Lumens VC-TR1 Quick Installation Manual

3. One button for Auto-Tracking 2. Installation 4. Advance Settings *Manually Add devices : Go to the device list. Click the Device Manager and follow steps 1 to 5. 8m 2.4m 1.1 1.2 Download & install the Lumens CMS software with 1.3 VC-TR1/PC/LC200, every equipment needs to use the same network. Get the VC-TR1 camera in place. https://www.MyLumens.com/CMS 2.1 Accessory DC 12V or PoE+(IEEE802.3at) for power supply. 2.2 Default Resolution is 1080P, you can change it by CMS or another button feature. 2.3 The VC-TR1 trace-range limitation is 4~15m, suggested range is 8m. 2.4 The installation height limitation is 2~3m, suggested height is 2.4m. 3.1 3.3 Press the remote “F1”button to start auto-tracking. Turn on the VC-TR1 camera. 3.2 Let a person stand 4-15 meters in front of the camera. 4.1 Before setting up, please first press the F2 button on the remote control to turn off the auto-tracking. 4.2 Start software. 4.3 Wait for 5-7 seconds. The VC-TR1 will appear on the device list -> Twice click on the device, you will see the live view instantly. Lumens CMS 1. Before Starting 2. Installation VC-TR1 Quick Installation Guide 3. One button for Auto-Tracking 4. Advance Settings j k l n m Copyright ©2020 Lumens Digital Optics Inc. All rights reserved. 5100401-51 MAY. 2021

4.5 Stage Frame www.MyLumens.com Copyright ©2020 Lumens Digital Optics Inc. All rights reserved. 4.6 Tracking Area If you want more “close-up”view of your presenter, you need to set the presenter frame. Click [Presenter Frame] and adjust Pan-Tilt-Zoom, and set it to preset 1. We advice the presenter's face shall be in the yellow auxiliary frame. E When there is no presenter to track, the view will automatically go back to the stage frame. Click [Stage Frame] and adjust Pan-Tilt-Zoom, and set it to preset 0. We suggest users set the entire stage view. E This is the user-defined zone that represents the tracking enabled area. Click [Settings] and then [Tracking area] -> Click and hold down the left mouse button and drag to draw a tracking area -> Click [Save] -> Click [Return] then back to Live view. 4.7 Blocked Area This is used to shield a moving object that may have impacts on tracking accuracy. Select one block area -> Click and hold the left mouse button and drag to draw a tracking area -> Click [Save] -> Click [Return] then back to Live view. 4.8 Click [Start] to start auto-tracking. V V V 1 2 3