Pace PH 100 Operation Manual
Text of the manual
- 1 -
PH 100
Low Profile IR Pre-heater
Operations Manual
Manual Number 5050-0587 Rev. C
Applies to
8007-0572 PH 100 115-120VAC, 50/60Hz
8007-0573 PH 100E 230VAC, 50/60Hz
With Program Version 2.4
- 2 -
PACE PH 100 Table of Contents
PH 100 Identification/Overview ........................................................................................ - 1 -
Packaging Contents ...................................................................................................... - 2 -
Specifications .......................................................
- 1 -
PH 100 Identification/Overview
Front/Top View
1
Magnetic Feet (large shown)
2
Aluminum Board Holder Rails
3
Steel Board Holder Supports
4
Resistive Touch Screen Control Panel
5
Ceramic Glass Heat Diffuser
1
Power Switch
2
Fuse Socket: 6.3x32 mm
3
USB 2.0 Port
4
Top Sensor
K-type Thermocouple connector
5
Bottom Sensor
K-type Thermocouple connector
6
Po
- 2 -
Packaging Contents
Description
Qty.
PH 100 Preheater
1
Power Cord
1
K-type Thermocouple
2
Aluminum bars, notched for holding board
13 in. (330 mm) long
2
Steel bars, board holder support rails,
12.125 in (307 mm) long
2
Small magnetic feet
4
Large magnetic feet
4
Specifications
Part Number
(Domestic)- 8007-0572
(Export)- 8007-0573
Dimensions
3 in. H (w
- 3 -
Safety Precautions
1. NEVER touch the display with a hot soldering iron or other hot tools.
2. Wait one hour after unpacking the device to allow any condensation built up during transport to
dissipate.
3. Do not expose the device to water or other moisture.
4. The PH 100 Preheater must only be used indoors near a suitable power source. Avoid using exte
