METHVEN 02-4100 Installation Manual

ABN 15 104 813 390 Melbourne, Australia www.methven.com www.methven.com Futura Shower Mixer 02-4100 02-8016 Use of this product in non-domestic applications voids warranty. Avoid restrictive piping, fittings and sharp angled bends when plumbing the mixer. All pipe work must be thoroughly flushed prior to the installation of the mixer. NEFA inline filters must be installed on both hot and cold supplies. Do not remove the ceramic cartridge from the mixer when installing. Damage caused by hydrostatic testing is not covered by our warranty. IMPORTANT Please read all of the instructions before installation Installation Guide APR 2017 MA433345

THE METHVEN GUARANTEE The warranty statement shall apply to all tapware & showers supplied by Methven For more information visit www.methven.com THIS WARRANTY ISSUED BY: Methven Australia Pty Ltd, Melbourne Australia Technical Specifications Inlet Connections: All 1/2’ BSP Operating Pressure: Min: 35kPa, Max 1000kPa. Recommended 150 - 500kPa. Install a NEFA PLV if supply exceeds 500kPa. Operating Temperatures: Recommended hot water supply 50°C, maximum 70°C. AS 3500 requires all hot water supplies to any sanitary fitting to be tempered to 50°C. ‘In situ’ Testing The maximum working pressure of the ceramic cartridge is 1000kPa. Do not hydrostatic test the installation with this mixer installed. Damage to the ceramic cartridge may occur, voiding our warranty. For Mains Pressure (Equal Pressure) systems fit shower as supplied. Red & Blue jets not required.