La Crosse Technology 617-89577 Faqs

Page 1 617-89577 FAQS The links below will work in most PDF viewers and link to the topic area by clicking the link. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader CONTENTS 617-89577 FAQS ........................................................................................................................ 1 Power ........................................................................................................................................ 1 Clock Factory Restart ................................................................................................................ 1 Adjustable Backlight .................................................................................................................. 1 Mood Light ................................................................................................................................ 2 12-Hour Time Format ............................................................................................................... 2 Set Time Alarm ........................................................................................................................ 2 Manually Set Time: Program Menu .......................................................................................... 3 FM Radio ................................................................................................................................... 3 USB Charge Port ..................................................................................................................... 4 Backup Battery ........................................................................................................................ 4 Clock Has Distorted Display ..................................................................................................... 4 Power • This clocks powered by a 5.0 volt AC power adapter • 1 CR2032 battery backup, included in the package Clock Factory Restart 1. Remove battery and AC power from the clock. 2. Press one of the buttons on the clock at least 20 times to clear all memory. Verify that the clock is blank before proceeding. 3. Let the clock sit without power out for at least 10 minutes. 4. Insert the AC power cord in the clock. Adjustable Backlight Select High or Low: Press the button to select High or Low backlight. Adjust Low Brightness: Rotate the Dimmer Wheel on the side of your clock to adjust the brightness of the Low setting.

Page 2 Mood Light The Mood Light is below the clock, offering a gentle orange glow. Press the button to turn this light on or off. 12-Hour Time Format • This clock only displays in 12 hour time format. Set Time Alarm This Alarm Clock has a dual time alarm function. Use the following instructions to set your alarm times, choose your wake up sound (buzzer or radio), and alarm volume if you choose the radio option. Set Alarms: 1. Hold the button to enter the Alarm Settings. 2. Press the or button to adjust the values. Hold to adjust quickly. 3. Press and release the button to confirm and move to the next item. 4. Press the SET/MEM button anytime to exit. Alarm Settings Order: • Alarm 1 Hour • Alarm 1 Minutes • Alarm 1 Wake sound: bu (buzzer) or rd (Radio) • When rd (Radio) is selected: Alarm 1 HI/LO (volume) • Alarm 2 Hour • Alarm 2 Minutes • Alarm 2 Wake sound: bu (buzzer) or rd (Radio) • When rd (Radio) is selected: Alarm 1 HI/LO (volume) Activate/Deactivate Alarm 1 & 2: 1. Press the button to activate or deactivate Alarm 1 and/or Alarm 2. 2. The Orange LED Light next to the 1 or 2 indicates alarm is active.

Page 3 Turn Off Sounding Alarm: When alarm sounds. press the button once to stop the alarm for 24 hours. Snooze: When an alarm is sounding, press once, the alarm will be silenced and come on again after the snooze duration selected. Note: if your second alarm activates while the first alarm is sounding or it is in the snooze mode, the second alarm overrides the first alarm (the first alarm is reset to come on the next day). Manually Set Time: Program Menu TIP: Press only one button at a time while setting the clock. 1. Press SET/MEM again, the hour digits flash. Press the or button to set the current hour (hold to advance rapidly). The “PM” LED will appear on the lower middle time display to indicate the afternoon time; there is no AM indicator. 2. Press SET/MEM again, the minute digits flash. Press the or button to set minutes. (hold to advance rapidly). 3. Press SET/MEM again, the display shows “05” and flashes. Press the or button to select your snooze time from 5 to 60 minutes. 4. Press SET/MEM again (or if no key is pressed for approx. 10 seconds) to store the settings and return to normal time display mode. FM Radio 1. Extend the antenna for best reception. 2. Press the button to listen to the radio. ON will show briefly. 3. Press the or button to select station. Hold to search for next clear station. 4. Press to view Volume Setting. Press the or button to adjust Volume (1-16). 5. Press to turn radio off. Auto Scan and Store Preset Stations: 1. Press to listen to the radio 2. Hold to automatically scan and set 20 stations.

Page 4 Manually Store Preset Stations: 1. Press the button to listen to the radio. ON will show briefly. 2. Press the or button to select station. 3. Hold SET/MEM until P01 flashes to store as Preset 1. 4. Repeat steps 2 and 3 to set up to 20 Preset Stations. Note: You can change preset stations with the above instructions. Listen to Preset Stations: 1. Press the button to listen to the radio. 2. Press SET/MEM then or to select Preset Stations. Radio Sleep Timer: 1. When the radio is on, hold the sleep time “05” (5 minutes) will show. 2. Press repeatedly to select minutes from 05, 10,15, 30, 45, 60, 75, 90 or OFF. 3. The clock radio reverts to the time display automatically in a few seconds. Hold to see the sleep time remaining. 4. Press to deactivate the radio and the sleep function before the sleep time has elapsed. USB Charge Port Tip: This is a power-output charging port. It does not provide power to the alarm clock. Charge a smart phone, camera or other devices when the alarm clock is plugged into a power outlet with the included 5V adapter. • Connect your external device’s USB charging cable (not included) to • the USB charging port. • Charging times will vary. • USB Power Output: 2A maximum current. • Charge 2A devices or devices that are self- regulating. Remark: USB charging will shortly turn off when the clock searches for the atomic time signal. Charging will resume after WWVB reception is completed. Backup Battery • The backup battery does not power the alarm or display the time. • The backup battery will keep the time and settings in the event of a power outage. • A fresh CR2032 battery could backup your clock for around 1 week. Clock Has Distorted Display

Page 5 • On a brand new clock check for thin plastic films of printed scratch guard that may be on the upper and lower screen of the clock. This thin piece of plastic has printed numbers for store displays. • This film will be easy to peel off the LCD. • With all power removed the clock should be blank. • If numbers still appear, please check for scratch guard.