Nuheara IQbuds2 Quick Start Manual

FRONT LIGHTS (IQBUDS CHARGE) What Do These Lights Mean? Battery Life Front Lights (IQbuds Charge) IQbuds2 Battery Life Side Light (Case Charge) (Plugged in with USB cable) Side Light (Case Charge) IQbuds are Charged Your case carries and charges your IQbuds. Your case provides you with the convenience of charging your IQbuds when you are out and about. You can charge your case via the USB cable connected to a USB power source (Wall charger, computer, etc.) The case has lights that indicate different states, please see below: Up to 5 Hours Of streaming media Up to 8 Hours Of hearing features *Battery life may be less if using hearing features and streaming media simultaneously. (Music and Video) (World volume, Ear ID, etc.) Case is Charged Your case holds more than 1 full charge for your IQbuds IQbuds are Charging Case is Charging Your case holds less than 1 full charge for your IQbuds SIDE LIGHT (CASE CHARGE) *Please note that the lights will turn on when the case is opened or closed. The lights will then turn off after a few seconds for battery efficiency. *Your IQbuds will need to be in the case for the front lights to activate.

INSERTING IQBUDS FIT LIKE AN EARPLUG EXPERIMENT WITH TIPS Check the IQbuds for left and right markings to make sure you put the correct bud in the correct ear. Make sure the tip is at the bottom before inserting. For high quality bass and noise reduction IQbuds need to form an airtight seal. Push the buds into your ears as you would an earplug. Pick the largest size ear tip that fits in your ear comfortably and forms the best seal. The tips should pull off the IQbuds fairly easily, hold the silicone or foam and pull to remove.

IQbuds Set up instructions in the app: IQbuds Set up instructions in the app: IQbuds Set up instructions in the app: IQbuds APP SETUP + PAIRING PAIRING To activate pairing mode, hold both tap sensors for about 5 seconds, Wait until you hear “Pairing”. This will allow your phone to discover your IQbuds in bluetooth settings and in the app. All set up instructions will be in the app to guide you. Download the IQbuds app to begin the set up process. IQbuds Nuheara TAP TOUCH These highlighted green surfaces are the tap sensors. You can control different features with tap gestures.

bluetooth is on. Find the name that matches on the left (XXX represents a unique code). Once IQbuds are connected, return to the app to continue the process. When back in the app, you will be shown the bluetooth pairing pop up message, tap “Pair”. After the pairing screen you will be presented with different options based on what software version your phone is running. iPhones with iOS 13 and above will allow you to pair in the app. You will be shown a pop up message asking you to pair, like this: If your iPhone is on a software version lower than iOS 13, you will be asked to leave the app, go to bluetooth settings and connect to your IQbuds there, see below: Tap “Pair” and you will be able to proceed through the app to complete the process. *IQbuds2MAX_XXX All IQbuds have a unique 3 letter/number code If you are unsure of your phone software version, please go to: Settings > General > About > There will be an item called “Software Version” and the version number is displayed next to it. Make sure Bluetooth is on Tap this to connect IQbuds2MAX_XXX

Tap this to connect IQbudsMAX2_XXX Android You will be shown a connected screen and be able to proceed through the app. After the pairing screen you will be presented with a pop up message asking you to connect, like this: If you have not activated pairing properly you may be taken back to the pairing screen, in which case try the pairing action again and wait until you hear “Pairing”. You will then be presented with the screen below: Please go to bluetooth settings and make sure bluetooth is on. Find the name that matches on the left (XXX represents a unique code). Once IQbuds are connected, return to the app to complete the process. *IQbuds2MAX_XXX All IQbuds have a unique three letter/number code Tap “Connect” and you will be able to proceed through the app to complete the process.

Please note the below are default settings. You can customize them in Tap Touch in the app. This allows you to pick and choose different functions to assign to different tap gestures so you can personalize the way you control your IQbuds. *Phone call functions cannot be changed Left Tap Right Tap Play/Pause Phone Call Functions: Answer Call Mute Call On/Off Phone Call Functions: Reject/Hang up call World On/Off Activate Siri Activate Siri None Change Location Left Double Tap Right Double Tap Left Long Tap Right Long Tap