Dell PowerVault MD3060e Getting Started Manual
Text of the manual
Dell PowerVault MD3260/3260i/3660i/3660f/3060e
Storage Arrays
Getting Started Guide
Regulatory Model: E08J Series
Regulatory Type: E08J001
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2012 Dell Inc.
Trademar
Installation and Configuration
WARNING: Before performing the following procedure, review the safety instructions that came with the system.
Unpacking A Rack System
WARNING: The weight of your system without the physical disks installed (empty weight) is 19.50 kg (43.0 lb) and
when fully populated with all the physical disks is 105.20 kg (232.0 lb).
WARNING:
Opening And Closing The Disk Drawer
Figure 2. Opening and Closing the Disk Drawer
Open the disk drawer to install or remove the physical disk carrier(s).
NOTE: You can open only one disk drawer at a time.
Installing The Physical Disks
Figure 3. Installing the Physical Disk(s)
Install physical disk(s) in the disk drawer.
NOTE: Each disk drawer must have a min
Connecting The Power Cable(s)
Figure 4. Connecting the Power Cable(s)
Connect the system’s power cable(s) to the system.
Securing The Power Cable(s)
Figure 5. Securing the Power Cable(s)
Open the cable retention bracket by pulling the tabs on its sides, insert the cable, and secure the system power cable,
as shown in the illustration.
Plug the other end of
