Realme RMX3201 Manual 

Before using the phone, please read the Important Information Guide (IIG) carefully. You are provided with the following standard accessories: 1 Phone, 1 Charger, 1 USB data cable, 1 Safety Guide, 1 Quick Guide, 1 SIM Ejector Tool. Standard accessories RMX3201 16.5cm(6.5'') SAR Values FCC SAR 0°C-35°C 4880mAh/18.88Wh(Min) 5000mAh/19.35Wh(Typ) 165.2×76.4×8.9(mm) 13 Megapixels +2 Megapixels +2 Megapixels Rear 5 Megapixels Front x.xxxW/kg(Head) x.xxxW/kg(Body) This guide will show you how to use the phone and its important functions. You may also visit realme ofcial website to get more information about the phone. Greetings from realme mobile Do not place the phone or battery near or inside the heating equipments, cooking equipments, high pressure vessels (such as microwave ovens, induction cooker, electric oven, heater, pressure cooker, water heater, gas stove, etc.) to prevent the battery overheating which may lead to an explosion. The original charger, data cable and battery shall be used. Unapproved chargers, data cables, or batteries that are not certifed by the manufacturer may result in electric shock, fre, explosion, or other hazards. Back cover can’t be removed. When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with temperature ranging from 5°C~35°C. How to Transfer Old Mobile Content to a New Mobile You can use realme Clone Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one. 1. If you have an old Android phone, frst scan the QR code below, then download and install Clone Phone, next open Clone Phone on both the new and old phones, and follow the on-screen instructions to complete the operation. 2. If you have an old iPhone, open Clone Phone on the new phone directly, and follow on-screen instructions to sign in to iCloud account and sync the fles. https://i.clonephone.coloros.com/download How to reboot the phone Press and hold the Power Button and Volume Up Button at the same time until the realme boot animation is displayed to reboot the phone. Ambient Light Sensor Volume Key Front Camera Power Key Receiver Radio Frequency Max. Output Power Radio Waves Specifcations LTE TDD Bluetooth 2.4G Wi-Fi 32.5±0.8dBm 29.5±0.8dBm 23.3±0.8dBm 23.2±0.8dBm 23.8±0.8dBm 23.7±0.8dBm 23.5±0.8dBm 23.7±0.8dBm 7±2dBm(EIRP) 15±2dBm(EIRP) Band 38 2.4-2.4835GHz 2.4-2.4835GHz GSM WCDMA LTE FDD 850MHz/900MHz 1800MHz/1900MHz Band 5 Band 1 Band 1 Bands 3/7/8/20/28 Band 5 23.7±0.8dBm Band 8 23±0.8dBm Bands 40/41 NFC ≤42dBuA/m @10m 13.56MHz

1 Herramienta de extracción de tarjeta SIM. Especificaciones técnicas Advertencia No coloque el teléfono o la batería cerca o dentro de equipos de calefacción, electrodomésticos (microondas, cocinas de cualquier tipo, hornos de cualquier tipo o calefactores etc.), menaje de cocina (ollas a presión etc.), para evitar que la batería se sobrecaliente y/o provoque daños en su dispositivo. Debe utilizar el cargador, cable y batería originales. Los cargadores, cables o baterías que no cuenten con la autorización y la certifcación del fabricante pueden derivar en diversos problemas como; descargas elétricas, incendios, explosiones, daños en la batería u otros peligros. Al cargar el dispositivo, colóquelo en un entorno que tenga una temperatura ambiente y ventilación normales. Es recomendable que el dispositivo sea cargado en un entorno con una temperatura que oscile entre 5 °C y 35 °C. Cómo forzar el reinicio del teléfono Mantenga presionados los botones de Encendido y Vol (+) hasta que aparezca la animación de inicio de realme para forzar el renicio del teléfono. Cómo transferir contenido antiguo a su nuevo teléfono Puede utilizar la función de realme "Clonar Teléfono" para transferir rápidamente sus fotos, vídeos, música, contactos y aplicaciones a su nuevo teléfono desde el antiguo. Para ello, siga estos pasos: 1. Si tiene un teléfono Android, primero escanee el código QR que aparece a continuación, seguidamente descargue e instale “Clonar Teléfono”, abra la aplicación en ambos teléfonos y siga las instrucciones que aparecen en pantalla para completar la operación. 2. Si tiene un iPhone antiguo, abra “Clonar Teléfono” directamente en el nuevo teléfono y siga las instrucciones que aparecen en pantalla para iniciar sesión en la cuenta de iCloud y sincronizar los archivos. https://i.clonephone.coloros.com/download Bienvenido a realme mobile Esta guía le mostrará el uso del teléfono además de sus funciones más importantes. También, puede visitar nuestra página web ofcial de realme donde obtendrá mayor información sobre el mismo. NOTA: La carcasa trasera no es extraible. 4880mAh/18,88Wh(Min) 5000mAh/19,35Wh(Typ) x,xxxW/kg(Cabeza) x,xxxW/kg(Cuerpo) FCC SAR RMX3201 165,2×76,4×8,9(mm) Batería Producto Dimensiones Valores SAR Tamaño de la pantalla 0°C-35°C Temperatura para el correcto funcionamiento 16,5cm(6,5 Pulgadas) Características Eléctricas Entrada 100-240Vca 50/60Hz 0,4A 5Vcc 2A Salida Especifcación Eléctrica del terminal móvil 3,87 Vcc Cámara Cámara trasera de 13 Mpx + 2 Mpx + 2 Mpx Cámara delantera de 5 Mpx Regulación Pasos para buscar la Regulación FCC : Diríjase a Ajustes – Información del teléfono – Regulador. Para realizar la confguración inicial (al adquirir el dispositivo o realizar un reseteo de fábrica) es necesario conectarse a una red de datos (WiFi / Datos móviles). Si no se tiene disponible la red de datos, realice la confguración sin tarjeta SIM insertada. Auricular Botón de encendido y apagado Sensor de proximidad Botones de volumen Cámara frontal Especifcaciones de ondas de radio Frecuencia Potencia máx. de salida Radio LTE TDD Bluetooth 2,4G Wi-Fi 32,5±0,8dBm 29,5±0,8dBm 23,3±0,8dBm 23,2±0,8dBm 23,8±0,8dBm 23,7±0,8dBm 23,5±0,8dBm 23,7±0,8dBm 7±2dBm(EIRP) 15±2dBm(EIRP) Band 38 2,4-2,4835GHz 2,4-2,4835GHz GSM WCDMA LTE FDD 850MHz/900MHz 1800MHz/1900MHz Band 5 Band 1 Band 1 Bands 3/7/8/20/28 Band 5 23,7±0,8dBm Band 8 23±0,8dBm Bands 40/41 NFC ≤42dBuA/m @10m 13,56MHz

the system fle by cracking, it may lead to security risks of the system. realme will not provide any support nor take any responsibility for the fnal use in these cases. 'The Important Information Guide and Warranty Card' contains information regarding safety, operation and customer service. Before using the realme smartphone, please read all the instructions and the security information below, and keep it for backup. More detailed instructions are kept in this product as an electronic fle. Please read the built-in instructions on the realme smartphone. For the latest information, please visit https://www.realme.com. This mobile phone is suitable for working in an environment of 0°C to 35°C. Temperature for storage should be between -20°C and 45°C. Excessively high or low temperatures can afect the use of mobile phones and even damage the mobile phone and battery. When using this mobile phone, please avoid places near telephone, television, radio, and ofce automation machines. Please charge this mobile phone in an environment between 5°C and 35°C, so as not to reduce battery performance and standby time. If the phone has a fash charging function, it may not be able to enter the fash charging mode when the temperature is below 15°C or over 35°C.

Please do not weld battery terminals. Otherwise, it may cause battery leakage, overheat, explosion and fre. Please do not press or pierce the battery with hard objects (for example needle or other sharp objects), to avoid damage, battery leak, overheating or fre. Battery liquid may be harmful if contacted with skin or clothes, your skin might be hurt. Please immediately wash it with water, or go to hospital at once to seek medical help if necessary. If there are any abnormalities like high temperature, discoloration, distortion, bulging, leakage, etc. during operation, charging or preservation, please cease to use the device. Do not expose the battery liquid to eyes. It might cause potential blindness. When happens, wash your eyes immediately or go to the hospital if serious. Do not disassemble or modify the battery, as it may cause battery leakage, overheating, explosion or fre. Do not place or use the battery near fre, heater or other high temperature places. Otherwise, it may cause battery leakage, overheat, explosion or fre. If there is battery leakage or strange smell, please immediately move it from open fame in order to avoid fre or explosion. Please keep the battery away from moist or wet areas from moisture. Otherwise, it may cause battery overheat, fuming and corrosion. 2

make battery performance descend and service life afected. Keep the battery in a well-ventilated area. Other matters of attention Adapter shall be installed near the equipment and shall be easily accessible. To prevent possible hearing damage, do not listen at high volume levels for long periods. Warning: Please do not charge the battery over 12 hours. Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Do not use the battery or connect it with a high-voltage power supply, otherwise it may cause a short circuit or burst. The battery can be charged and discharged hundreds of times at least, but it will eventually wear out. Do not dispose the battery as household waste. Dispose the battery according to local regulations. If any part of the product is cracked or damaged, discontinue use immediately and contact the realme Service Center.

Waste Electrical and Electronic Equipment (WEEE) realme mobiles will seek shared responsibility and cooperation from customers in reducing the environmental impact of their products. realme mobiles will comply with all the applicable laws related to WEEE management. This symbol means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, user has the choice to give his product to a competent recycling organization. Proper recycling of your product will protect human health and the environment. This device was tested for typical body-worn operations with the back of the handset kept 0.5cm away. To maintain compliance with RF exposure requirements, use accessories that maintain a 0.5cm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided. If you are using pacemaker, hearing aid, cochlear implant or other device, please use the phone according to the doctor’s advice.

Hereby, Realme Chongqing Mobile Telecommunications Corp., Ltd. declares that this wireless device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.realme.com/global/support/ eu-declaration. Notice: Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network.

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5cm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC ID:2AUYFRMX3201

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help - This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.