) and is not transferable. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. This warranty covers only those Products purchased from an authorized Horizon dealer. Third party transactions are not covered by this war ...

3 Piston & Liner Set (ABC) 4 Connecting Rod (Dual Bushing) 5 Wrist Pin w/Clips (Teflon) 6 Crankshaft (1/4 X 28) 7 Cylinder Head 8 Cylinder Head Shims 9 Prop Driver 10 Spacer Washer 11 Carburetor Retainer (Drawbar) 12 Prop Washer 13 Prop Nut (1/4 X 28) 14 Gasket Set, Engine 15 Ball Bearing, Front (Rubber Seal) 16 Ball Bearing, Rear (Open Race) 17 Screw Set, Engine 18 Muffler (Standard) 19 Muffler (Tongue Style .36) 20 Muffler Gasket & Mounting Screw Set 21 Spraybar Bracket (Remote) 22 Spraybar (Remote) 23 High-Speed Needle Valve Ratchet ...

The largest portion of the fuel is methanol (alcohol). Methanol is hygroscopic; it attracts moisture. This can cause your fuel to be contaminated with water, which will cause poor engine performance. Additionally, the UV rays in sunlight will eventually break down the nitromethane if the fuel jug is stored in sunlight for long periods of time. How can you tell when your fuel has gone “bad”? The first indications will generally be the inability to start the engines at previously run needle-valve settings. Another clue might be that the engine has very poor idl ...

revolutions, thus priming the engine. Have a helper hold your airplane. Step 4. Attach the glow driver. Step 5. Turn the engine over using an electric starter. The engine should fire within seconds of applying the starter. Step 6. Remove the glow driver. Step 7. Allow the engine to run for 30 seconds. And then adjust the needle valve for your desired ground rpm. We suggest you set the needle valve so the engine is running at a fast 4-cycle if you are using the engine for stunt and sport applications. Needle Limiters In most conditions: With cha ...