North Star 2681022 Owner's Manual

Outlet……………………………………………… Quick connect, ¾" female Bypass……………………………………………... Quick connect, ¾" female Gauge (2)…………………………………………... NPT, ¼" female Maximum pressure…………………………………….. 100 psi (7 bar) Maximum flow………………………………………….7.0 GPM (27 LPM) Maximum fluid temperature…………………………… 120°F (50°C) Component ...

7 Unpack and inspect parts  If you have damaged components: Contact the freight company that delivered the unit to report the damage. Then, contact NorthStar Product Support at 1-800-270-0810.  If you have missing components: Contact NorthStar Product Support at 1-800-270-0810. Regulator 791443 Grommet 784519 Screw (4) 791504 QC Clip 788429 Pressure Gauge 791465 Pump Mounting Plate (for 2287181, 2287182, 2681852) 791457 QC x 3/8 HB, Elbow 787196 QC x 3/4 HB, Elbow 787198 QC x 1/2 HB, Elbow 50° 787199 QC x 3/8 HB, Straight 791569 QC x 1/2 HB, Straight ...

7 Unpack and inspect parts  If you have damaged components: Contact the freight company that delivered the unit to report the damage. Then, contact NorthStar Product Support at 1-800-270-0810.  If you have missing components: Contact NorthStar Product Support at 1-800-270-0810. Regulator 791443 Grommet 784519 Screw (4) 791504 QC Clip 788429 Pressure Gauge 791465 Pump Mounting Plate (for 2287181, 2287182, 2681852) 791457 QC x 3/8 HB, Elbow 787196 QC x 3/4 HB, Elbow 787198 QC x 1/2 HB, Elbow 50° 787199 QC x 3/8 HB, Straight 791569 QC x 1/2 HB, Straight ...

Outlet……………………………………………… Quick connect, ¾" female Bypass……………………………………………... Quick connect, ¾" female Gauge (2)…………………………………………... NPT, ¼" female Maximum pressure…………………………………….. 100 psi (7 bar) Maximum flow………………………………………….7.0 GPM (27 LPM) Maximum fluid temperature…………………………… 120°F (50°C) Component ...

13 Step Seven: Install rubber grommet (784519) into hole in tank  Apply soap to rubber grommet.  Press grommet into the 9/16" hole in the sprayer tank. Ensure the bottom lip of the grommet is fully through the hole, and the top lip is flush with the top of the tank. Step Eight: Reinstall pump onto sprayer  Apply soap to bypass fitting on regulator.  Press bypass fitting into the grommet.  Reinstall four screws through pump feet and into threaded holes in the tank. Step Nine: Reinstall hoses  Install fitting on inlet hose ...

16 Step One: Disconnect pump from power supply Step Two: Disconnect inlet and outlet fittings from pump  Slide red QC clips open on the inlet and outlet ports of the pump.  Pull inlet and outlet fittings out of the pump.  Loosen hose clamp on outlet hose and broadcast hoses and remove both hoses from outlet fittings.  Do not disconnect inlet hose from inlet fitting. Step Three: Remove pump from sprayer  Remove four screws from pump mounting feet.  Remove pump from sprayer. Step Four: Assemble fittings to regulator  Remove steel clips ...

7 Unpack and inspect parts  If you have damaged components: Contact the freight company that delivered the unit to report the damage. Then, contact NorthStar Product Support at 1-800-270-0810.  If you have missing components: Contact NorthStar Product Support at 1-800-270-0810. Regulator 791443 Grommet 784519 Screw (4) 791504 QC Clip 788429 Pressure Gauge 791465 Pump Mounting Plate (for 2287181, 2287182, 2681852) 791457 QC x 3/8 HB, Elbow 787196 QC x 3/4 HB, Elbow 787198 QC x 1/2 HB, Elbow 50° 787199 QC x 3/8 HB, Straight 791569 QC x 1/2 HB, Straight ...