Cuisinart BDH-2 Instruction Booklet
Read Online
Read the Cuisinart BDH-2 Instruction Booklet online using the built-in PDF viewer.
Text of the manual
The Cuisinart® Blade and Disc Holder provides
convenient, accessible and safe storage of all
Cuisinart® Food Processor (except DLC-X,
DLC-XP, DLC-5 and LPP models) accessories.
The unit holds: one stainless steel blade, one
plastic or metal dough blade, one detachable
disc stem, and three food processor discs.
The transparent cover locks to the base with
a tamper and child-resistant lock that will not
open if the Blade and Disc Holder should tip
over.
All blades and discs, like sharp knives,
should be stored out of the reach
of children.
The compact Blade and Disc Holder can
be used alone or in combination with the
Cuisinart® Disc Holder (model # DH-4).
OPERATING
THE LOCK
To open the child-resistant
lock, pull the knob out
d
d
INSERTING
ACCESSORIES
The Blade and Disc Holder stores a metal
blade in the left triangular cavity and a plastic
or metal dough blade in the lower center
triangular cavity. Hold each piece carefully by
the center hub, and insert with its upper blade
facing down. WARNING: DO NOT TOUCH
METAL BLADE, AS DOING SO MAY RESULT
IN INJURY.
The detachable disc stem fits in the round
opening in the upper center section of the
Blade and Disc Holder. Insert the disc stem
face down, with the rounded left side of the
semi-circular connector towards the back.
Icons embossed on the inside surface of the
Blade and Disc Holder show proper placement
of the blades and detachable disc stem.
03CU13011 BDH-2 IB 6/17/03 3:59 PM Page 2
There are three disc slots on the right side of
the Blade and Disc Holder. Each slot holds one
food processor disc securely, with disc cutting
blade totally protected behind a plastic barrier.
To insert a disc, hold it so the cutting side faces
left and the disc stem connector side faces
right. Grasp the disc by placing your thumb on
the edge of the disc and your fingers under the
center lock on the stem attachment plate.
This positions the disc for correct insertion into
Note: Discs with fixed stems will not fit into
the Blade and Disc Holder.
REMOVING DISCS
To remove a disc, grasp the disc by placing
your thumb on the edge of the disc and your
fingers under the center lock on the stem
attachment plate. Pull the disc straight out.
CAUTION: NEVER GRASP A DISC BY THE
BLADE EDGE.
CONNECTING TO
DISC HOLDER
For expanded storage capacity, the Cuisinart®
Blade and Disc Holder can be used with the
Cuisinart® Disc Holder (model DH-4). The two
holders were designed with similar lines and
curves to create an attractive storage center
when placed side by side. You can create any
combination of Blade and Disc Holders and
Disc Holders to suit your food processor
accessory storage needs.
CLEANING AND CARE
03CU13011 BDH-2 IB 6/17/03 3:59 PM Page 3
CUISINART® BLADE AND DISC HOLDER
LIMITED 1-YEAR WARRANTY
This warranty is available to consumers only.
You are a consumer if you own a Cuisinart®
Blade and Disc Holder which was purchased at
retail for personal, family or household use.
Except as otherwise required under applicable
law, this warranty is not available to retailers or
other commercial purchasers or owners.
We warrant that your Cuisinart® Blade and
Disc Holder will be free of defects in materials
and workmanship under normal home use for
1 year from the date of original purchase.
We suggest that you complete and return the
enclosed warranty registration card promptly
to facilitate verification of the date of original
purchase. However, return of the card is not
a condition of this warranty and does not elimi-
nate the need for the consumer to maintain the
original proof of purchase. In the event that you
do not have proof of purchase date, the pur-
chase date for purposes of this warranty will be
the date of manufacture
To facilitate the speed and accuracy of your
return, please also enclose $3.00 for shipping
and handling of the product.
California residents need only supply a proof of
purchase and should call 1-800-726-0190 for
shipping instructions. Please also be sure to
include a return address, description of the
product’s defect, product serial number and
any other information pertinent to the product’s
return. Please pay by check or money order.
Your Cuisinart® Blade and Disc Holder has been
manufactured to the strictest specifications and
has been designed for use only with authorized
Cuisinart® accessories and replacement parts.
This warranty expressly excludes any defects
or damages caused by accessories, replace-
ment parts or repair services other than those
which have been authorized by Cuisinart.
This warranty does not cover damage caused
by accident, misuse, shipment or other than
ordinary household use.
This warranty excludes all incidental or
consequential damages. Some states do
not allow the exclusion or limitation of these
damages so they may not apply to you
03CU13011 BDH-2 IB 6/17/03 3:59 PM Page 4