Lockly DEADBOLT EDITION 7S Installation Manual

INSTALLATION OVERVIEW & PARTS LIST U SCAN & SAVE LOCK SERIAL ACTIVATION CODE PGDXXXXXXXXX XXXXXXXX

1.2 Prepare door and remove existing lock. If necessary, use provided Installation Template to prepare door. Phillips Screwdriver Flathead Screwdriver Ruler 1-⅜" (35mm) to 2" (50mm) 1" (25mm) 2-⅜" (60mm) or 2-¾" (70mm) 2-⅛" (54mm) STEP 1. PREPARE DOOR FOR INSTALLATION

adjust as shown below: 2.1.1 Wear gloves during adjustment to prevent pinching your hands II. Hold the metal plate (c) and twist the deadbolt body (d) clockwise till it snaps to 2-3/8" III. To return to default status, while the deadbolt (b) is extended, hold the metal plate (c) and twist the dead- bolt body (d) counter-clock- wise till it snaps to 2-3/4" (b) (a) （c） （d） （c） （d） I. Push the crank (a) to extend the deadbolt (b) Deadbolt at 2-3/4" (70mm) (default shipping status) STEP 2. ADJUST DEADBOLT AND INSTALL

flat head screwdriver on the slit hole or by pushing the crank towards the metal face plate. 2.3 Insert the Deadbolt to the edge door hole, make sure that its right side up and the slit hole is in vertical position, then secure with 2 screws (K) K(2X) STEP 2. ADJUST DEADBOLT AND INSTALL 1 2

on the door, make sure the torque blade is in vertical position and the deadbolt is extended. Vertical When installing the exterior assembly, make sure the deadbolt is fully extended and the slit hole is vertically positioned on the bottom, the torque blade should be inserted in a vertical position. M B Peel paper off the Adhesive tape 3.3 Place the exterior assembly on the door by inserting the torque blade on a vertical position to the deadbolt slit hole and guide the cable under the deadbolt. Secure with the adhesive strips. EXTERIOR VIEW (1) 3.1 To secure Exterior Assembly of lock, peel the cover off the adhesive strips STEP 3. INSTALLING THE EXTERIOR ASSEMBLY

alignment to your door hole before you peel of the cover off the adhesive strip. 4.3: Without using any tools, insert 2 screws (G) on the side of the torque blade. By using hand carefully, turn the screws clockwise to catch the thread, then counter clockwise to make sure they are not cross threaded and turns smoothly. Make five turns before using a screw driver to tighten the screws until the mounting plate is securely placed to the door. 4.4: After securing the mounting plate, use the physical key and try to unlock/lock to check if the deadbolt is moving and not stuck. Do not forget to take out the key before proceeding to next steps. 4.2: Place the mounting plate on the interior side of the door. Guide the cable to the opening ear on the side of mounting plate and make sure the torque blade is at the center of the mounting plate. STEP 4. INSTALLING THE INTERIOR ASSEMBLY (F)

lock and disconnect the cable, make sure to press the snap to release the plug before carefully pulling it out. Do not force to pull the plug as this may result to lose connection and damage the lock. 5.1 Plug the cable that is coming through the door into the Interior lock. Make sure you match the direction of the plug correctly and matching the red side of the plug with the red side on the lock. Secure the connection by ensuring the snap is inserted tightly. STEP 5. INSTALLING THE INTERIOR ASSEMBLY (F)

5.2 Before placing the interior assembly to the mounting plate, ensure the thumb turn is vertical. 5.3 Place the interior assembly against the mounting plate and make sure the torque blade is inserted to the thumb turn shaft. 5.4 Secure the interior assembly with 2 screws (I) Torque Blade Thumb turn shaft Push the thumb turn shaft into the torque blade. MAKE SURE IT IS IN THE VERTICAL POSITION

last battery, press and hold the PROGRAM button while installing the last battery until you hear a beep from Lockly®. Lockly® will then perform a self check and the keypad screen will start to initiate. This self check will automatically determine and set your door lock to a left open or right open door. + - + - + - + - RESET PROGRAM After the lock finished the self-check, do the 2-steps below to ensure your lock is properly installed: 1. Manually lock and unlock your door by using the thumb turn and the key to make sure the deadbolt moves smoothly. If you feel that there is a tight tension while you are turning, it means that the lock may have not been installed straight. Go back to Step 2 and re-install the lock. IMPORTANT: If your lock is not properly installed, it will open and close repeatedly at times and/or it will reduce battery life. 2. Swipe your hand across the touchscreen keypad, the lock will close. If the deadbolt bounces and unlocks automatically, it means that your lock was installed incorrectly. Go back Step 2 to make sure your lock was installed with the (a) deadbolt extended and (b) the torque blade was inserted vertically while the deadbolt was extended. After you checked that the lock manually lock and unlock properly and deadbolt moves smoothly, install the Battery Cover (H) and secure with screw. STEP 6. INSTALLING BATTERIES

Install the door strike to your door frame and proceed to the last step of installation of your new lock. You may use our supplied door strike or use your existing door strike as long as the deadbolt moves smoothly in and out of the door strike. As there are many types of doors, you may need to make slight adjustments so the deadbolt moves smoothly. If anything is rubbing against the deadbolt when locking and unlocking, you may experience a warning sound (rapid beeping) indicating that the lock is experiencing misalignment or something is blocking the deadbolt. STEP 7. INSTALLATING DOOR STRIKE

Congratulations! You have completed the Lockly® Model 7S physical lock installation. To com-plete your setup, download the Lockly® app from the iOS or Google Play app Store and follow on-screen instructions. STEP 8. DOWNLOAD LOCKLY® APP

Lock, unlock, and monitor your smart lock remotely, whenever, wherever. The 2.4 GHz ( 802.11 b/g/n) Wi-Fi enabled hub connects seamlessly to your smart lock and app, and provides live updates whenever you need them including live access history without connecting via Bluetooth to the lock. Connected. Wireless Door Sensors No more worries wondering if your door was shut when you locked your door. Included is a set of wireless door sensors that can provide accurate information on the status of your door. Whether it's securely shut or still open. You can add live status monitoring and voice control capabilities to your Lockly® Smart Lock with Amazon Alexa or Google Assistant via installing the Secure Link Wi-Fi Hub and Door Sensors (Sold Separately) Know it’s Closed. PGH200 SECURE LINK Amazon Alexa or Google Assistant Configure your voice commands in your Alexa or Google Assistant app to work with your smart lock. Give commands like “Is my front door locked?” or “Lock my front door” Smart Home Integration Get one now to enable the above features. https://lockly.com/hub

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement The Secure Link Wi-Fi Hub complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with minimum distance 20cm between the radiator & your body. IC WARNING This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(2) This device must accept any interference, including interference that may cause undesired opera- tion of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. IC Radiation Exposure Statement This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Cet équipement est conforme à l'exemption des limites d'évaluation habituelle de la section 2.5 de la norme RSS-102. Il doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et toute partie de votre corps. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer. For more information go to www.P65Wamings.ca.gov.