montpellier MW8140P Installation And Operating Instructions Manual

plates should be inserted aligning to hole plates otherwise water may leak. • Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped. Rotate lower cover cap directly to make water run into basin. • When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely re-tighte ...

Unit 1, Tewkesbury Retail Park, Northway Lane, Tewkesbury, Gloucestershire GL20 8JU www.montpellier-appliances.com The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of ...

shows other alarm codes After the check, activate the appliance. If the problem occurs again, contact the service. The start of the appliance does not work or it stops during operation. First try to find a solution to the problem, If not, contact the service centre. Note! Description Reason Solution Restart after the door is closed Check if the clothes is stuck Door is not closed properly Door can’t be opened Washer's safety protection design is working Disconnect the power, restart the product Water leakage The connection between ...

water (optional) Supply hose cold water Drain hose (optional support ) • The product line chart is for reference only, please refer to real product as standard. Note! Drum Power supply cord Control panel Detergent dispenser Service filter Door Water supply hose Top cover Drain hose Owner’s manual INSTALLATION ...

shows other alarm codes After the check, activate the appliance. If the problem occurs again, contact the service. The start of the appliance does not work or it stops during operation. First try to find a solution to the problem, If not, contact the service centre. Note! Description Reason Solution Restart after the door is closed Check if the clothes is stuck Door is not closed properly Door can’t be opened Washer's safety protection design is working Disconnect the power, restart the product Water leakage The connection between ...

40 Sport 30 Delicate 40 Mix Temp. (°C) Cotton Eco 30 Washing Programmes Table Energy test program: Cotton Eco 60/40 . Speed: the highest speed; Other as the default. • The EU energy efficiency class is: A+++ °C • The AR energy efficiency class is: A. Energy test program: Cotton Eco(AR) 40°C. Half load for 6.0/7.0/8.0/9.0/10.0Kg machine:3.0/3.5/4.0/4.5/5.0Kg. • “Cotton Eco 60/40°C ” is the standard washing programs t ...

1.Close the tap. 2.Remove the water supply hose from the tap. 3.clean the filter. 4.Reconnect the . water supply hose Cleaning The Inlet Filter • Inlet filter must be cleaned if there is less water. • If the brush is not clean, you can pull out the filter washed separately; • Reconnect, turn on the tap. Washing the filter in washing machine: 1.Screw off the inlet pipe from the backside of the machine. 2.Pull out the filter with long nose pliers and reinstall it back after being washed. 3.Use to clean the filter. 4.Reconnect the inlet pipe. the brush ...