MEIG SLM758 Hardware Design Manual

SLM758 Hardware Design Guide Page 20 GPIOand default function GPIO0_SPI_MOSI 261 O The default configuration is the SPI interface GPIO1_SPI_MISO 260 O GPIO2_SPI1_CS 259 I GPIO3_SPI1_CLK 258 O GPIO8 232 I/O Generic GPIO, without default configuration GPIO9 231 I/O Generic GPIO, without default configuration GPIO33 166 I/O Generic GPIO, without default configuration GPIO35 167 I/O Generic GPIO, without default conf ...

SLM758 Hardware Design Guide Page 11 13MP Camera at the same time Video decode 4K 30fps, 1080p 60fps, H.264/H.265 MP4/ WMV9/ VC1/ DivX/ VP8/VP9 Video encode 4K 30fps,1080p 60 fps: H.264/ H.265/ MP4/ VP8 1080P 60fps De +1080p 30fps En Input Device Key（Power on/off, Home, Volume+, Volume-） Capacitive TP Reset Support HW reset Application interface Interface name Main function description VBAT 3pin，Power input ...

SLM758 Hardware Design Guide Page 6 6. Electrical, Reliability ............................................................................................................................................. 67 6.1 Absolute Maximum ...................................................................................................................................... 67 6.2 Working Temperature.......................... ...

SLM758 Hardware Design Guide Page 27 173 USB3_SS_RX_M AI USB super-speed receive – minus 174 USB3_SS_RX_P AI USB super-speed receive – plus 175 GND GND GND 176 GPIO20_UART6_TX GPIO_20 B-PD:nppukp Configurable I/O,UART6 TX 177 GPIO21_UART6_RX GPIO_21* B-PD:nppukp Configurable I/O,UART6 RX 178 Reserved Reserved 179 Reserved Reserved 180 GND GND GND 181 GND GND GND 182 CHG_LED AO Current sink for charging indica ...