KoamTac SKXPro Manual 

T: + 1-609-256-4700 F: +1-609-228-4373 [email protected] www.koamtac.com QG_SKXPro_SKX5_20210809 p0 SKXPro/SKX5 Quick Guide

Visit store.koamtac.com to purchase additional SKXPro/SKX5 and accessories. QG_SKXPro_SKX5_20210809 p1 Contents Product Introduction ............................................................................................................................................. 2 1.1 SKXPro/SKX5 Diagram .................................................................................................................................. 2 1.2 How to Turn On and Off ................................................................................................................................ 3 1.3 Power Hibernation Mode (SKX5 Only) ......................................................................................................... 3 Connectivity ........................................................................................................................................................... 4 2.1 Connection Between the XCover Pro/5 and the SKXPro/SKX5 ................................................................. 4 2.2 Connection Between XCover Pro/5 and PC ................................................................................................ 4 Usage ...................................................................................................................................................................... 6 3.1 Using Keyboard Wedge (HID Keyboard): USB HID Mode (DEFAULT) ...................................................... 6 3.2 Using KTSync SKXPro/SKX5: USB Serial Mode ........................................................................................... 6 3.3 Using SKX Keyboard – Android .................................................................................................................... 8 3.4 Using Other Developed Applications with SDK – Android ...................................................................... 10 SKXPro/SKX5 Demo: Scan & Search .................................................................................................................. 11 4.1 Purpose ......................................................................................................................................................... 11 4.2 How to Test .................................................................................................................................................. 11 4.3 Sample Barcodes for Demo Testing .......................................................................................................... 18 Product Specifications (SKXPro) ......................................................................................................................... 19 Product Specifications (SKX5) ............................................................................................................................. 21 Charging Accessories and Companions ............................................................................................................ 23 7.1 Charging Accessories .................................................................................................................................. 23 7.2 Companions ................................................................................................................................................. 24

Visit store.koamtac.com to purchase additional SKXPro/SKX5 and accessories. QG_SKXPro_SKX5_20210809 p2 Product Introduction The SKXPro/SKX5 is a 2D Imager Barcode Data Scanning Sled for the Samsung Galaxy XCover Pro/5. It is connected to the XCover Pro/5 via the USB Type-C port at the bottom of the SKXPro/SKX5. Data between the SKXPro/SKX5 and XCover Pro/5 is transferred through this physical connection, not by Bluetooth. 1.1 SKXPro/SKX5 Diagram ① Left & Right SCAN Keys (for SKXPro/SKX5) ② VOLUME UP Key (access to XCover Pro/5 Volume Key) ③ VOLUME DOWN Key (access to XCover Pro/5 Volume Key) ④ SIDE Key (of XCover Pro/5) ⑤ XCover Key (access to XCover Pro/5 XCover Key) ⑥ Top Key (access to XCover Pro Top Key) ⑦ Hand Strap Holes (for SKXPro/SKX5) ⑧ USB Port to access XCover Pro/5 or SKXPro/SKX5 from PC ⑨ Barcode Scan Window (for SKXPro/SKX5) ⑩ Pogo Pins for Charging XCover Pro/5 and SKXPro/SKX5 ⑪ Screw Holes (for SKXPro/SKX5)

Visit store.koamtac.com to purchase additional SKXPro/SKX5 and accessories. QG_SKXPro_SKX5_20210809 p3 1.2 How to Turn On and Off Refer to the figure in section 1.1 to locate the buttons and keys. The SKXPro/SKX5 does not have its own internal battery but rather draws power from the XCover Pro/5’s battery. The SKXPro/SKX5 works only when the XCover Pro/5 is mounted into SKXPro/SKX5 Scanning Sled. If you need to access the SKXPro/SKX5 or the XCover Pro/5, you can access them by using the USB port from the back of the SKXPro/SKX5. To turn on the XCover Pro/5, press and hold the SIDE key for a few seconds. To turn off the XCover Pro/5, press and hold the VOLUME DOWN and SIDE keys simultaneously. Alternatively, open the notification panel and tap power icon. 1.3 Power Hibernation Mode (SKX5 Only) To save the battery of the phone, you can turn off the SKX5 sled when you are using the sled actively. (hibernation mode) Press and hold the left and the right SCAN buttons at the same time for 3 seconds and you will hear the beep sound. Then the sled now turns off. To use the sled again, follow the same direction. That is, press and hold the left and the right SCAN buttons at the same time for 3 seconds and you will hear the beep sound. Then the sled now turns back on.

Visit store.koamtac.com to purchase additional SKXPro/SKX5 and accessories. QG_SKXPro_SKX5_20210809 p4 Connectivity 2.1 Connection Between the XCover Pro/5 and the SKXPro/SKX5 Once the XCover Pro/5 is assembled with the SKXPro/SKX5, the two will be connected via USB and the connectivity will be USB HID connectivity by default. This allows the SKXPro/SKX5 to function as a keyboard. The SKXPro/SKX5 is also able to utilize USB Serial connectivity. a. USB HID Connectivity: Allows one-way USB communication. The SKXPro/SKX5 only transmits data to the host device, the XCover Pro/5. b. USB Serial Connectivity: Allows two-way USB communication. The SKXPro/SKX5 transmits data to the XCover Pro/5 application and the XCover Pro/5 application can transmit data/control back to the SKXPro/SKX5. Note: USB HID inputs data directly into an application, while USB Serial requires KTSync SKXPro/SKX5 or a custom application developed using the KOAMTAC SDK to input data into an application. To gain access to the SDK, please complete the form here: https://www.koamtac.com/sdk/ 2.2 Connection Between XCover Pro/5 and PC To access the XCover Pro/5 while installed in the SKXPro/SKX5 sled, you can use the USB port located on the back of SKXPro/SKX5. (Item ⑧ from the diagram in section 1.1) Please connect the SKXPro/SKX5 sled to the PC with a USB cable, then scan the barcode shown below to bypass the SKXPro/SKX5. Once you disconnect the USB cable from the PC, the XCover Pro/5 will automatically reconnect to the SKXPro/SKX5. Phone to PC Connection