iOttie Easy One Touch Connect Quick Start Manual

Easy One Touch Connect Quick Start Guide | Installation Guide | Software Guide

This quick start guide will help you use your Easy One Touch Connect right away. For most up to date manual please vist: www.websiteTBD. For more detailed instructions or troubleshooting, please read the full installation and software manuals. 1. Assemble the mount. 2. Select a location in your car: Dashboard or Windshield. 3. Apply Dash Pad to flat surface. No Dash Pad is required for windshield or curved surface. 4. Apply Sticky Suction Cup to Dash Pad or desired area on windshield. 5. Connect to power. 1. Install both the iOttie Connect app and the Alexa app on your phone. 2. Make sure Bluetooth is enable, permissions are given for voice messaging, & location settings are enabled on your smartphone. Manuals should be followed in order: 1. Quick Start Guide 2.Installation, then 3. Software. Make sure that the iOttie Connect App & the Alexa App aren’t on at the same time. Device won’t connect to your phone if they are. Mounting Guide Software Guide 3. With the Alexa app closed, connect the iOttie Connect app to the Easy One Touch Connect to update firmware. 4. Close the iOttie app and log into the Alexa app with your Amazon log-in. 5. Add device as “headphones”. 6. In the set-up menu, select “Easy One Touch Connect” and select continue. 7. Select “done” and you can begin using Alexa in your car! Quick Start Guide “Alexa, get directions to prospect park.” “Getting directions to Prospect Park.” “Alexa, lock the front door.” “Locking the front door.” “Alexa, play my 90s playlist.” “Your playlist, 90s, on Amazon Music.” “Alexa, what’s the weather like today?” “Currently its 72 degrees woth clear skies and sun.” “Alexa, what time is it?” “It’s 10:34 AM.” Alexa Skills: Examples

Foot Foot Knob Mute Button Release Bars Suction Cup Dashboard Pad Locking Side Arms Lever Telescopic Knob Telescopic Arm Pivot Knob Dual Car Charger with Micro USB cable Microphones Easy One Touch Trigger Button Micro USB Port Cradle Knob What’s in the Box: Mounting Head, Base, and Dual Car Charger with Micro USB Cable Getting Started Critical Information For optimal mounting, please follow the detailed instructions within this manual. For most up to date manual please visit (website-TBD) For software installation, please see the “Software Manual.” iOttie is not liable for possible damages due to product misuse. The Easy One Touch Connect is mounted with a semi-permanent adhesive tape. Each base is one-time use only. Once removed, it cannot be re-mounted. When mounting, it is recommended that the surface & product be above 40° F. Manuals should be followed in order: 1. Quick Start Guide 2. Installation 3. Software Specifications Car Charger Specifications ITEM SPECIFICATIONS INPUT 5V - 1A CHARGING PORT Micro USB DEPTH 2.25” WIDTH 4.25” HEIGHT 3.6” WEIGHT 3.345 oz INPUT OUTPUT 12V~24V USB A 5V - 2.1A MICRO USB 5V - 1A

switch on the device. Once it is plugged in, the device will remain on unless the vehicle shuts off power when in parking mode. 1. Plug the micro-USB cable into the USB port on the back of the Mounting Head. 2. Insert Car Charger into your vehicle’s power port. Installation A. Connect the Mount Cradle with the Ball Joint. Choose desired mounting area and wipe any dust or debris from the surface. B. Then, tighten the Cradle Knob. 2. Selecting a Location 1. Assembling the Mount 2. Peel off the protective film on the Suction Cup and press mount firmly onto the dashboard pad. 3. Push Locking Lever down to engage suction. STICKY SUCTION CUP 1. For Dashboard or Flat Surface: Peel off the film on the dashboard pad & stick on the desired installation location.

1. Cradle Knob For landscape mode, loosen to rotate the Cradle. Tighten to lock. 3. Telescopic Knob Located on top of Telescopic Arm, loosen to extend the arm, and tighten to secure distance. 2. Foot Knob Located on the lower back of Cradle. Loosen to re-position mount’s foot up & down. 4. Pivot Knob Located on the side of the Mount Base, turning allows you to pivot telescopic arm. Tighten to secure position. Using the Easy One Touch Mechanism The Easy One Touch lock and release mechanism makes it simple to mount & retrieve smartphones in seconds. Mounting Releasing 1. Press the locking side arms in. Press the locking side arms with one hand and retrieve the device. 2. Press your device against the Easy One Touch trigger button. The mount’s arms will automatically close.

LED Lights Easy One Touch Connect Mounting Head Micro USB Port LED Lights Mute Button At a Glance Getting Started The Easy One Touch Connect supports access to more than 80,000 Alexa skills right from your vehicle. For most up to date manual please vist: www.websiteTBD For examples of skills, please see the “Quick Start Guide.” For an optimal experience, please follow the detailed instructions within this manual. For mounting instructions, please refer to the “installation manual.” iOttie is not liable for possible damages due to product misuse. Some Alexa Skills may require an Amazon Prime membership. Make sure your phone’s Bluetooth is on and connected to your car’s Bluetooth. For voice messaging, please allow permission settings by going to Contacts>Profile and Settings> Permission Alexa streams media instead of local files. Please note that this may use data. iOttie is not liable for data usage. The iOttie Connect app is needed to install the latest firmware. When updating firmware, make sure Alexa app is closed or the firmware won’t update. The Easy One Touch Connect with Built-in Alexa uses your data when not connected to wifi. A clear network connection is needed for Alexa to work, otherwise there may be delays or interruptions. iOttie is not liable for data usage. Manuals should be followed in order: 1. Quick Start Guide 2. Installation, then 3. Software. Microphones (on top of device) LED Lights Easy One Touch Connect Mounting Head Micro USB Port LED Lights Mute Button At a Glance Getting Started The Easy One Touch Connect supports access to more than 80,000 Alexa skills right from your vehicle. For most up to date manual please vist: www.websiteTBD For examples of skills, please see the “Quick Start Guide.” For an optimal experience, please follow the detailed instructions within this manual. For mounting instructions, please refer to the “installation manual.” iOttie is not liable for possible damages due to product misuse. Some Alexa Skills may require an Amazon Prime membership. Make sure your phone’s Bluetooth is on and connected to your car’s Bluetooth. For voice messaging, please allow permission settings by going to Contacts>Profile and Settings> Permission Alexa streams media instead of local files. Please note that this may use data. iOttie is not liable for data usage. The iOttie Connect app is needed to install the latest firmware. When updating firmware, make sure Alexa app is closed or the firmware won’t update. The Easy One Touch Connect with Built-in Alexa uses your data when not connected to wifi. A clear network connection is needed for Alexa to work, otherwise there may be delays or interruptions. iOttie is not liable for data usage. Manuals should be followed in order: 1. Quick Start Guide 2. Installation, then 3. Software.

on and off. a. Press and hold for 2-3 seconds to keep the device muted. Once placed in mute, the device will stay on mute. b. Just press the mute button again (don’t hold) to turn Alexa on. Pressing the mute button can also be used instead of the Wake Word. Using Alexa on the Easy One Touch Connect There will be no visual cue on the screen that announces the connection except that the color of the light should be blue. The Alexa app must be running in the background of your phone for the device to work. When app is re- opened, it will reconnect automatically. A wake word should always be used to ask Alexa anything. The wake word is simply “Alexa.” 1. Download the iOttie Connect app to make sure your Easy One Touch Connect has the most up-to-date firmware installed. The iOttie Connect app is available from the Apple App Store or the Google Play Store. 2. Once firmware is updated, close the iOttie Connect App. Software Setup Make sure that the iOttie Connect app and the Alexa app aren’t open at the same time! The device won’t connect to your phone if they are. 3. Download the Alexa app on your smartphone. The Alexa app is available from the Apple App Store or Google Play store. 4. Log into the Alexa App with your Amazon account. 5. Go to the Device menu and tap + add a device. 6. In the setup, scroll down on the “All Devices” list and select “Headphones.” 7. Select “Done.” 1. The mute button on the back of the mount turns Alexa on and off. a. Press and hold for 2-3 seconds to keep the device muted. Once placed in mute, the device will stay on mute. b. Just press the mute button again (don’t hold) to turn Alexa on. Pressing the mute button can also be used instead of the Wake Word. Using Alexa on the Easy One Touch Connect There will be no visual cue on the screen that announces the connection except that the color of the light should be blue. The Alexa app must be running in the background of your phone for the device to work. When app is re- opened, it will reconnect automatically. A wake word should always be used to ask Alexa anything. The wake word is simply “Alexa.” 1. Download the iOttie Connect app to make sure your Easy One Touch Connect has the most up-to-date firmware installed. The iOttie Connect app is available from the Apple App Store or the Google Play Store. 2. Once firmware is updated, close the iOttie Connect App. Software Setup Make sure that the iOttie Connect app and the Alexa app aren’t open at the same time! The device won’t connect to your phone if they are. 3. Download the Alexa app on your smartphone. The Alexa app is available from the Apple App Store or Google Play store. 4. Log into the Alexa App with your Amazon account. 5. Go to the Device menu and tap + add a device. 6. In the setup, scroll down on the “All Devices” list and select “Headphones.” 7. Select “Done.”

means that it is connected. Solid Blue Will turn on for a few seconds after saying the Wake Word. Dark Blue Thinking Red Mute Compatible With www.iottie.com [email protected] Links to details and app updates on Amazon page: https://www.amazon.com/gp/help/ customer/display.html?nodeId=201602060

review online, or connect with us on our social platforms. FR Si vous aimez votre produit iOttie, merci de nous le faire savoir en laissant un commentaire en ligne ou nous rejoindre sur nos réseaux sociaux. ES Si le gusta su producto iOttie, háganos saber dejando una reseña en línea, o conéctese con nosotros en nuestras plataformas sociales. www.iottie.com [email protected]