Axis M3205-LVE Installation Manual
Text of the manual
AXIS M32-LVE Network Camera Series
AXIS M3205-LVE Network Camera
AXIS M3206-LVE Network Camera
Installation Guide
Read this first
Read through this Installation Guide carefully before
installing the product. Keep the Installation Guide
for future reference.
Legal considerations
Video surveillance can be regulated by laws that vary
from country to country. Check the laws in your
local region before using this product for surveillance
purposes.
This product includes the following licences:
•
one (1) H.264 decoder license
•
one (1) MPEG-4 Part 2 decoder license
To purchase further licenses, contact your reseller.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of
any inaccuracies or omissions. Axis Communications
AB cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty
of any kind with regard to the material contained
within this document, including, but not limited to,
the implied warranties of merchantability and fitness
for a particular purpose. Axis Communications AB
shall not be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Intellectual property rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in
this document. In particular, and without limitation,
these intellectual property rights may include one or
more of the patents listed at axis.com/patent and
one or more additional patents or pending patent
applications in the US and other countries.
This product contains licensed third-party software.
See the menu item “About” in the product’s user
interface for more information.
This product contains source code copyright
Apple Computer, Inc., under the terms
of Apple Public Source License 2.0 (see
opensource.apple.com/apsl). The source code is
available from developer.apple.com/bonjour/
Equipment modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthorized
equipment changes or modifications will invalidate
all applicable regulatory certifications and approvals.
Trademark acknowledgements
AXIS COMMUNICATIONS, AXIS and VAPIX are
registered trademarks or trademark applications of
Axis AB in various jurisdictions. All other company
names and products are trademarks or registered
trademarks of their respective companies.
Apple, Apache, Bonjour, Ethernet, Internet Explorer,
Linux, Microsoft, Mozilla, Real, SMPTE, QuickTime,
UNIX, Windows, and WWW are registered trademarks
of the respective holders. Java and all Java-based
trademarks and logos are trademarks or registered
trademarks of Oracle and/or its affiliates. The UPnP
Word Mark and UPnP Logo are trademarks of Open
Connectivity Foundation, Inc. in the United States
or other countries.
microSD, microSDHC, and
microSDXC Logos are trademarks of SD-3C LLC.
microSD, microSDHC, microSDXC are trademarks or
registered trademarks of SD-3C, LLC in the United
States, other countries or both.
Regulatory information
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
•
Electromagnetic Compatibility (EMC) Directive
2014/30/EU. See Electromagnetic compatibility
(EMC) on page 2 .
•
Low Voltage Directive (LVD) 2014/35/EU. See
Safety on page 3 .
•
Restriction of Hazardous Substances
(RoHS) Directive 2011/65/EU, including any
amendments, updates or replacements. See
Disposal and recycling on page 3 .
A copy of the original declaration of conformity
may be obtained from Axis Communications AB. See
Contact information on page 4 .
Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
•
Radio frequency emission when installed
according to the instructions and used in its
intended environment.
•
Immunity to electrical and electromagnetic
phenomena when installed according to
the instructions and used in its intended
environment.
USA
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.
This device may not cause harmful interference,
and
2.
this device must accept any interference
received, including interference that may cause
undesired operation.
This equipment has been tested using a shielded
network cable (STP) and found to comply with the
limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.The product shall be
connected using a shielded network cable (STP) that
is properly grounded.
Contact information
Axis Communications Inc.
300 Apollo Drive
Chelmsford, MA 01824
United States of America
Tel: +1 978 614 2000
Canada
This digital apparatus complies with
CAN ICES-3 (Class A). The product shall be
connected using a shielded network cable (STP)
that is properly grounded. Cet appareil numérique
est conforme à la norme CAN NMB-3 (classe A). Le
produit doit être connecté à l'aide d'un câble réseau
blindé (STP) qui est correctement mis à la terre.
Europe
This digital equipment fulfills the requirements for RF
emission according to the Class A limit of EN 55032.
The product shall be connected using a shielded
network cable (STP) that is properly grounded. Notice!
This is a Class A product. In a domestic environment
this product may cause RF interference, in which case
the user may be required to take adequate measures.
Australia/New Zealand
This digital equipment fulfills the requirements
for RF emission according to the Class A limit of
AS/NZS CISPR 32. The product shall be connected
using a shielded network cable (STP) that is properly
grounded. Notice! This is a Class A product. In a
domestic environment this product may cause RF
interference, in which case the user may be required
to take adequate measures.
Japan
この装置は、クラスA機器です。この装置を
住宅環境で使⽤すると電波妨害を引き起こす
ことがあります。この場合には使⽤者が適切
な対策を講ずるよう要求されることがあり
ます。VCCI ‒ A
本製品は、シールドネットワークケーブル
(STP)を使⽤して接続してください。また適切
に接地してください。
Korea
이기기는업무용환경에서사용할목적으로
적합성평가를받은기기로서가정용환경에서
사용하는경우전파간섭의우려가있습니다.
적절히접지된STP (shielded twisted pair) 케
이블을사용하여제품을연결하십시오.
Safety
This product complies with IEC/EN/UL 62368-1,
safety of audio/video and IT equipment, and
IEC/EN/UL 60950-22, Safety of Information
Technology Equipment.
When used with Power over Ethernet (PoE), the Power
Sourcing Equipment (PSE) shall comply with IEEE
802.3af and Limited Power Source (LPS) according
to clause 2.5 of IEC/EN/UL 60950-1 or annex Q of
IEC/EN/UL 62368-1.
We recommend the use of Axis midspans or Axis PoE
switches.
Disposal and recycling
When this product has reached the end of its
useful life, dispose of it according to local laws
and regulations. For information about your
nearest designated collection point, contact your
local authority responsible for waste disposal. In
accordance with local legislation, penalties may be
applicable for incorrect disposal of this waste.
Europe
This symbol means that the product shall
not be disposed of together with household or
commercial waste. Directive 2012/19/EU on waste
electrical and electronic equipment (WEEE) is
applicable in the European Union member states.
To prevent potential harm to human health and the
environment, the product must be disposed of in an
approved and environmentally safe recycling process.
For information about your nearest designated
collection point, contact your local authority
responsible for waste disposal. Businesses should
contact the product supplier for information about
how to dispose of this product correctly.
This product complies with the requirements of
Directive 2011/65/EU on the restriction of the use
of certain hazardous substances in electrical and
electronic equipment (RoHS).
China
This product complies with the requirements
of SJ/T 11364-2014, Marking for the restriction of
hazardous substances in electrical and electronic
products.
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
axis.com
Warranty information
For information about Axis’ product warranty and
thereto related information, go to axis.com/warranty
Support
Should you require any technical assistance, please
contact your Axis reseller. If your questions cannot
be answered immediately, your reseller will forward
your queries through the appropriate channels to
ensure a rapid response. If you are connected to the
Internet, you can:
•
download user documentation and software
updates
•
find answers to resolved problems in the FAQ
database, search by product, category, or phrase
•
report problems to Axis support staff by logging
in to your private support area
•
chat with Axis support staff
•
visit Axis Support at axis.com/support
Learn more!
Visit Axis learning center axis.com/academy for
useful trainings, webinars, tutorials and guides.
The Axis product shall be used in compliance
with local laws and regulations.
•
Store the Axis product in a dry and ventilated
environment.
•
Avoid exposing the Axis product to shocks or
heavy pressure.
•
Do not install the product on unstable poles,
brackets, surfaces or walls.
•
Use only applicable tools when installing the Axis
product. Using excessive force with power tools
could cause damage to the product.
•
Do not use chemicals, caustic agents, or aerosol
cleaners.
•
Use a clean cloth dampened with pure water for
cleaning.
•
Use only accessories that comply with the
technical specification of your product. These
can be provided by Axis or a third party. Axis
recommends using Axis power source equipment
compatible with your product.
•
Use only spare parts provided by or recommended
by Axis.
•
Do not attempt to repair the product yourself.
Contact Axis support or your Axis reseller for
service matters.
Transportation
NO
NO
NOTICE
TICE
TICE
•
When transporting the Axis product, use the
original packaging or equivalent to prevent
damage to the product.
Battery
Low battery power affects the operation of the RTC,
causing it to reset at every power-up. When the
battery needs replacing, a log message will appear
in the product’s server report. For more information
about the server report, see the product´s web page
or contact Axis support.
Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.
WARNING
•
Risk of explosion if the battery is incorrectly
replaced.
•
The battery should be replaced with an identical
battery only.
•
Used batteries should be disposed of according
to local regulations or the battery manufacturer's
instructions.
Dome cover
NO
NO
NOTICE
TICE
TICE
•
Be careful not to scratch, damage or leave
fingerprints on the dome cover because this
could decrease image quality. If possible, keep
the protective plastic on the dome cover until
the installation is complete.
•
Do not clean a dome cover that looks clean to
the eye and never polish the surface. Excessive
cleaning could damage the surface.
•
For general cleaning of the dome cover it is
recommended to use a non-abrasive, solvent-free
neutral soap or detergent mixed with pure water
and a soft, clean cloth. Rinse well with pure
lukewarm water. Dry with a soft, clean cloth to
prevent water spotting.
•
Never use harsh detergents, gasoline, benzene,
acetone, or similar chemicals.
•
Avoid cleaning the dome cover in direct sunlight
or at elevated temperatures.
•
Domes for L products come with an anti-scratch
surface. Avoid leaving finger prints on the dome
surface since this might impair image quality.
Français
Consignes de sécurité
AAAVIS
VIS
VIS
•
Le produit Axis doit être utilisé conformément
aux lois et réglementations locales.
•
Conserver ce produit Axis dans un environnement
sec et ventilé.
•
Ne pas exposer ce produit Axis aux chocs ou aux
fortes pressions.
•
Ne pas installer ce produit sur des poteaux,
supports, surfaces ou murs instables.
•
Utiliser uniquement des outils recommandés
pour l'installation de l'appareil Axis. L'application
d'une force excessive sur l'appareil avec des
outils puissants pourrait l'endommager.
•
Ne pas utiliser de produits chimiques, de
substances caustiques ou de nettoyants
pressurisés.
•
Utiliser un chiffon propre imbibé d'eau pure pour
le nettoyage.
•
Utiliser uniquement des accessoires conformes
aux caractéristiques techniques de votre produit.
Ils peuvent être fournis par Axis ou un tiers.
Axis recommande d'utiliser un équipement
d'alimentation Axis compatible avec votre
produit.
•
Utiliser uniquement les pièces de rechange
fournies ou recommandées par Axis.
•
Ne pas essayer de réparer vous-même ce produit.
Contacter l'assistance technique d'Axis ou
votre revendeur Axis pour des problèmes liés à
l'entretien.
Lors du transport du produit Axis, utilisez
l'emballage d'origine ou un équivalent pour éviter
d'endommager le produit.
Batterie
Si la batterie est faible, le fonctionnement de
l'horloge en temps réel peut être affecté et entraîner
sa réinitialisation à chaque mise sous tension. Un
message enregistré apparaît dans le rapport de
serveur du produit lorsque la batterie doit être
remplacée. Pour plus d'informations sur le rapport
serveur, consultez la page Web du produit ou
contactez l'assistance technique d'Axis.
Les piles boutons 3,0 V au lithium contiennent du
1,2-diméthoxyéthane, éthylène glycol diméthyl éther
(EGDME), CAS n° 110-71-4.
AVERTISSEMENT
•
Risque d'explosion si la batterie est remplacée de
façon incorrecte.
•
La batterie doit être remplacée par une batterie
identique uniquement.
•
Les batteries usagées doivent être mises au rebut
conformément aux réglementations locales ou
aux instructions du fabricant de la batterie.
Couvercle de dôme
AAAVIS
VIS
VIS
•
Veillez à ne pas rayer, endommager ou laisser
d'empreintes sur le couvercle du dôme car cela
pourrait altérer la qualité d'image. Laissez,
si possible, la protection en plastique sur le
couvercle du dôme jusqu’à la fin de l’installation.
•
Ne nettoyez pas le couvercle du dôme s'il semble
propre à l'œil nu et ne frottez jamais sa surface.
Un nettoyage excessif pourrait endommager la
surface.
•
Pour le nettoyage général du couvercle du
dôme, il est recommandé d'utiliser un produit
non abrasif, un savon neutre sans solvant ou
un détergent mélangé avec de l'eau pure et un
chiffon doux propre. Rincez bien à l'eau tiède
pure. Séchez avec un chiffon doux et propre pour
éviter les tâches d'eau.
•
N'utilisez jamais de détergents agressifs,
d'essence, de benzène, d'acétone ou autres
produits chimiques similaires.
•
Évitez de nettoyer le couvercle du dôme dans
la lumière directe du soleil ou lorsque les
températures sont élevées.
•
Les dômes des produits L sont livrés avec une
surface anti-rayures. Évitez de laisser des
empreintes digitales sur la surface du dôme car
cela pourrait altérer la qualité de l'image.
Deutsch
Sicherheitsanweisungen
HINWEIS
HINWEIS
HINWEIS
•
Das Axis-Produkt muss unter Beachtung der
geltenden Gesetze und Bestimmungen betrieben
werden.
•
Lagern Sie das Axis Produkt in einer trockenen
und belüfteten Umgebung.
•
Das Axis-Produkt weder Stößen noch starkem
Druck aussetzen.
•
Das Produkt nicht an instabilen Masten,
Halterungen, Oberflächen oder Wänden
anbringen.
•
Verwenden Sie bei der Installation des Axis
Produkts ausschließlich passende Werkzeuge.
Ein zu großer Kraftaufwand mit elektrischen
Werkzeugen kann das Produkt beschädigen.
•
Verwenden Sie keine chemischen, ätzenden oder
aerosolhaltigen Reinigungsmittel.
•
Verwenden Sie zum Reinigen ein sauberes, mit
destilliertem Wasser angefeuchtetes Tuch.
•
Verwenden Sie nur Zubehör, das den technischen
Vorgaben Ihres Produkts entspricht. Dieses ist
von Axis oder Drittanbietern erhältlich. Axis
empfiehlt die mit Ihrem Produkt kompatible
Stromversorgung von Axis.
•
Verwenden Sie ausschließlich Ersatzteile die von
Axis angeboten oder empfohlen werden.
•
Versuchen Sie nicht, dieses Produkt selbsttätig zu
reparieren. Wenden Sie sich bezüglich Reparatur
und Wartung an den Axis Support oder Ihren
Axis Händler.
Transport
HINWEIS
HINWEIS
HINWEIS
•
Bei Bedarf transportieren Sie das Axis
Produkt in der Originalverpackung oder einer
entsprechenden Verpackung, so dass Schäden
vermieden werden.
Batterie
Eine nicht ausreichend geladene Batterie
beeinträchtigt den Betrieb der Echtzeituhr, die dann
bei jedem Systemstart zurückgesetzt wird. Sie
erhalten eine Protokollnachricht im Serverbericht des
Produkts, wenn ein Batteriewechsel erforderlich ist.
Weitere Informationen zum Serverbericht finden Sie
auf den Webseiten des Produkts, oder wenden Sie
sich an den Axis-Support.
Lithium-Knopfzellen (3,0 V) enthalten
1,2-Dimethoxyethan; Ethylenglycoldimethylether
(EGDME), CAS-Nr. 110-71-4.
WARNUNG
•
Explosionsgefahr bei fehlerhaftem
Batteriewechsel.
•
Die Batterie darf nur durch eine identische
Batterie ersetzt werden.
Verbrauchte Batterien gemäß den örtlichen
Vorschriften oder den Anweisungen des
Herstellers entsorgen.
Kuppelabdeckung
HINWEIS
HINWEIS
HINWEIS
•
Achten Sie darauf, die Kuppelabdeckung weder
zu zerkratzen, zu beschädigen oder darauf
Fingerabdrücke zu hinterlassen, da dies die
Bildqualität beeinträchtigen kann. Falls möglich
entfernen Sie die Schutzfolie erst nachdem die
Installation abgeschlossen ist.
•
Säubern Sie die Kuppelabdeckung nicht, wenn
diese sauber erscheint, und polieren Sie niemals
die Oberfläche. Zu häufiges Säubern kann die
Oberfläche beschädigen.
•
Für die normale Reinigung der Kuppelabdeckung
werden eine nicht-scheuernde, lösungsmittelfreie
neutrale Seife oder ein entsprechendes
Reinigungsmittel mit destilliertem Wasser und ein
sauberer, weicher Lappen empfohlen. Spülen Sie
die Kuppelabdeckung gründlich mit lauwarmem
destilliertem Wasser ab. Um Wasserflecken zu
vermeiden, die Kuppelabdeckung mit einem
weichen, sauberen Lappen reinigen.
•
Keine aggressiven Reinigungsmittel,
Waschbenzin, Benzol, Aceton oder ähnliche
Chemikalien verwenden.
•
Die Kuppelabdeckung nicht in direktem
Sonnenlicht oder bei erhöhten Temperaturen
säubern.
•
Kuppeln für L-Produkte werden mit kratzfester
Oberfläche geliefert. Fingerabdrücke auf der
Kuppeloberfläche können die Bildqualität
beeinträchtigen.
Italiano
Informazioni di sicurezza
AAAVVISO
VVISO
VVISO
•
Il dispositivo Axis deve essere utilizzato in
conformità alle leggi e alle normative locali.
•
Conservare il dispositivo Axis in un ambiente
asciutto e ventilato.
•
Evitare di esporre il dispositivo Axis a urti o
pressioni eccessive.
•
Non installare il dispositivo su supporti, superfici,
pareti o pali instabili.
•
Utilizzare solo strumenti applicabili quando si
installa il dispositivo Axis. Se si utilizza una forza
eccessiva con strumenti non adatti è possibile
causare danni al dispositivo.
•
Non utilizzare sostanze chimiche, agenti caustici
o detergenti aerosol.
•
Utilizzare un panno pulito inumidito in acqua
pura per la pulizia.
•
Utilizzare solo accessori compatibili con le
specifiche tecniche del dispositivo. Questi
possono essere forniti da Axis o da terze parti.
Axis consiglia l'uso dell'apparecchiatura di
alimentazione Axis compatibile con il dispositivo.
•
Utilizzare solo parti di ricambio fornite o
consigliate da Axis.
•
Non tentare di riparare il dispositivo da soli.
Contattare l'assistenza o il rivenditore Axis per
questioni relative alla manutenzione.
Trasporto
AAAVVISO
VVISO
VVISO
•
Durante il trasporto del dispositivo Axis, utilizzare
l'imballaggio originale o equivalente per evitare
danni al dispositivo.
Batteria
Una bassa carica della batteria influisce sul
funzionamento del RTC, facendolo resettare a ogni
accensione. Quando la batteria deve essere sostituita,
un messaggio di registro viene visualizzato nel report
server del dispositivo. Per ulteriori informazioni sul
report server, vedere la pagina Web del dispositivo o
contattare l'assistenza Axis.
Le batterie a bottone al litio da 3 V contengono
1,2-dimetossietano; etere dimetilico di glicole
etilenico (EGDME), CAS n. 110-71-4.
AVVERTENZA
•
Rischio di esplosione se la batteria viene
sostituita in modo errato.
•
La batteria può essere sostituita solo con una
batteria identica.
•
Le batterie devono essere smaltite in base alle
normative locali o alle istruzioni del produttore
della batteria.
Copertura a cupola
AAAVVISO
VVISO
VVISO
•
Fare attenzione a non graffiare, danneggiare
o lasciare impronte sulla cupola di protezione,
perché potrebbe diminuire la qualità
dell'immagine. Se possibile, tenere la protezione
in plastica sul coperchio della cupola fino a
quando l'installazione non sarà completata.
•
Non pulire il coperchio della cupola quando
allo sguardo sembra pulito e non lucidare la
superficie. Una pulizia eccessiva potrebbe
danneggiare la superficie.
•
Per la pulizia generale del coperchio della cupola,
si consiglia di utilizzare un sapone neutro o
detergente non abrasivo con acqua pura e un
panno morbido e pulito. Sciacquare bene con
acqua pura tiepida. Asciugare con un panno
morbido e pulito per evitare macchie d'acqua.
•
Non usare mai detergenti aggressivi, benzina,
benzene, acetone o sostanze chimiche simili.
•
Evitare di pulire il coperchio della cupola alla
luce diretta del sole o a temperature elevate.
•
Le cupole per i prodotti L presentano una
superficie anti-graffio. Evitare la rimozione
di impronte dalla superficie della cupola
poiché questo potrebbe danneggiare la qualità
dell'immagine.
Español
Instrucciones de seguridad
AAAVISO
VISO
VISO
•
Este producto de Axis debe utilizarse de
conformidad con las leyes y normativas locales.
•
Almacene el producto de Axis en un entorno seco
y ventilado.
•
Evite la exposición del producto de Axis a
choques o a una fuerte presión.
•
No instale el producto en postes, soportes,
superficies o paredes inestables.
•
Utilice solo las herramientas correspondientes
cuando instale el producto de Axis. La aplicación
de una fuerza excesiva con herramientas
eléctricas puede provocar daños en el producto.
•
No utilice limpiadores en aerosol, agentes
cáusticos ni productos químicos.
•
Limpie con un paño limpio humedecido con agua
pura.
•
Utilice solo accesorios que cumplan con las
especificaciones técnicas de su producto. Estos
accesorios los puede proporcionar Axis o un
tercero. Axis recomienda utilizar un equipo de
suministro de alimentación de Axis compatible
con su producto.
•
Utilice solo piezas de repuesto proporcionadas o
recomendadas por Axis.
•
No intente reparar el producto usted mismo.
Póngase en contacto con el servicio de asistencia
técnica de Axis o con su distribuidor de Axis para
tratar asuntos de reparación.
Transporte
AAAVISO
VISO
VISO
•
Cuando transporte el producto de Axis, utilice el
embalaje original o un equivalente para evitar
daños en el producto.
Batería
Un nivel bajo de batería afectará al funcionamiento
del reloj en tiempo real, lo que provocará el
restablecimiento de este cada vez que se encienda el
producto. Cuando sea necesario sustituir la batería,
aparecerá un mensaje de registro en el informe del
servidor del producto. Para obtener más información
sobre el informe del servidor, consulte la página web
del producto o póngase en contacto con el soporte
técnico de Axis.
Las pilas de botón de litio de 3,0 V contienen
1,2-dimetoxietano; éter dimetílico de etilenglicol
(EGDME), n.º CAS 110-71-4.
ADVERTENCIA
•
La sustitución incorrecta de la batería implica
riesgo de explosión.
•
La batería solo debe sustituirse por una batería
idéntica.
•
Las baterías usadas deben desecharse de
conformidad con la normativa local o las
instrucciones del fabricante.
Cubierta del domo
AAAVISO
VISO
VISO
•
Preste atención para no arañar, dañar o dejar las
huellas en la cubierta del domo, puesto que esto
puede provocar una disminución de la calidad de
imagen. Si es posible, mantenga el plástico de
protección en la cubierta del domo hasta que se
complete la instalación.
•
No limpie la cubierta del domo si parece a simple
vista que está limpia y nunca pula la superficie.
Una limpieza excesiva podría dañar la superficie.
•
Para realizar un procedimiento de limpieza
general de la cubierta del domo se recomienda
usar detergente o jabón neutros, sin disolventes y
no abrasivos mezclados con agua pura, y un paño
suave y limpio. Enjuague bien con agua pura
y tibia. Seque con un paño limpio y suave para
evitar las manchas de gotas de agua.
•
Nunca use detergentes abrasivos, gasolina,
benceno, acetona o productos químicos similares.
•
Evite limpiar la cubierta del domo a temperaturas
elevadas o en contacto directo con la luz solar.
•
Los domos para productos L incorporan una
superficie antiarañazos. Evite dejar las huellas
en la superficie del domo, ya que puede afectar
negativamente a la calidad de la imagen.
⽇本語
安全⼿順
注記
•
本製品は、お使いになる地域の法律や規
制に準拠して使⽤してください。
•
本製品は乾燥した換気のよい環境に保管
してください。
•
本製品に衝撃または強い圧⼒を加えない
でください。
•
本製品を不安定なポール、ブラケット、
表⾯、または壁に設置しないでください。
•
本製品を設置する際には、適切な⼯具の
みを使⽤してください。電動⼯具を使⽤
して過剰な⼒をかけると、製品が損傷す
ることがあります。
•
化学薬品、腐⾷剤、噴霧式クリーナーは
使⽤しないでください。
•
清掃には、きれいな⽔に浸した清潔な布
を使⽤してください。
Instruções de segurança
AAAVISO
VISO
VISO
•
O produto Axis deve ser usado em conformidade
com as leis e regulamentações locais.
•
Armazene o produto Axis em um ambiente seco e
ventilado.
•
Evite expor o produto Axis a impactos ou pressão
elevada.
•
Não instale o produto em suportes, mastros,
superfícies ou paredes instáveis.
•
Use apenas as ferramentas recomendadas ao
instalar o produto Axis. O uso de força excessiva
com ferramentas elétricas poderia danificar o
produto.
•
Não use produtos químicos, agentes cáusticos
ou limpadores aerossóis.
•
Use um pano limpo úmido para limpar o produto.
•
Utilize apenas acessórios que atendam às
especificações técnicas do produto. Esses
poderão ser fornecidos pela Axis ou por terceiros.
A Axis recomenda usar equipamento de fonte de
alimentação Axis compatível com seu produto.
•
Utilize apenas peças sobressalentes fornecidas
ou recomendadas pela Axis.
•
Não tente reparar o produto por conta própria.
Entre em contato com o suporte ou seu
revendedor Axis para quaisquer questões
relacionadas a serviços.
Transporte
AAAVISO
VISO
VISO
•
Ao transportar o produto Axis, use a embalagem
original ou equivalente para evitar danos ao
produto.
Bateria
Se a carga da bateria estiver baixa, a operação do
RTC será afetada, fazendo com que ele seja reiniciado
toda vez que o sistema for ligado. Quando for
necessário substituir a bateria, uma mensagem de log
será exibida no relatório do servidor do produto. Para
obter mais informações sobre o relatório do servidor,
consulte a página da Web do produto ou entre em
contato com o suporte da Axis.
As baterias tipo célula de íons de lítio de 3,0 V contêm
1,2-dimetoxietano; etileno glicol éter dimetílico
(EGDME), nº CAS 110-71-4.
ATENÇÃO
•
A troca incorreta da bateria poderá representar
risco de explosão.
•
A bateria deve ser substituída somente por uma
bateria idêntica.
•
Baterias usadas devem ser descartadas de acordo
com as regulamentações locais ou as instruções
do fabricante da bateria.
Cobertura dome
AAAVISO
VISO
VISO
•
Cuidado para não arranhar, danificar ou deixar
impressões digitais na cobertura dome, pois
isso poderia prejudicar a qualidade da imagem.
Se possível, mantenha o plástico protetor
na cobertura dome até que a instalação seja
concluída.
•
Não limpe uma dome que pareça limpo e jamais
faça o polimento da superfície. A limpeza
excessiva poderia danificar a superfície.
•
Para a limpeza geral de uma dome, recomenda-se
usar sabão ou detergente neutro não abrasivo
e sem solventes dissolvido em água e um pano
macio limpo. Enxágue bem com água limpa e
morna. Seque com um pano macio e limpo para
impedir o surgimento de manchas de água.
•
Nunca use detergentes agressivos, gasolina,
benzina, acetona ou produtos químicos
semelhantes.
•
Evite limpar a Cobertura dome sob luz do sol
direta ou em temperaturas elevadas.
•
As domes para os produtos L possuem uma
superfície antiarranhões. Evite deixar impressões
digitais na superfície dome, já que isso poderia
afetar a qualidade da imagem.
РУССКИЙ
РУССКИЙ
РУССКИЙ
Правила безопасности
УВЕДОМЛЕНИЕ
•
Устройство Axis должно использоваться
в соответствии с местными законами и
правилами.
•
Устройство Axis должно храниться в сухом,
хорошо проветриваемом помещении.
•
Не допускайте ударов или приложения
высокого давления к устройству Axis.
•
Не монтируйте устройство на неустойчивых
столбах, кронштейнах, поверхностях или
стенах.
•
При установке устройства Axis используйте
только предназначенные для этого
инструменты. Приложение чрезмерных
усилий к инструментам может привести к
повреждению устройства.
•
Не используйте химикалии, едкие вещества
или аэрозольные очистители.
•
Для очистки используйте чистую ткань,
смоченную чистой водой.
•
Используйте только принадлежности,
которые соответствуют техническим
характеристикам данного устройства. Они
могут поставляться компанией Axis или
сторонним производителем. Компания Axis
рекомендует использовать блоки питания Axis,
совместимые с устройством.
•
Используйте только запасные части,
поставляемые или рекомендованные
компанией Axis.
•
Не пытайтесь отремонтировать устройство
самостоятельно. По вопросам обслуживания
обращайтесь в службу поддержки Axis или к
своему реселлеру Axis.
Транспортировка
УВЕДОМЛЕНИЕ
•
При транспортировке устройства Axis
используйте оригинальную упаковку или
ее эквивалент во избежание повреждения
изделия.
Батарея
Низкий заряд сказывается на работе часов
реального времени: при каждом выключении их
настройки будут сбрасываться. Когда возникает
необходимость замены батареи, в отчете сервера
устройства появляется сообщение журнала.
Чтобы получить дополнительные сведения об
отчете сервера, см. веб-страницу устройства или
обратитесь в службу поддержки Axis.
Плоские литиевые батареи (3 В) содержат
1,2-диметоксиэтан; диметиловый эфир
этиленгликоля (EGDME), CAS №110-71-4.
ОСТОРОЖНО
•
Риск взрыва при неправильной замене
батареи.
•
Замену следует проводить только на
идентичную батарею.
•
Утилизация использованных батарей должна
выполняться в соответствии с местными
нормативными требованиями или указаниями
производителя батарей.
Купол
УВЕДОМЛЕНИЕ
•
Обращайтесь с куполом аккуратно. Старайтесь
не поцарапать и не повредить его, а также
не оставляйте на нем отпечатки пальцев,
поскольку это может снизить качество
изображения. По возможности не снимайте
с купола защитную пластиковую пленку до
завершения установки.
Не протирайте купол, если на нем не заметны
загрязнения, и ни при каких обстоятельствах
не полируйте его поверхность. Излишняя
очистка может привести к повреждению
поверхности.
•
Для общей очистки купола рекомендуется
использовать мягкую чистую ткань и
нейтральное мыло без растворителей и
абразивных веществ или смесь моющего
средства с чистой водой. После очистки
тщательно промойте купол чистой теплой
водой. Чтобы не допустить появления следов
от капель воды, протрите купол мягкой чистой
тканью.
•
Никогда не используйте агрессивные моющие
средства, например, бензин, бензол, ацетон
или аналогичные химические вещества.
•
Старайтесь не проводить очистку купола
при прямом солнечном освещении или при
повышенных температурах воздуха.
•
Поверхность куполов для изделий серии L
устойчива к образованию царапин. Старайтесь
не оставлять отпечатки пальцев на
поверхности купола, поскольку это может
снизить качество изображения.
中
中
中文
文
文
安
安
安全
全
全说
说
说明
明
明
注意
•
使用安讯士产品时应遵守当地法律和法规。
•
在干燥通风的环境中存放安讯士产品。
•
避免将安讯士产品暴露在冲击或高压环境
下。
•
请勿将产品安装在不稳固的立杆、支架、
表面或墙壁上。
•
安装安讯士产品时,仅使用适用的工具。
使用电动工具过度施力可能导致产品损坏。
•
请勿使用化学品、腐蚀剂或气雾剂。
•
使用蘸纯净水的干净布进行清洁。
•
仅使用符合产品技术规格的附件。这些附
件可由安讯士或第三方提供。安讯士推荐
使用与产品兼容的安讯士电源设备。
•
仅使用安讯士提供或推荐的备件。
•
请勿尝试自行维修产品。有关服务事项,
请联系安讯士支持部门或安讯士经销商。
运
运
运输
输
输
注意
•
安讯士产品运输途中,应使用其原包装或
等效包装,以防对产品造成损坏。
电
电
电池
池
池
蓄电池电量过低会影响实时时钟的运行,从而
导致实时时钟在每次上电时重置。当电池需要
更换时,产品的服务器报告中将显示一条日志
消息。有关服务器报告的更多信息,请参见产
品网页或与安讯士支持部门联系。
3.0 V 纽扣锂电池内含1,2-二甲氧基乙烷;乙二
醇二甲醚(EGDME),CAS 编号为110-71-4。
警告
•
如果未正确更换电池,则存在爆炸危险。
•
仅应更换上同型号的电池。
•
应根据当地法规或电池制造商的说明处理
废电池。
半
半
半球
球
球罩
罩
罩
注意
•
小心不要划伤、损坏或在半球罩上留下指
纹,因为这可能会降低图像质量。如果
可能,请保留半球罩上的保护塑料,直至
安装完成。
•
请勿清洁看起来干净的半球罩,也不要对表
面进行抛光。过度清洁可能会损坏表面。
•
对于半球罩的一般清洁,建议将无腐蚀
性、不含溶剂的中性肥皂或洗涤剂与纯水
混合,并使用柔软、干净的布进行清洁。
用温水冲洗干净。用一块柔软干净的布擦
干,以避免留下水渍。
•
切勿使用带有刺鼻气味的洗涤剂、汽油、
苯、丙酮或类似化学品。
•
避免在阳光直射或高温下清洁半球罩。
•
L 产品的半球带有防刮表面。避免在半球表
面留下指纹,因为这可能会影响图像质量。
한
한
한국
국
국어
어
어
안전지침
주의사항
•
Axis 제품은해당지역법률및규정을준수
하여사용해야합니다.
•
Axis 제품은건조하고환기가잘되는곳
에보관하십시오.
•
Axis 제품에충격이나강한압력을가하
지마십시오.
•
불안정한폴, 브래킷, 표면또는벽면에제
품을설치하지마십시오.
•
Axis 제품을설치할경우해당도구만사용
하십시오. 전동공구로과도한힘을사용하
면제품에손상을줄수있습니다.
•
화학물질, 부식제, 에어로졸세척제를사
용하지마십시오.
•
깨끗한물에적신깨끗한천을사용하여
닦으십시오.
•
제품의기술적사양을준수하는액세서리
만사용하십시오. 이러한액세서리는Axis
또는제3자가제공할수있습니다. Axis는
귀하의제품과호환되는Axis 전원장비사
용을권합니다.
•
Axis가공급하거나추천하는예비부품만
사용하십시오.
EGDME(ethylene glycol dimethyl ether), CAS
no. 110-71-4를포함하고있습니다.
경고
•
배터리를올바르게교체하지않으면폭
발위험이있습니다.
•
배터리는동일한배터리로만교체해야합
니다.
•
사용한배터리는해당지역규정또는배터
리제조업체의지침에따라폐기하십시오.
돔커버
주의사항
•
돔커버가긁히거나손상되거나지문이남
지않도록주의하십시오. 이는이미지품질
을저하시킬수있습니다. 가능하다면설
치가완료될때까지돔커버의보호플라
스틱을제거하지마십시오.
•
눈으로보기에깨끗한돔커버는닦지말고
표면에광을내지마십시오. 과도한청소는
표면에손상을줄수있습니다.
•
돔커버의전반적인청소를위해서는비마
모성, 무용제중성비누또는세제를섞은
깨끗한물그리고부드럽고깨끗한천을사
용하는것이좋습니다. 깨끗하고미지근한
물로잘씻어내십시오. 얼룩이남지않도록
부드럽고깨끗한천으로닦으십시오.
•
강력한세제, 휘발유, 벤젠, 아세톤또는유
사한화학물질을사용하지마십시오.
•
직사광선이비치거나온도가높은곳에서
돔커버를청소하지마십시오.
•
L 제품용돔은긁힘방지표면을제공합니
다. 이미지품질을저하시킬수있으므로
돔표면에지문이남지않게하십시오.
AXIS M32-LVE Network Camera Series
Date: September 2019
© Axis Communications AB, 2019
Part No. 2045090