Dell 735N Update Manual

have been copied, the Service Account window displays. 20 In the User name and Password fields, enter the user name and password for the account that you want the system services to use. The user must have administrator privileges. 21 When the Previous Backup Exec Installation window displays, click OK. The VERITAS Windows NT/2000 Device Driver Installs Welcome screen displays. 22 Click Next. The Choosing Tape Drives window displays. 23 Make sure that Use VERITAS tape drivers for all ...

have been copied, the Service Account window displays. 20 In the User name and Password fields, enter the user name and password for the account that you want the system services to use. The user must have administrator privileges. 21 When the Previous Backup Exec Installation window displays, click OK. The VERITAS Windows NT/2000 Device Driver Installs Welcome screen displays. 22 Click Next. The Choosing Tape Drives window displays. 23 Make sure that Use VERITAS tape drivers for all ...

Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. WARNING: A WARNING indicates a potentially hazardous situation which, if not avoided, may result in severe injury. ____________________ Information in this document is subject to change without notice. © 2001 Dell Com ...

Installing ARCserve 2000 on the NAS Appliance NOTE: You must first attach a keyboard, mouse, and monitor to the system before you install ARCserve 2000. ARCserve 2000 cannot be installed or managed using Terminal Services. 1 Insert the ARCserve 2000 CD in the CD-ROM drive of the NAS appliance. The CD should autoplay. If it does not, open Windows Explorer and right-click the CD-ROM drive that contains the ARCserve 2000 software. Select Autoplay from the menu. The ARCserve 2000 Product Explorer window displays. 2 Expand ...

Installing ARCserve 2000 on the NAS Appliance NOTE: You must first attach a keyboard, mouse, and monitor to the system before you install ARCserve 2000. ARCserve 2000 cannot be installed or managed using Terminal Services. 1 Insert the ARCserve 2000 CD in the CD-ROM drive of the NAS appliance. The CD should autoplay. If it does not, open Windows Explorer and right-click the CD-ROM drive that contains the ARCserve 2000 software. Select Autoplay from the menu. The ARCserve 2000 Product Explorer window displays. 2 Expand ...

installed. 11 Click Next. The Select Type of Program Group window displays. 12 Select Common Program Group or Private Program Group and then click Next. The Setup Complete window displays. 13 Click Finish. 14 Remove the VERITAS Backup Exec CD from the CD-ROM drive. Using VERITAS Backup Exec 8.0 Remote Administrator 1 On the remote system, click the Start button and point to Programs→ VERITAS Backup Exec→ VERITAS Backup Exec. The Connect to Server window displays. 2 Enter the ...

• You cannot schedule a backup of a snapshot. You must do a manual backup of snapshot files because each snapshot file name is unique in that it includes the date and time (hour-minute-second) that the snapshot was taken. • When you restore a snapshot, you must redirect the restore to a location other than the original snapshot location. A restore to the original location will not be successful. ...

13 Click Finish. You are prompted to restart your system. 14 Click No. You will restart your system after completely installing the software. 15 In the ARCserve 2000 Product Explorer, expand the Service Pack 1 for ARCserve 2000 tree, click Update ARCserve 2000 Workstation/Advanced Edition, and then click Install. Follow the instructions to complete installation. 16 In the ARCserve 2000 Product Explorer, expand the Latest Updates tree, click Install Latest Updates, and then click Install. Follow the instructions to ...