Homestyles 88 5531 772 Assembly Instructions Manual

Home Styles Customer Service: www.homestyles-furniture.com, [email protected], 888-680-7460, 877-831-0319 Carton 88 5531 771 is also needed for assembly. IMPORTANT M3x19 Wood Screw for Leveler 16 pcs. (+1 extra) Connector 2 pcs. Leveler 4 pcs. Plug 4 pcs. (+1 extra) Hex Wrench 1 pc. M3 x1 .5 6 Wood Screw for Rod Support 8 pcs. (+1 extra) Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. 88 5531 772 Closet Wall Hanging Unit H. Front Rail 1 pc. O. Bottom 1 pc. K. Side Panel 1 pc. L. Side Panel 1 pc. M. Back Panel 1 pc. I. Rod 2 pcs. J. Plinth 1 pc. N. Back Panel 1 pc. Rod Support 4 pcs. M3x15 Wood Screw for Connector 8 pcs. (+1 extra) M3x25 Wood Screw (long) 7 pcs. (+1 extra) G. Top 1 pc.

STEP 1 Attach Rod Supports to Side Panels (C), (D), (K) and (L) with Wood Screws for Rod Support. (See Figure 1) Figure 1 D L C K Rod Support Wood Screw for Rod Support IMPORTANT  Use a soft cloth between these parts and the floor.  Do not use power tools above 8 volts to assemble.  Do not tighten all the bolts until each part is properly assembled.  The unit must be level to work properly. Use the included adjustable levelers to level.  Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future. Wood Screw for Rod Support Rod Support

STEP 3 Attach unit to Side Panel (L) with Wood Screws (long), then flip the locks. Attach Back Panels (N) and (M) to unit, then flip the locks. Attach Front Rail (H) to unit. Attach Side Panel (K) to unit with Wood Screws (long), then flip the locks. K H O J M Figure 2 STEP 2 Plinth Attach (J) to Bottom (O), then flip the locks. (See Figure 2) L Wood Screw (long) N

STEP 5 Attach Top (G) to unit with Wood Screws (long), then flip the locks. STEP 4 Attach Levelers to bottom of unit with Wood Screws for Levelers. (See Figure 3) Wood Screw (long) G Leveler Wood Screw for Leveler Figure 3

STEP 7 Attach Top (A) to unit, then flip the locks. A C E B D F STEP 6 Attach Back Panels (F) and (E) to Side Panel (D), then flip the locks. Attach Front Rail (B) to Side Panel (D). Attach Side Panel (C) to unit, then flip the locks.

STEP 8 Place top unit onto base unit, then flip the locks. Figure 6 Figure 5 STEP 9 Place unit at desired location. Note: If assembling multiple Closet Wall Units together, place all units at desired location. Level the unit(s) by adjusting the adjustable levelers on the bottom of unit(s). (See Figure 4) Note: Unit(s) must be level to proceed. Cover all holes with Plugs. (See Figure 5) Place Rod ( ) into position. (See Figure 6) I I I Figure 4 Plug

Hardware List STEP 10 Drill a 3/8” hole in wall in-line with the pre-drilled hole at top of unit. Move unit. Insert Anchor into the wall hole and attach Bracket with Wall Screw. Attach Bracket at pre-drilled hole at top of unit with Wood Screw. Move unit back into place. If assembling multiple Closet Wall Units together, go to and complete Step 11 now, then return to and complete Step 10. Slide Tipover Restraint through Bracket on wall and Bracket on unit. (See Figure 7) Put tie end of Tipover Restraint into lock end of Tipover Restraint and pull until tight. Anchor 1 pc. (+1 extra) Bracket 2 pcs. (+1 extra) Tipover Restraint 1 pc. (+1 extra) M3.5x40 Wall Screw 1 pc. (+1 extra) M3.5x16 Wood Screw 1 pc. (+1 extra) Figure 7 Wood Screw Wall Screw Bracket on wall Anchor in wall 3/8” wall hole Pre-drilled hole at top of unit Tie end Lock end Bracket at top of unit Tipover Restraint IMPORTANT  To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly. Top of unit Drill 3/8” hole in wall Pre-drilled hole at top of unit

STEP 11 Note: If assembling multiple Closet Wall Units together, complete Step 11. Attach the top of units together using Connector and Wood Screw for Connectors into the pre-drilled holes. (See Figure 8) Return to and complete Step 10. Figure 8 Wood Screw for Connector Connector

finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. NEVER CARE INSTRUCTIONS Do not use rubber based placemats. PREVENT DISCOLORING Do not use commercial waxes and polishes. PREVENT YELLOWING Do not place hot objects on surface. PREVENT FINISH DAMAGE Do not write directly on surface. PREVENT MARKING Do not use power tools above 8 volts to assemble. PREVENT CRACKING Do not place in direct sunlight. PREVENT FADING with a soft cloth moistened in lukewarm soap and water. Buff with a dry clean cloth. CLEAN Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at: www.homestyles-furniture.com/customer-service/replacement-parts Home Styles Customer Service: www.homestyles-furniture.com, [email protected], 888-680-7460, 877-831-0319