Racelogic PBT-V1 Quick Start Manual

Performance Box Touch features a 10 Hz GPS receiver and a responsive 4.3” colour touch screen. The Decel Mode allows you to perform acceleration tests using pre-defined configurations, or using your own specified values. Registration So that Racelogic can continue to provide you with notification of the latest software releases, firmware upgrades and to offer technical support, please register your Performance Box Touch. Register your unit here. What’s Included RLPBT-V1 Product Code Quantity Description PBT-V1 1 Performance Box Touch Unit RLACS184 1 Cigar Plug USB Adapter USB2-007241 1 USB 2.0 A to Right Angle Micro B data and Charging Cable, 1.5 m RLACS313 1 8 GB SD Ultima Pro UHS-1 Memory Card RLACS277 1 Swivel Neck Richter Suction Mount https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/ Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide 1

RLACS184 1 Cigar Plug USB Adapter USB2-007241 2 USB 2.0 A to Right Angle Micro B data and Charging Cable, 1.5 m RLACS313 1 8 GB SD Ultima Pro UHS-1 Memory Card RLACS277 1 Swivel Neck Richter Suction Mount RLACS290 1 Performance Box Touch Battery RLACS284 1 GPS/GLONASS Low Profile Antenna, 2 m RLACS281 1 Plastic Carry Case https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/ Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide 2

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/ Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide 3

Hardware Overview Left Side Right Side https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/ Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide 4

GB SDHC card in a FAT32 file format, which is the only file format supported. If you are looking to purchase a new SD card, it is recommended that any card used has a write speed of above 7 MB/s (4 MB/s absolute minimum) and a speed class of 10 (4 absolute minimum). Racelogic recommend SD cards from quality brands such as Transcend, SanDisk, Kingston or Lexar to ensure best results. IMPORTANT – If an SD card is formatted in the exFAT or NTFS file formats, it will need to be reformatted into a FAT32 file system before it will work with a Performance Box Touch unit. More information on this can be found here. Screen Overview https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/ Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide 5

clear view of the sky without any interference, an additional antenna is not required. However, if required, mount the external GPS antenna (RLACS284) in the centre of the roof of the vehicle, away from roof bars and other antennas. For more information on antenna mounting positions click here. 2. If applicable, connect the external GPS antenna to the Performance Box Touch. 3. Connect the Battery (RLACS290) if required. For more information on the battery click here. 4. Connect the Swivel Neck Richter Suction Mount (RLACS277) to the rear of the unit or battery and attach to the vehicle windscreen. For more information on mounting click here. 5. Connect the power via the Power socket, or if using the battery independent of a power source, press and hold the Power button on the battery for a few seconds. 6. Insert the SD card into the Side of the Unit. The SD Card Icon should display as green as long as the card has free space. https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/ Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide 6

and press DECEL if it is not already selected. 8. Select the Settings Button , then the Decel option and choose from either a Preset Test, or use Custom Start and End Parameters. 9. If you would like an audible and visual alert when the test is completed, enable Alert at End within the Settings. 10. Press the Exit Button to return to the Decel Test screen. https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/ Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide 7

should display as solid green . Note: The first time that the unit is used, it may take up to 10 – 15 minutes to fully acquire satellites. After this, it will usually take 1 – 2 minutes to acquire satellites. 12. The unit is now ready to display live Decel Test results. 13. By default, Performance Box Touch will automatically start recording when travelling over 0.5 km/h, this can be changed within the General Settings. 14. Tapping on the SD Card Icon when green will manually start or stop logging data, overriding the Configured Logging Strategy. 15. The Record Icon will show when the unit is logging data to the SD card. If you have come to a stop, but the Record Icon is still on, press the SD Card Icon to stop the logging before removing the card. Sometimes, due to poor satellite visibility in a garage or close to a building, the box may start recording, even if the car is stationary. Always check the Record Icon before ejecting the card. IMPORTANT – The SD card shouldn't be removed when the Record Icon is on as you may lose data. Note: If for some reason the SD card is removed whilst still recording, it may need to be repaired using a PC before it can be reused. https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/ Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide 8

. 17. To reset all test results shown on the current screen, press the Reset Button . 18. When you have finished your testing, completed test results can be viewed by pressing the Results Button . More information on Decel Mode testing can be found here. Data Analysis A recorded session will be saved within the SD card as a .vbo file. This can be later analysed using VBOX Test Suite or Circuit Tools software, which can be downloaded from the VBOX Automotive Website. Features include graphical display of logged parameters, full circuit plot, overlaid comparison laps and detailed performance analysis. VBOX Test Suite Circuit Tools https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/ Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide 9