Lenovo ThinkCentre TIO24Gen3 Operation & User’s Manual

Adjusting your monitor image This section describes the user control features used to adjust your monitor image. Using the user controls Your monitor has four user controls on the front panel. To locate the user controls, see "Locating connectors and controls on your monitor"on page 1-3. You can use the user controls to adjust some settings of your monitor on the On Screen Display (OSD) main menu. • Back button Used to move back and exit from the OSD menu. • Left shift button / Mode-switching button Used to move to the left on the OSD menu and switch between the AIO m ...

Understanding power management Power management is invoked when the computer recognizes that you have not using your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table 2-3. Power indicator State Power Indicator Screen Restoring Operation Compliance On Solid green (AIO Mode/DP) Normal Standby/ Suspend Blinking green (AIO Mode) Note: If Tiny is in sleep, the LE ...

Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft Windows 7 and Microsoft Windows 10. Installing the monitor driver in Windows 7 To use the Plug and Play feature in Microsoft Windows 7, do the following: Note: You must download file from the Reference and Driver CD to use the Plug and Play feature in Windows 7. 1. Turn off the computer, all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 7 operating sys ...

Selecting a supported display mode The display mode that monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free. Note: If your system has previously been used with a CRT monitor and is c ...