HeroSpeed LongPlus Quick Start Manual

2. Product appearance 3. Quick start 4. Power on/off and network congiguration 5. Set up the camera 6. Install the camera 7. Share the camera 8. Charge the camera 9. Indicator light status 10. Product specitication 11. Firmware upgrade 12. FCC warning 13. FAQ Contents 01 02 05 06 07 12 15 17 18 18 19 20 21 Quick Start Guide Please read the Quick Start Guide carefully before using the product and keep it. Related tools and documents of product, please download from www.herospeed.net

4. Mounting kit*1 5. USB charging cable *1 6. Operation instruction*1 01

03 02 Product appearance Microphone Infrared light Backshell open button Ambient light sensor Spotlight Lens Strong magnetic chuck Indicator light Human body infrared sensor Threaded bracket interface Speaker Power button Micro-USB port

powered supply and AC-powered supply. 1. Download and install the App The wireless smart battery camera supports Android and iOS App. For your best experience, please scan the QR code below with your mobile phone, install the app, and follow the instruction to complete the user registration. Press buttons on both sides, and pull out the back cover. Reboot hole Micro-SD card slot Android Download Download App Store

Sign in to App，connect to Wi-Fi and add the device according to the prompts (please bring the device close Long press the power button for 3s to power on/off the device. k r o w t e n e h t r e t n e o t n o tt u b r e w o p e h t k cil c e l b u o D When connecting the camera for the first time, use the App and follow the instruction to configure the camera network. Set up the camera 1) Click the "Add device" in the App and enter the Wi-Fi network name and password that you want the camera to connect.

supports the 2.4Ghz Wi-Fi with stronger wall penetration capability and does not support Wi-Fi for enterprise- level authentication currently. Please ensure that the entered Wi-Fi meets the requirements. After completion, click "Next Step" to generate the QR code for pairing the camera. 09 2) After pressing the camera switch for 3 seconds, the camera will turn on. At this moment, target the camera at the QR code of the mobile App, with a distance of about 20cm (about 7 inches) until the camera emits a "Di" sound, which represents the scanning is succeeded and the pairing is started. Power button about 7 inches (20cm)

of a successful connection. At this moment, please set the name for the device on the App and select the location you want to place the device. Click "Done" to complete the pairing. Possible problems with binding: When you hear the "Wi-Fi Password Error", please check whether the Wi-Fi password you entered in the App is correct; When you hear the "Authentication error", please ensure that your Wi-Fi network is not an enterprise- level network, and the device supports only the network with the security level below WPA-2; When you hear the "Wi-Fi not found", please check whether you select or enter the correct Wi-Fi name, and place the device near the Wi-Fi router and ensure that the router is powered on. Please note that 5Ghz Wi-Fi cannot be searched by the device; When you hear the "Retrieving IP timeout", it indicates that the number of devices connected to the router in your home is too many to connect more devices. Please remove some of the connected devices that are not commonly used or restart the router to clear the unconnected devices. You may need to contact the router administrator; When you hear the "Cloud service connection fail", please check whether your router is connected properly to the external network. When you hear this error prompt, it is common on the condition of network disconnection or that the selected router in your home is a local area network server. Please ensure that the network connection is normal, and try to temporarily

Remove the protective film on one side of the 3M adhesive and stick it to the mounting surface of the bracket. Then remove the protective film on the other side to fix the mounting bracket in the installation position. (The installation surface must be clean, smooth, and dry. It is not suitable for uneven wood, leather, or stucco walls. Please press and hold the bracket on the installation position for 3 minutes to achieve the best gluing performance) Use the drilling tool to punch holes on the wall according to the hole distance of the base. It is recommended to mark the holes on the wall with a pencil before drilling. Screw the expansion nut into the holes on the wall, and then connect the bracket to the expansion nut with Install the camera You can place the camera on a shelf or other surfaces to use, or you can install it on a wall to use. (1) Select a good spot for your camera About 15° downward Recommended height About 6 ft Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network. The PIR infrared sensor is more sensitive to movements across the camera's field of view than movements toward or away from the camera.

Attach the camera to the magnetic bracket, the best angle is about 15 degrees downward， then adjust the surveillance angle. Share the camera When you need to view the camera with other family members or friends, you can use this function. Only the administrator whose account is bound with the camera for the first time can share and set the device. Other members can only view the live or playbacks of the device. 1) Find the camera you want to share on the App camera setting page. Find the button and enter the sharing page. About 15 ° downward

sharing. Charge the camera App will remind you to charge your camera when the battery is low. Please use the Micro USB cable to plug into the 5V/1.5A charging adapter to charge the camera. During charging, the camera's indicator light is solid yellow, and when the camera is fully charged, the indicator light will turn into solid green. It will take 10 hours to fully charge the camera. 4) Scan the QR code on your mobile phone, and you will sharing will be completed after you agree.

Mode Status Working mode Blue Sleep mode Charging mode Yellow Fully charged mode Green Item Camera lens Field of view: 123° Image resolution Max. 2560×1440 Video bit rate Adaptive Storage media Micro SD card (Up to 128GB) Battery capacity 5200mAh/6700mAh * Adapter requirement 5V/1.5A Size 84×62×96(mm) Firmware upgrade When you connect your camera through the App, it will prompt you if the latest firmware is available. You can also manually check the firmware upgrade in the settings of the App. Please make sure that your camera is fully charged or connected to the power adapter before upgrading the the upgrading.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference. , d e v i e c e r e c n e r e fr e t n i y n a t p e c c a t s u m e c i v e d si h t ) 2 ( including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. A: Open the App and select your camera on the home page. Click the share button on the home page or the "Share" in the camera settings to enter the sharing page, and then click "Invite " to generate a QR code. Your friends can now get some of the access rights by scanning the QR code in your phone. 1.Q:Camera permission management: How to invite family and friends to use my camera together? 2.Q:Why doesn't the Wi-Fi name appear when I connect to Wi-Fi?

to turn on the "location permission" for the app in the system settings and change it to "allow when using." A: Please use a 2.4GHz wireless network. The device does not support the 5GHz wireless network. Meanwhile, please set the Wi-Fi authentication method to WPA2-PSK or other lower level of security method. A password is required. A: The built-in infrared lamp beads make the camera only show some dim red lights when night vision is activated, but the image quality is still clear under no light environment. A: After testing, the Wi-Fi connection distance can normally reach up to 150 meters in the open area. However, the actual situation depends on the strength of Wi-Fi and its surrounding environment (thick walls, electromagnetic devices, large metal objects will all cause interference to the Wi-Fi signals). If the camera connection signal is weak or unstable, please place the camera as close to the router as possible. A: If you set the duration as "Auto", when someone occurs in the view of the camera, it will start recording a video for up to 3 minutes. A: Click the icon in the upper left corner of the "Library" page to start filtering videos by category. Select the w e iv o t ” e v a S “ k cilc n e h t d n a e e s o t t n a w u o y y r o g e t a c the video playbacks. 4.Q:What are the requirements for Wi-Fi? 3. Q:Will the camera show red lights when night vision is activated? 5.Q:How far should the camera be placed from the router? 6.Q:What is the maximum length of recording time? 7.Q:How to quickly view videos by category? A: Long press the power bottom to restart the camera. If there is no response, you can open the back shell of the camera, and then open the rubber plug on the side then press the reset button with a pointed object to force the power off, then long press the power button to restart the camera. 8.Q: What should I do when the device is in malfunction?