Klein Tools 93PLL Instruction Manual

ENGLISH • THREE ORTHOGONAL 360° PLANAR LINES THREE ORTHOGONAL PLANAR LINES IP54 93PLL www.GlobalTestSupply.com Find Quality Products Online at: [email protected]

deliver three orthogonal 360° planar lines in the X, Y, and Z planes. • Operating Altitude: 6562 ft. (2000 m) • Relative Humidity: <80% non-condensing • Operating Temp: 20°F to 120°F (-10°C to 50°C) • Storage Temp: -5°F to 140°F (-20°C to 60°C) • Lasers: • 510-530 nm • ≤1mW each beam, Class 2 Laser Product • Accuracy: +/- 4.5 mm per 15 m • Battery Type: Removable Li-Ion, 3.7V 10400 mAH • Battery Life: 9+ Hours (with all three lasers active) • Dimensions: 5.5" x 4.75" x 3.5" (140 x 120 x 88 mm) • Weight: 22.6 oz. (640 g) without battery • Calibration: Accurate for one year • Standards: Conforms to: EN61326-1:2013, EN60825-1:2014. Conforms to NOM-001-SCFI-2018 Electronic Devices: Safety Requirements and Test Methods, based on NMX-I-60950-1-NYCE-2015 Information Technology Equipment - General Requirements. Complies with: 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007. • Ingress Protection: IP54 Dust & Water Resistant • Electromagnetic Environment: IEC EN61326-1:2013. This equipment meets requirements for use in basic and controlled electromagnetic environments like residential properties, business premises, and light-industrial locations. Specifications subject to change. ENGLISH www.GlobalTestSupply.com Find Quality Products Online at: [email protected]

Failure to observe these warnings can result in serious personal injury, fire, or electrical shock. Retain these instructions for future reference. WARNING: LASER RADIATION. DO NOT STARE INTO BEAM. Class 2 Laser. Warning label on side Warning label on bottom Battery specifications label IP54 MMYYFF-HS Input: 5V 2A Model No. 93PLL www.kleintools.com Planar Laser Level CLASS II LASER PRODUCT LASER RADIATION: DO NOT STARE INTO BEAM Max. Output ≤1mW Wavelength: 510-530nm EN60825-1:2014 Complies with 21 CFR, PART1040 29026 Li-ion battery 1ICR19/65-4 MMYYFF-HS WARNING: Do not incinerate Input: 5V 2.0A Capacity: 10400mAh (38.48Wh) 3.7V www.GlobalTestSupply.com Find Quality Products Online at: [email protected]

A. B. WIRE: 24 AWG WITH PVC INSULATION. C. COLOR: 2. PLASTIC HOUSING AND WIRE: . A. METAL: BRIGHT SILVER. B. TIE WIRE: . C. INSPECT ALL VISIBLE COLORS. D. SPECIFICATIONS: WEIGHT:TBD A. B. C. D. E. SUPPORT CHARGING VOLTAGE: 5 0.25V. F. G. H. 4. PROCESSES. REV ECO DESCRIPTION 1 FIRST RELEASE DRAWING NO. .0005 FRAC. ANG. UNLESS OTHERWISE SPECIFIED NAME: 1/64 .010 .005 .000 TOLERANCES .0 .020 450 Lin 600 NUMBER OF CRITICAL DIMENSIONS CRITICAL DIMENSION DESIGNATION INSPECTION ALL CRITICAL ITEMS CRITICAL TO Q TO BE INSPECTED TO STANDARD UNLESS OTHERWISE SPECIFIED BILL O SIZE: UNLESS OTHERWISE SPECIFIED A W DR: CH: .5° .00 .0000 SCALE: 1 N/A NOTES: SYMBOLS ON INSTRUMENT WARNINGS • Exposing eyes to laser radiation can result in severe and permanent eye injuries. NEVER look directly into the laser beam emitted by this instrument. • Do not use the instrument if it appears to be damaged. • Do not modify the instrument in any way, as to do so could result in emission of hazardous laser radiation than could result in severe eye injuries. • Do not use optical equipment such as lenses, prisms, optical scopes, etc. to transmit, retransmit, or view the laser beam as this could result in severe eye injuries. • This product should not be used by untrained operators or operators who have not read and fully understood the instructions. • This product should not be used in any location that could result in somebody looking at or having their eyes inadvertently irradiated by the laser beam as this could result in severe eye injuries. • The instrument should be powered off following use to minimize the risks of inadvertently exposure to hazardous laser radiation that could result in severe eye injuries. • Do not remove warning labels from this instrument as this could result in serious personal injury and increases the risk of exposure to hazardous laser irradiation. • The instrument should be securely located in a tidy work environment prior to operation as unexpected drops or movement of the instrument may result in damage to the instrument and increases the risk of inadvertent exposure to laser radiation that could result in severe eye injuries. • This instrument is IP54 dust & water resistant. Following any contact with water, thoroughly dry the instrument with a dry, lint-free cloth. • There are no user serviceable parts in this instrument. X-Plane Laser Input: DC 5V, 1.5A Output: 3.7V 10400 mAh 38.5Wh IP54 MMYYFF-HS Ingress Protection IP54 Rating - Dust & Water Resistant Y-Plane Laser Hazardous laser radiation, DO NOT stare into beam or view direct- ly with optical instruments Z-Plane Laser Warning or Caution Input: DC 5V, 1.5A Output: 3.7V 10400 mAh 38.5Wh 4 MMYYFF-HS 4 Input: DC 5V, 1.5A Output: 3.7V 10400 mAh 38.5Wh IP54 MMYYFF-HS NOM-NYCE Out-Of-Level Indicator Input: DC 5V, 1.5A Output: 3.7V 10400 mAh 38.5Wh IP54 MMYYFF-HS Warning – Risk of electric shock Input: DC 5V, 1.5A Output: 3.7V 10400 mAh 38.5Wh IP54 WEEE – Battery disposal mAh 38.5Wh IP54 MYYFF-HS Read instructions Input: DC 5V, 1.5A Output: 3.7V 10400 mAh 38.5Wh IP54 MMYYFF-HS MMYYFF-HS Conformité Européenne: Conforms with European Economic Area directives A 0 mAh 38.5Wh IP54 MYYFF-HS MYYFF-HS Recycle Input: DC 5V, 1.5A Output: 3.7V 10400 mAh 38.5Wh IP54 MMYYFF-HS MMYYFF-HS Conforms with BCS regulations of California Energy Commission IP54 MMYYFF-HS Input: 5V 2A UKCA - United Kingdom Conformity Assessment www.GlobalTestSupply.com Find Quality Products Online at: [email protected]

A. B. WIRE: 24 AWG WITH PVC INSULATION. C. COLOR: 2. PLASTIC HOUSING AND WIRE: . A. METAL: BRIGHT SILVER. B. TIE WIRE: . C. INSPECT ALL VISIBLE COLORS. D. SPECIFICATIONS: WEIGHT:TBD A. B. C. D. E. SUPPORT CHARGING VOLTAGE: 5 0.25V. F. G. H. 4. PROCESSES. REV ECO DESCRIPTION CH AP DATE 1 FIRST RELEASE WZB 10/24/201 9 DRAWING NO. .0005 FRAC. ANG. UNLESS OTHERWISE SPECIFIED NAME: 1/64 .010 .005 .000 TOLERANCES DRAWING NO. .0 .020 450 Bond St. Lincolnshire, IL. 60069 REV NUMBER OF CRITICAL DIMENSIONS CRITICAL DIMENSION DESIGNATION INSPECTION ALL CRITICAL ITEMS CRITICAL TO Q TO BE INSPECTED TO STANDARD UNLESS OTHERWISE SPECIFIED BILL OF MATERIALS 9/24/19 SHEET: SIZE: UNLESS OTHERWISE SPECIFIED A WZB DR: CH: AP: DATE: .5° .00 .0000 SCALE: 1 1 OF 1 1 N/A NOTES: 13 1. X-Plane Line On/Off Button 10. Power/Pendulum Lock/Unlock Switch 2. Y-Plane Line On/Off Button 11. Bracket 1/4-20 Tripod Mount 3. Z-Plane Line On/Off Button 12. Battery Door 4. Excessive Tilt Indicator 13. USB-C Charging Cable 5. Battery Level Indicator 14. Magnets 6. USB-C Charge-In Port 15. 1/4-20 Mounting Screw 7. X-Plane Aperture 16. Li-Ion Battery Charge-In Port 8. Y-Plane Aperture 17. Li-Ion Battery Charge Indicator LED 9. Z-Plane Aperture FEATURE DETAILS NOTE: No user-serviceable parts inside. 7 8 10 9 6 4 1 2 5 3 TOP SIDE FRONT BOTTOM BOTTOM 11 12 BATTERY 16 14 17 Input: DC 5V, 1.5A Output: 3.7V 10400 mAh 38.5Wh MMYYFF-HS Input: DC 5V, 1.5A Output: 3.7V 10400 mAh 38.5Wh IP54 MMYYFF-HS 4 , 1.5A t: 0400 mAh 38.5Wh IP54 P54 SS P54 MMYYFF-HS put: 2A www.GlobalTestSupply.com Find Quality Products Online at: [email protected]