modway EEI-4265 Assembly Instructions Manual

Page 1 of 10 Thank you for purchasing the MODWAY TV STAND ! Before you start, here are some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2. it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for. Approximate assembly time: 70 minutes. 3.Please do not use any tools other than those provided or recommended in these instructions. 4.Please do not throw away any of the packaging or instructions until you have checked all the components and hardware and the furniture is fully assembled. 5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the components from time to time, so please save the tools that have been provided. 6.Please keep all pieces out of reach of children. TV STAND Owing to the size and weight of the TV Stand, we recommend that Q) x 3 L) x 8 G) x 4 B) Camlock/Metal Ø 15 mm x 16 R) M) x 8 H) x 2 C) Dowel/Wood Ø 8 x 30 mm x 28 P) x 8 K) x 10 F) x 4 A) Cambolt/Metal Ø 6 x 35 mm Ø 15 mm x 16 N) x 2 I) x 5 D) x 16 O) x 4 J) x 1 E) Screw/Metal Screw/Metal Screw/Metal M 7 x 50 mm M 6.4 x 14 mm M 12 x 45 mm x 1 Hardware : Grommet Cover / Plastic Short Bracket / Aluminium Long Bracket /Aluminium Ø 8 x 19 mm Pin Sliding Top/Plastic Ø 8 x 16 mm Pin Sliding Bottom/Plastic 5002 Wall Plug/Plastic Ø 8 mm Screw Cup/Plastic Screwdriver (Not Include) x 1 L 4 Hex/Allen Key/Metal Bumper /Silicon EEI-4265 Wall Mounted Bolt/Metal Plastic Shelf Support/Metal

Page 2 of 10 www.modway.com Components: 5 1 2 3 6 7 4 8 9 Top Board x1 Center Board 1 x1 Center Board 2 x1 Back Board x1 Wooden Door x2 Adjustable Shelf x1 Bottom Board x1 Side Board Left x1 Side Board Right x1 TV STAND EEI-4265

Page 3 of 10 www.modway.com STEP 1: Hardware required. Screwdriver not included Ax4 Cx16 Rx1 TV STAND Hardware required. Screwdriver not included Ax12 Cx12 Ex1 Ix5 Kx10 Rx1 STEP 2: E EEI-4265

Page 4 of 10 www.modway.com STEP 3: STEP 4: Bx4 Rx1 TV STAND Hardware required. Screwdriver not included Bx4 Hx1 Px4 Rx1 BACK VIEW EEI-4265

Page 5 of 10 www.modway.com STEP 5: STEP 6: Hardware required. Screwdriver not included Bx4 Px4 Rx1 TV STAND Hardware required. Screwdriver not included Bx4 Rx1 EEI-4265

Customer Service 908-368-1025 www.modway.com STEP 7: STEP 8: TV STAND Hardware required. Dx4 E Hx1 Hardware required. Dx12 E EEI-4265

Page 7 of 10 www.modway.com STEP 9: STEP 10: TV STAND Determine your desired (Y) height, then subtract by 127 mm. This is the drill holes height from the floor (Z). ( Z ) 127 ( Y ) EEI-4265 * Long Bracket Different wall materials require unique wall fasteners. The wall plugs (M) and screws (L) are designed for fixing to concrete walls only. Please consult your local hardware store to ensure you are using the correct hardware for your wall type. Please use minimum 1 hole from each hole group to apply the wall plug and screw. Use additional holes when necessary. L M J

Page 8 of 10 www.modway.com STEP 11: STEP 12: TV STAND Nx2 Rx1 Hardware required. Screwdriver not included EEI-4265 Hardware required. Screwdriver not included Jx1 Lx5 Mx5 Rx1 L J Use Waterpass to ensure the drill position 1 2 3 4 5 *Start from middle hole (1) then use waterpass to mark screw position (2),(3) then followed by (4),(5), or additional holes when necessary

Page 9 of 10 www.modway.com TV STAND Hardware required. Fx4 Gx4 Ox4 Hardware required. STEP 14: EEI-4265

Customer Service 908-368-1025︱ Page 10 of 10 www.modway.com STEP 15: TV STAND Qx3 Q Hardware required. EEI-4265 STEP 16: